MODIFICATION
24 -- Mini Skid Loader- Topeka
- Notice Date
- 6/21/2021 8:47:45 AM
- Notice Type
- Solicitation
- NAICS
- 333924
— Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
- Contracting Office
- 255-NETWORK CONTRACT OFFICE 15 (36C255) LEAVENWORTH KS 66048 USA
- ZIP Code
- 66048
- Solicitation Number
- 36C25521Q0436
- Response Due
- 6/27/2021 9:00:00 PM
- Archive Date
- 08/26/2021
- Point of Contact
- Tracie L Raggs, Contract Specialist
- E-Mail Address
-
tracie.raggs@va.gov
(tracie.raggs@va.gov)
- Awardee
- null
- Description
- Statement of Work (Requirement) Requirement: The Groundskeeping department is requesting the purchase of a compact mini loader and attachments to be able to continue to improve the function and capabilities of the Department. Due to restrictions such as gate opening sizes, weight bearing capacities and limited space access, it is difficult to get machinery to the place where work needs to be performed. To minimize the need for additional unique service parts and ensure compatibility with existing service parts stock, the following specifications must be met: Loader must be at least 23 horsepower Gasoline fueled (no diesel) Wheel drive must be independent four-wheel drive (not chain drive). Hydraulic system should have at least two pumps. Two ground speeds. Minimum ground speed 0 mph - 3.7 mph or higher. Easy reach 4 stick fingertip hand controls for all functions of the machine. Hydraulic flow needs to have a minimum of a low-flow setting and a high-flow setting. There must be at least 10.8 g.p.m. at a minimum pressure of 3,000 p.s.i. for the High flow. Low-flow of no less than 4 g.p.m A Quick attach system for attaching/detaching various attachments to the machine. The air filter will be two stage, heavy duty, remote or better. The minimum ground clearance is 5.8 The maximum machine height is 54.6 for clearances overhead The maximum overall Length is 84.4 . The operating capacity minimum is 515 lbs. The reservoir capacity is 15 gallons or higher The rated tip capacity is at least 1030 lbs. Maximum machine weight 1600 lbs. The maximum allowable width is 40.5 with standard tires The maximum operating height is 105.3 The Hinge pin height of at least 66 Minimum dump height of 47 for dumping into our trailers. Dump angle is at least 34 degrees. Reach fully raised is at least 28 . Fuel tank capacity at least 11 gallons Engine oil capacity of 2.0 quarts minimum. The minimum Warranty is to be 2 years, 3,600 hours or better Adjustable pallet forks attachment specifications Fully adjustable from side to side. The minimum operating capacity is 335 lbs. Leveler attachment Flow through design Able to be utilized to carry materials or function as a work platform Buckets (2) specifications Minimum of 4 cubic feet capacity each Hardened steel cutting edge on both Optional tooth bar on one bucket for digging into hard ground Preferred height of 14 inches (must not be less than 10 tall but no taller than 18 ) Preferred length of 24 inches (can range between 20 at minimum and 28 at maximum) Max weight of 115 lbs. Four additional complete tires and rims maximum digging power tread design must match OEM tires supplied on the machine
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/41ed5be189b94ad092fb71832cb8af7d/view)
- Record
- SN06036862-F 20210623/210621230110 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |