MODIFICATION
66 -- Luminex LX200
- Notice Date
- 5/11/2021 12:24:12 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- USDA ARS PWA AAO ACQ/PER PROP ALBANY CA 94710 USA
- ZIP Code
- 94710
- Solicitation Number
- 1034586
- Response Due
- 5/21/2021 9:00:00 AM
- Archive Date
- 06/05/2021
- Point of Contact
- BRIAN FIEN, Phone: 5093353349
- E-Mail Address
-
BRIAN.FIEN@ARS.USDA.GOV
(BRIAN.FIEN@ARS.USDA.GOV)
- Description
- COMBINED SYNOPSIS/SOLICITATION� This is a combined synopsis/solicitation for commercial items prepared in accordance with the procedures contained in FAR Part 12.6, Acquisition of Commercial Items,�and FAR�Part�13,�Simplified�Acquisition�Procedures,�as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.� This acquisition is for the selected contractor to provide�Luminex 200 System with�xPONENT�4.3 Software�deliverd�to 3003 ADBF, Pullman, WA 99164.� (A) The solicitation number is1034586�and is issued as a Request for Quotation (RFQ).� (B) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular�(FAC) Number�2021-05.� (C) This solicitation is issued as�UNRESTRICTED.�� (D) Description/Statement of Work/Specification:� This is a brand name requirement:� The LX200 is a flexible, flowcytometry based, analysis� system for assays based on�xMAP�magnetic and� nonmagnetic beads. The instrument may distinguish a� minimum of 1 to a maximum of 100 unique, preset� bead spectral addresses within a single sample. The� reader is driven by the�xPONENT�4.3 acquisition� software which provides a simple and flexible� interface for unit�s maintenance and operation.� Included Equipment� � LX200 Analyzer� � XYPTM Plate Handler and accessories� � SDTM Sheath delivery system� � PC with�xPONENT�4.3 and Windows 10.� � Flat Screen Monitor with Stand.� � Dimensions (inc. PC) 115x60x50 cm�s, Weight 49kg� (113lbs)� Included Ancillary Equipment� � Keyboard and Mouse� � Power cords� � Communication cables to connect analyzer with� computer and XYP plate handler� � 1L Sheath fluid container� � 1.2L Waste container� � Automated Maintenance Plate (AMP)� � 2 Sample Probes� � Sample probe height adjustment kit� � 96 well heating block� � 20L of Sheath fluid (1 box)� � LX200 Calibration Kit (Replacement reference� LX2R-CAL-K25) - Microspheres to calibrate the� LX200�. The convenient calibration kit contains� xMAP� calibrators for the LX200 classification and� reporter channels. A lot specific CD is included for� importing target values. The kit is intended to be used� with the AMP Plate. Strip wells are included with each� kit. Each kit provides 25 calibrations.� � LX200� Performance Verification Kit (Replacement� reference LX2R-PVER-K25) - Microspheres to verify� optics, fluidics, classification channels and reporter� channel. The kit is intended to be used with the AMP� Plate. Strip wells are included with each kit. Each kit� provides 25 verifications.� Onsite installation and training� (F) Date(s) and place(s) of delivery and acceptance:� 3003 ADBF Pullman, WA 99164� All items shall be sent FOB Destination.�� (G) FAR Provision 52.212-1, Instructions to Offerors-Commercial, is incorporated by reference and applies to this acquisition. Please see the attached RFQ terms and conditions for the submission requirements.� (H) Evaluation:� For the evaluation criteria, please see the attached RFQ terms and conditions.� (I) Offerors are required�to complete in full�FAR Provision 52.212-3, Offeror Representations and Certifications-Commercial Items,�with their offer�online at SAM:�www.sam.gov.��An offeror must state in their offer if they completed FAR 52.212-3 online and that is it up-to-date and valid.�See the�attached RFQ terms and conditions�for more requirements.� (J)�FAR Clause 52.212-4, Contract Terms and Conditions-Commercial Items,�applies to this acquisition. Please see the attached RFQ terms and conditions for its Addendum.� (K) FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items,�is incorporated and applies to this acquisition. Please see the attached RFQ terms and conditions that are applicable to the acquisition.� (L) A statement regarding any additional contract requirement(s) or terms and conditions (such as contract financing arrangements or warranty requirements) determined by the contracting officer to be necessary for this acquisition and consistent with customary commercial practices: N/A.� (M) The Defense Priorities and Allocations System (DPAS) and assigned ratings are not applicable to this solicitation.� (N) Date,�time�and place offers are due.� Offers are due by�5/21/2021�12:00pm PST.� Submit offers to the following e-mail address(es), by the offer due date and time:� Brian.Fien@usda.gov�
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/ca010447507b404082eb7089727efb8d/view)
- Place of Performance
- Address: Pullman, WA 99164, USA
- Zip Code: 99164
- Country: USA
- Zip Code: 99164
- Record
- SN05997603-F 20210513/210511230053 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |