SOLICITATION NOTICE
49 -- 49--Master IDIQ - Compartment Pressurization and Purge Set
- Notice Date
- 6/23/2021 12:20:16 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332710
— Machine Shops
- Contracting Office
- NAVAIR WARFARE CTR AIRCRAFT DIV JOINT BASE MDL NJ 08733 USA
- ZIP Code
- 08733
- Solicitation Number
- N6833521Q0274
- Response Due
- 7/9/2021 2:00:00 PM
- Archive Date
- 01/05/2022
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N6833521Q0274 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 332710 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit quotes. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-07-09 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Statement of Work. The NAWC-AD Lakehurst requires the following items, Purchase Description Determined by Line Item, to the following: Base Period of Performance: 07/14/2021 - 07/14/2024 LI 001: Compartment Pressurization and Purge Set, Part Number (P/N) 4106AS0320-1First Article Test (FAT) Unit In Accordance with Statement of Work and applicable Drawing(s), 1, EA; LI 002: Year One (1) Compartment Pressurization and Purge Set, Part Number (P/N) 4106AS0320-1 In Accordance with Statement of Work and applicable Drawing(s) Year 1 valid from date of award through 365 days., 7, EA; LI 003: Year Two (2) Compartment Pressurization and Purge Set, Part Number (P/N) 4106AS0320-1 In Accordance with Statement of Work and applicable Drawing(s) Year 2 valid from date of award through 730 days., 2, EA; LI 004: Year Three (3) Compartment Pressurization and Purge Set, Part Number (P/N) 4106AS0320-1 In Accordance with Statement of Work and applicable Drawing(s) Year 3 valid from date of award through 1095 days., 2, EA; LI 005: Technical Data Package (Not Separately Priced) In accordance with Statement of Work and Contract Data Requirements List(s) DD Form 1493(s), 1, Lot; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAWC-AD Lakehurst intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAWC-AD Lakehurst is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a quote on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Quote MUST be good for 60 calendar days after close of Buy. Shall be performed at the Government facility. Payment will be provided once invoices are submitted through the Government's Wide Area Workflow system at https://wawf.eb.mil/. Payment terms: Net 30 days. No contract financing will be provided for this effort. This request neither implies nor requests the commencement of any effort. Further, the Government shall incur no obligation whatsoever as a result of this proposal request if a contract is not executed. Interested parties shall submit a request for a drawing package and a valid DD2345 to george.ball1@navy.mil no later than 28 June 2021, 5 PM EASTERN. Late requests may not be considered. Drawings shall be delivered via DOD Safe to the vendor's secure data custodian listed on the DD Form 2345 on the next working day after the closing date of drawing requests. DFARS 252.211-7003 Item Unique Identification and Valuation applies to this procurement Award shall be made on a Lowest Price Technically Acceptable Basis. Award shall be made only to responsible vendors (FAR 9.1) who have submitted a technically acceptable quote in accordance with the terms of this solicitation. The Guaranteed Minimum and Maximum quantities are as follows: Compartment Pressurization and Purge Set, Part Number (P/N) 4106AS0320-1: Minimum 1 EA (FAT); Maximum 12 EA (production). Minimum quantities shall be fulfilled with the first Delivery Order. The Government has no obligation to order quantities beyond the guaranteed minimum.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/e425f1ff99b842cc892a788d2d379c26/view)
- Place of Performance
- Address: See Statement of Work.
- Record
- SN06040407-F 20210625/210623230111 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |