SOURCES SOUGHT
59 -- Air Force Band Studio Audio System Updates
- Notice Date
- 7/5/2021 6:12:01 AM
- Notice Type
- Sources Sought
- NAICS
- 334310
— Audio and Video Equipment Manufacturing
- Contracting Office
- FA7060 11TH CONTRACTING SQ PK WASHINGTON DC 20032-2110 USA
- ZIP Code
- 20032-2110
- Solicitation Number
- FA706021Q9997
- Response Due
- 7/12/2021 2:00:00 PM
- Archive Date
- 07/13/2021
- Point of Contact
- Diane Feguer
- E-Mail Address
-
diane.feguer@us.af.mil
(diane.feguer@us.af.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The 11th Contracting Squadron is seeking small business concerns capable of providing the equipment and performing the installation�to upgrade�the audio systems in the Air Force Band Studios on Joint Base Anacostia-Bolling. Below is a description of the work to be performed.� If capable and interested in receiving the RFQ please fill out the attached Sources Sought Form. Concert Band Studio and Singer�s rehearsal studio: ? Remove old console, desk and rack. ? A new console will be installed in a custom desk alongside a 46 space equipment rack. ? Rack to be assembled and loaded with new and existing equipment. All equipment to be patched. ? Three cat6, two 50 ohm BNC and two 75 ohm BNC lines to be run through existing cable path and conduit from the concert band hall to the singer� studio across the hallway and terminated. ? RF Antennas mounted in both the Hall and studio ? 4rea4 Controller and A?168 stage rack to be mounted in the Singer� Studio Max Impact Studios: - Remove old console, desk and rack. - A new console will be installed in a custom desk with equipment racks below. - Equipment in the rack to be loaded and properly patched. - Take down existing four loudspeakers from the ceiling and remove old wiring and rigging. - Install four loudspeakers from the ceiling and subwoofers on the ground - Install new speaker patch plates in the wall and run cable from the plates to the speakers in the ceiling. Airman of Note Studio: ? Remove old console, desk and rack. ? A new console will be installed in a custom desk with equipment racks below. ? Equipment in the rack to be loaded and properly patched. ? Take down existing four loudspeakers from the wall and remove old wiring and rigging. ? Mount four loudspeakers on the walls ? Install new speaker cable from rack in custom desk to the loudspeakers. This may require surface mount wire molding. ? Install speaker connection plates on the wall for future subwoofers ***Existing hardware in studios includes but is not limited to Sennheiser, Digico, Klang, l'acoustics, and Wisycom.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/5db3e1135b6142b08e7766ed106a2779/view)
- Place of Performance
- Address: Bolling AFB, DC, USA
- Country: USA
- Country: USA
- Record
- SN06051198-F 20210707/210705230105 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |