SOLICITATION NOTICE
36 -- 5B Uranium Hexafluoride (UF6) Cylinders
- Notice Date
- 7/1/2021 3:09:53 PM
- Notice Type
- Solicitation
- NAICS
- 332420
— Metal Tank (Heavy Gauge) Manufacturing
- Contracting Office
- IDAHO OPERATIONS OFFICE IDAHO FALLS ID 83415 USA
- ZIP Code
- 83415
- Solicitation Number
- 89243221RNE000022
- Response Due
- 8/2/2021 8:00:00 AM
- Archive Date
- 08/03/2021
- Point of Contact
- Marie J. Williams, Mark Payne
- E-Mail Address
-
williamj@id.doe.gov, paynemb@id.doe.gov
(williamj@id.doe.gov, paynemb@id.doe.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- PART I � THE SCHEDULE SECTION C DESCRIPTION/SPECIFICATIONS PERFORMANCE WORK STATEMENT C.1 PROJECT TITLE: Procurement of 5B Uranium Hexafluoride (UF6) Cylinders and Outer Protective Packaging. C.2 BACKGROUND: The Office of Nuclear Energy (NE) is sponsoring a three-year demonstration of the production of High-Assay, Low Enriched Uranium (HALEU), 19.75% weight percent U-235. As part of that sponsorship, NE is committed to provide the UF6 cylinders that will be used to store the HALEU produced by the demonstration. The cylinders will be needed on-site at the HALEU demonstration facility in Piketon, Ohio. Further, in order to enable off-site shipment of the filled UF6 cylinders, NE will also procure outer protective packages licensed to carry/transport filled 5B UF6 cylinders enriched to 19.75 weight percent U-235. C.3 SCOPE: A total of fourteen (14) 5B UF6 cylinders with valves installed and two (2) outer protective packages are required to be provided in accordance with ANSI standards and NRC requirements. C.4 APPLICABLE DOCUMENTS: The fourteen (14) 5B UF6 cylinders are required to be fabricated and prepared according to ANSI N14.1 (2012), �Uranium Hexafluoride � Packaging for Transport,� and the normative references contained therein. The 5B cylinders shall be provided with the valves installed in accordance with ANSI N14.1 (2012) and with special attention to the cleaning and drying requirements of ANSI N14.1 (2012) Appendix A. The government requires the certifications listed in ANSI N14.1 (2012). The two (2) outer protective packages will be designed, fabricated, and certified in accordance with the requirements in ANSI N14.1 (2012) and NRC requirements for such packages. C.5 PERFORMANCE REQUIREMENTS: The contractor shall provide informational documents and images/drawings of the product being proposed. The contractor shall provide all documentation specified in ANSI N14.1 covering the design, fabrication, and testing of the cylinders (with valves) and the outer protective packages.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/49faf726856148dd8e2be18d71c042cf/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN06049456-F 20210703/210701230118 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |