SOLICITATION NOTICE
84 -- 84--Recruiter Gold Rings
- Notice Date
- 6/16/2021 8:58:54 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332813
— Electroplating, Plating, Polishing, Anodizing, and Coloring
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- KNOXUSARECG4-TRK0001
- Response Due
- 6/16/2021 8:00:00 AM
- Archive Date
- 12/13/2021
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is KNOXUSARECG4-TRK0001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021- 05. The associated North American Industrial Classification System (NAICS) code for this procurement is 332813 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-06-16 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Knox, KY 40121 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: ***First Article**** (Male Ring) The contractor shall provide a pre-production sample of 1 each male ring size 6.5 prior to producing the entire quantity. The sample is required within 15 calendar days of the Government providing a physical sample of the current ring, .ai files. The Government will have 5 calendar days to approve the sample. Custom Recruiter ring male size 6.5 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. The contractor shall obtain assay testing for first article approval. The contractor shall obtain assay testing for weight, density, and hardness and shall obtain testing to ensure there are no visible joints or seams, that stones meet specified size and that stone holes are straight with no taper at any point. The contractor shall submit testing reports, the actual ring(s) tested, and photos showing details of the rings to USAREC, G4, 1307 3rd Ave, Fort Knox, KY 40121. Email POC provided post contract award., 1, EA; LI 002: ***First Article**** (Female Ring) The contractor shall provide a pre-production sample of 1 each female ring size 4.0 prior to producing the entire quantity. The sample is required within 15 calendar days of the Government providing a physical sample of the current ring, .ai files. The Government will have 5 calendar days to approve the sample. Custom Recruiter ring female size 4.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 4.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 7x5 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. The contractor shall obtain assay testing for first article approval. The contractor shall obtain assay testing for weight, density, and hardness and shall obtain testing to ensure there are no visible joints or seams, that stones meet specified size and that stone holes are straight with no taper at any point. The contractor shall submit testing reports, the actual ring(s) tested, and photos showing details of the rings to USAREC, G4, 1307 3rd Ave, Fort Knox, KY 40121. Email POC provided post contract award., 1, EA; LI 003: Custom Recruiter ring male size 6.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 6, EA; LI 004: Custom Recruiter ring male size 6.5 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 5, EA; LI 005: Custom Recruiter ring male size 7.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 20, EA; LI 006: Custom Recruiter ring male size 7.5 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 6, EA; LI 007: Custom Recruiter ring male size 8.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 6, EA; LI 008: Custom Recruiter ring male size 8.5 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 5, EA; LI 009: Custom Recruiter ring male size 9.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 20, EA; LI 010: Custom Recruiter ring male size 9.5 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 2, EA; LI 011: Custom Recruiter ring male size 10.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 30, EA; LI 012: Custom Recruiter ring male size 10.5 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 5, EA; LI 013: Custom Recruiter ring male size 11.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 5, EA; LI 014: Custom Recruiter ring male size 11.5 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 10, EA; LI 015: Custom Recruiter ring male size 12.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 10, EA; LI 016: Custom Recruiter ring male size 12.5 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 5, EA; LI 017: Custom Recruiter ring male size 13.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box.**See full specifications and sample artwork in the attachments section., 2, EA; LI 018: Custom Recruiter ring male size 13.5 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-furnished artwork. The ring shall be set with a 12 x 10 millimeter (mm) oval shape Green faceted spinel synthetic Emerald. Ring shall be of closed construction and shall be made on an oval mandrel, straight stone hole with no taper at any point and have a narrow guard line or edge. Ring shall read �U S Army 1775 with a Star between the US Army and 1775 on each side� on bezel, with �the Recruiter Badge� logo on left shank and the Liberty Bell surrounded by 13 stars on the right shank. See the attached files for artwork. Detailed artwork will be provided at contract award. Rings shall contain no casting flaws or holes, no metal flashes or excess solder, no flawed/chipped/broken stones, no rough/uneven edges or tone and no uneven bezel settings. Ring shall contain no manufacturer�s markings other than the company mark/name. Rings shall be placed in Green velvet or simulated velvet covered metal presentation box with hinged lid permitting display of the Logos and stone of the ring. The presentation box shall be lined with white satin or satin-like material with Army Star imprinted in black on the inside lid. Presentation box will be placed in an additional box with lid and Ring Size clearly marked on each box. **See full specifications and sample artwork in the attachments section., 5, EA; LI 019: Custom Recruiter ring male size 14.0 of 4.6k weight or higher Gold or �Auralite� with a weight of no less than 10.5 grams. Ring shall have a high gloss (bright/lustrous sheen) polish inside finish; shall be hand chased so that no joint or seams are visible and shall be detailed as per Government-f...
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/1c5126529733440d8bdbcd1f183a52da/view)
- Place of Performance
- Address: 1307 3rd Ave , Fort Knox, KY 40121, USA
- Zip Code: 40121
- Country: USA
- Zip Code: 40121
- Record
- SN06034112-F 20210618/210616230124 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |