SOLICITATION NOTICE
13 -- 13--Team Equipment 2
- Notice Date
- 7/9/2021 5:28:18 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- FBNC23AML0003
- Response Due
- 7/14/2021 2:00:00 PM
- Archive Date
- 01/10/2022
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FBNC23AML0003 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 333517 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-07-14 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Bragg, NC 28310 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: 300 WM Mag, compatible with M2010/CTSR Remington proprietary magazine. AW .300 Win Mag (5-shot) FOR AW RIFLES AND AICS CHASSIS IN .300 WM. Manufactured from steel with special coatings for durability and corrosion resistance. Springs and risers are removable for cleaning. Part No. 0479, 20, EA; LI 002: Glock 17 MAGS 17rd magazine. manufacturer brand name prefered., 209, EA; LI 003: Larue Tactical 7.62/SR-25 Mag 2 Pack 20 rd capacity SKU: LT762-20RD-MAG, 36, EA; LI 004: Nightforce Flip-Up cap, Eyepeiece, Tan, 25x, 12, EA; LI 005: Proctor Sling The PROCTOR SLING is a very strong yet lightweight, minimalist 2 point adjustable sling that comes with all mounting hardware necessary to attach to a variety of long guns (AR-15, Shotgun, Precision rifles, AK-47, Hunting Rifles etc). The PROCTOR SLING only weighs 2.4 ounces and there is no extra hardware to buy. The PROCTOR SLING comes with everything you need to attach to a variety of guns. This offers huge savings over other slings on the market. The sling is fully adjustable, and excess webbing stores on itself providing a super minimalist sling option for shooters. You won�t find any other like it. The sling is 1 inch wide providing proven all day operational comfort with less bulk. The PROCTOR SLING comes in Black, Marpat Brown, Multicam and Multicam Black. The PROCTOR SLING is 100% made in the USA with Mil Spec and Berry compliant, 30, EA; LI 006: Safari Land 6354DO Holster Right ALS/SLS Mid-Ride Level III Retention Duty Holster. Room for sight and light., 39, EA; LI 007: Safari Land 6354DO Holster Left ALS/SLS Mid-Ride Level III Retention Duty Holster. Room for sight and light., 8, EA; LI 008: TAC-MAG Rare Earth Magnet with pouch. The TacticalTECH TAC-MAG is a handy magnetic retention device that can free up a hand during entries / searches. The strong rare earth magnet can hold a fully loaded shotgun., 60, EA; LI 009: QD Sling Swivel Push-button quick-detach sling swivel MAG540 Push-button quick-detach sling swivel for 1-1/4"" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with the MS1 Sling for a dedicated two-point sling, or with an MS1 MS4 Adapter for a two to one-point convertible sling. Made in the USA., 88, EA; LI 010: Dewalt 5 in 1 Multi-Tacker Stapler and Brad Nailer Multi-Tool Model #DWHTTR510 This versatile, durable tool can drive five types of fasteners, giving you the ability to take on a range of jobs. You'll get increased flexibility from the high/low power switch, for use with a number of applications. Use the integrated wire guide to fasten wires and cables. Drives 5 different types of fasteners for superior versatility on the jobsite High/low power switch provides increased flexibility for a wide array of applications Integrated wire guide makes fastening cable and wire quick and easy Interchangeable belt clip fits on belts and pockets of both left and right-handed users Uses DEWALT heavy-duty staples DWHTTA700 series, Stanley TRA700 series, or arrow T50 heavy-duty staples up to 9/16 in. (14 mm) in length Lightweight die-cast aluminum housing design for durability Uses Stanley 18-Gauge brads up to 5/8 in. (16 mm) in length Uses Stanley round crown staples CT100 series or arrow T25 series up to 9/16 in. (14 mm) in length Uses Stanley light duty staples TRA200 series or arrow JT21 series up to 3/8 in. (10 mm) in length Uses Stanley flat narrow crown staples CT200 series or arrow T20 series up to 9/16 in. (14 mm) in length Fires narrow crown staples, 3, EA; LI 011: Arrow t50 1/2in staples 1,000 Pack, 7, EA; LI 012: Military 3"" Aimpoint Dot Training Target SKU VB-320 500 Pack Designed for the US Military to provide training for rifle, carbine, & pistol. Features 3"" circles with 1"" square center aiming points.Size: 23"" x 35"", 8, EA; LI 013: Military 6"" Aimpoint Dot Training Target SKU VB-660 Six-6"" circles with 1"" square center aim point in each circle. Black. 500 Pack Size: 23"" x 35., 7, EA; LI 014: Target Pasters-Black 1,000 per box., 3, EA; LI 015: Target Pasters-White 1,000 per box., 3, EA; LI 016: Federal Air Marshal Service Qualification Target (Version 6) SKU: LEAM-6 Pack of 500, 1, EA; LI 017: Man Firing Rifle Terrorist Photo Target SKU: 8RT Pack of 500, 1, EA; LI 018: Man Pointing a Pistol Terrorist Photo Target SKU: 15RT Pack of 500, 1, EA; LI 019: Man w/ Arms Up Terrorist Photo Target SKU: 7RT Pack of 500, 1, EA; LI 020: US Army TRADOC Die Cut Photo Terrorist Target (Version 2) SKU: TRADOC-2 Pack of 500, 1, EA; LI 021: US Army TRADOC Die Cut Photo Terrorist Target (Version 4) SKU:TRADOC-4 Pack of 500, 1, EA; LI 022: US Army TRADOC Die Cut Photo Terrorist Target (Version 7) SKU: TRADOC-7 Pack of 500, 1, EA; LI 023: VTAC Double Sided Tactical Target Pack of 500 PN: VTAC-P, 3, EA; LI 024: Man in Overalls w/ Gun Split Second Target SKU: LE-12 Pack of 500, 1, EA; LI 025: SFAUC-HP Targets. Pack of 500, 1, EA; LI 026: SFAUC-LP Targets. Pack of 500., 1, EA; LI 027: Man w/ Female Hostage Split Second Target SKU-LE-10 Pack of 500, 1, EA; LI 028: VIP Protection Target (Version 4) SKU: VIP-4 Pack of 500, 1, EA; LI 029: Doors Hollow Core 36""x80"" with door knob and hinge cut outs., 20, EA; LI 030: Standard Door Knobs, 20, EA; LI 031: Standard Hinges, 40, EA; LI 032: 45 Degree Offset for AR red dot., 12, EA; LI 033: Action Target E-50 Silhouette Steel Target (AT-128) The E-50 Silhouette is the first commercially available target from Action Target capable of handling .50 BMG rounds and is the only steel target on the market made from 1/2"" AR550 armor steel. Designed according to U.S. Marine Corps steel target specifications with a 20-degree angled shooting surface and standard military E-type silhouette proportions, this target is made for everything from heavy military firearms training to long-range rifle shooting. With a patent pending stand design that keeps the target grounded even with the biggest of ammunition, you don't need to worry about using sand bags to keep it upright or going downrange to reset it. The E-50 Silhouette's unique design allows the target head to be easily attached without any hardware using convenient bolt handles and slots through which the stand slides. The target head sits loosely on the stand to help absorb impact while providing a reverberating ""clang"" for instant audible feedback even hundreds of yards away for accurate shots. NOTE: The center stand and feet are made of mild steel and are not intended to withstand the force of a bullet. Shooting the stand and feet may result in damage. Specifications: - Height: 64"" - Weight: 146 lbs. - Torso Dimensions: 40"" x 19.5"" - Steel Grade: 1/2"" AR550 - Handgun Shooting Distance: 10 yards+* - Rifle Shooting Distance: 100 yards+*, 8, EA; LI 034: SR-21C Three Bull's-Eye Training Target SKU SR-21C3A The SR-21C3A provides three standard bull's-eye targets stacked vertically on one target sheet allowing for multiple shooting drills without having to go downrange to change out targets. - Ink: Black - Size: 23"" x 35"" - Bull's-Eye Dimensions: 10.5"" x 10.5"", 3, EA; LI 035: 10? Round Steel Target and T Post Mount 10? Round Target and T Post Mount. Target Mounts Directly on to the T Post Mount. Made from Solid 3/8� AR500 Rated to 30.06 at 100 yards., 20, EA; LI 036: PT Scout Target Circle - 12"" (AR550) SKU 801-29174 The PT Scout Rifle-Rated Target Plates are designed with durability and sound in mind. Each plate features a 3/8"" thick heavy-duty AR550 steel plate. We provided grade 8 carriage bolts that are hard enough to shed bullets and last longer than other bolts. Should extensive use wear down your plate, it is reversible--easily performed with the 3/4"" wrench we built into the foot of the PT Scout stand. With the target mounted to the PT Scout stand and 2x4, projectiles are directed safely and predictably down and away from shooters. The large footprint and balanced center of gravity keep your target upright. For larger calibers or uneven terrain, staking locations are also provided on the PT Scout stand feet. Range Masters and Match Directors can have confidence that they are using the safest steel targets ever produced. Working with the world's best shooters this system is built for the competitive environment and has been proven by shooter's like Max Michel, Rob Leatham and Law Enforcement training agencies. Action Target purchases more AR550 steel than anyone because we build ranges to stop and catch bullets all over the world. Our steel is plasma cut on a water table, reducing heat affected zones. The through bolts and the attached spring steel bracket enhance the sound, dramatically improving hit recognition by shooters and score keepers - making the sound of hits clear from long distances. Changing target heads is simple and easy, requiring no tools on the range. We offer multiple shapes and sizes for every competition and shooter. We proudly provide targets designed for PRS, 3-Gun, IDPA, IPSC, USPSA, SASP, Steel Challenge and many other competitive organizations. Features: - 3/8"" AR550 steel - Reversible target plates - Grade 8 Bolts - Multiple shapes and designs - Factory painted target plate - Zinc plated bracket to prevent corrosion and rust - Recommended for rifle calibers up to .308 from 100 yards and beyond - Max recommended muzzle velocity 3000 fps at 100 yards, 14, EA; LI 037: C Zone Steel W/ Hanger, 18, EA; LI 038: GTG Baseline Paper Shooting Target Pack of 100 SKU: SKU: GTGBaseline100 The GTG Baseline Target was designed to give individual shooters, units and agencies an alternative to the classic hitfactor targets which are overwhelmingly being used for daily/weekly training. ? The GTG Baseline Targets supports a wide variety of standardized drills and tests created by reputable firearms instructors, which can all be found as downloadable PDF files on the DOWNLOAD page. GTG Baseline Targets measure 58x89 cm and are printed on durable 200 g/sqm paper. The GTG Baseline Target is one of the best paper shooting targets for anyone looking for a training solution that offers multiple training scenarios. The shooting target offers both traditional and non-traditional overlays that allow you to run a wide variety of pistol and rifle shooting drills, tests and exercises. - 23 x 35"" - Printed in the USA, 3, EA; LI 039: FN SCAR 17S .308 20-Round Factory Steel Magazine PN: 98890-20 Caliber: 308 Winchester, 7.62 x 51mm Capacity: 20-Round Manufactured by FN Herstal, these black standard capacity magazines ensure perfect fit and function for your SCAR. Featuring durable steel construction, heat treated Chrome-silicon internal wire, and DuPont Zytel polymer followers, each SCAR magazine is designed to deliver reliability you can trust your life to., 12, EA; LI 040: LET Economy Paper Target Stand SKU #ECNO Economy Target Stand. � Can accommodate paper, cardboard or plastic targets/backers up to 25"" wide. � Incorporates 2"" x 2"" wood stick holders. � Target length and height are determined by length of the sticks. � All steel construction., 8, EA; LI 041: Grenade Launcher Holster HK GLM/M320 Retention System Right P/N: GLH-003 All plastic design that mounts onto MOLLE Rubber padding for noise reduction and Secondary Bungee retention system included O-Ring on barrel puck to keep dust and debris out of the grenade launcher barrel Left or Right side versions available Modularity utilizing Gear Retention Track� (GRT), 4, EA; LI 042: Grenade Launcher Holster HK GLM/M320 Retention System Left P/N: GLH-003 All plastic design that mounts onto MOLLE Rubber padding for noise reduction and Secondary Bungee retention system included O-Ring on barrel puck to keep dust and debris out of the grenade launcher barrel Left or Right side versions available Modularity utilizing Gear Retention Track� (GRT), 4, EA; LI 043: IPSC/USPSA Cardboard Torso Target SKU IPSC-CB IPSC Targets - Official USPSA/IPSC CARDBOARD target.White on one side and brown on the reverse. - Size: 18"" x 30"", 7, EA; LI 044: M64 Training Frag Body, 32, EA; LI 045: 1LT of CLP, 2, EA; LI 046: NRA 25-Yard Slow Fire Pistol bull's-eye Target (B-16) (Orange Center) HEAVY TAGBOARD PAPER Black and Orange Size: 10 1/2"" x 12"". Pack of 500., 1, EA; LI 047: 2ft Bungee Cords, 4, EA; LI 048: 4 ft Bungee Cords, 4, EA; LI 049: 6 Ft Bungee Cords, 4, EA; LI 050: 8 Ft Bungee Cords, 4, EA; LI 051: 10 ft Bungee Cords, 4, EA; LI 052: Ratchet Straps 27ft x 2 in heavy duty ratchet straps, 10, EA; LI 053: Dummy Round 5.56, 20, EA; LI 054: Dummy Rd 9mm, 10, EA; LI 055: Mechanix Wear MSV-55-008 : Tactical Specialty Vent Covert Tactical Work Gloves (L, All Black), 8, EA; LI 056: Mechanix Wear MSV-55-008 : Tactical Specialty Vent Covert Tactical Work Gloves (XL, All Black), 6, EA; LI 057: Orange Spray Paint 24oz 12 Pack, 2, EA; LI 058: Jager .223/5.56X45 MAGAZINE SPEED LOADER-BLACK. SKU: SL001 223/5.56x45 Magazine Speed Loader-BLACK. Made from durable engineering-grade nylon polymer, our heat and impact resistant .223/5.56 Magazine Speed Loaders offer a reliable method for speedy re-loads. By simply placing the bottom half of the loader on top of an empty magazine, inserting a loaded stripper clip into that bottom portion then pushing down on the rounds with the magnetic-tipped ""plunger"", the operator can re-load an empty magazine within seconds. When the operator pulls the plunger out, the magnetic tips extract the now empty stripper clip for future use. REVIEWS DETAILS, 16, EA; LI 059: UpLULA� � 9mm to 45ACP universal pistol mag loader The UpLULA� loader is a military-grade, pocket-size, universal pistol magazine loader and unloader designed to load and unload virtually all* 9mm Luger up to .45ACP single and double stack magazines of all manufacturers. It also loads most .380ACP single and double-stack mags, and 1911�s mags. The UpLULA� loader self-adjusts to the magazine and loads it easily, painlessly, and reliably !, 13, EA; LI 060: The Works Tool Kit Get our Torque Limiter, AR15 Field Maintenance, and Accessory Bits all in one Kit! This kit contains numerous bits and accessories designed to help maintain your AR-15, tighten down your optics and rifle parts to the correct torque, and work on pistols and shotguns as well. Includes the following specialty parts / bits: T-Handle Wrench 65 Inch Lbs miniature torque limiter 45 Inch Lbs miniature torque limiter 25 Inch Lbs miniature torque limiter 15 Inch Lbs miniature torque limiter 1/2"" Socket and Bit Adapter Universal Choke Tube Wrench 1911 Bushing Tool Glock Front Sight Bit Mini Pry-Bar Bolt Carrier Group Scraper Metal Pin Punch Castle Nut Wrench Bronze Scraper Steel Pick Non-Marring Plastic Pin Punch Cleaning Brush Bit A2 Front Sight Adjustment Bit Set of Brass Cleaning Rods (can accept 8-32 threaded attachments) Set of two bit adapters to allow for 8-32 threaded components 24 Chrome Plated 1/4"" Bits: [hex 2.5mm, 3mm, 4mm, 5mm, .050, 5/64, 3/32, 1/8, 7/64, 9/64, 5/32, 3/16, 1/4] T8, T10, T15, T20, T25, T27, T30, P1, P2, [slotted 3/16, 3/32] Magnetic Patch Soft Carrying Case Soft carrying case has molded in bit holder that is designed to hold any bit / accessory with a standard 1/4"" Base (including Fix It Sticks Torque Limiters), and any 8-32 threaded component. Be prepared at the Range or in the Field., 3, EA; LI 061: Red Spray Paint 24oz 12 Pack, 2, EA; LI 062: MAG PUL CTR M4 Buttstock FDE Milspec SKU:MAG310 Platform AR10, AR15, M4, M16, M110, SR25 Compatibility Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others* LOP, M4 Collapsed ~10.5 in. LOP, M4 Extended ~13.8 in. LOP Adjustment Range 3.3 in. Length, max 6.9 in. Weight 8.8 oz. Weight, w/ receiver extension 12.8 oz Other Specs *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. If you have a Commercial-Spec extension on your rifle, make sure to order the Commercial-Spec CTR. Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. Friction lock performance may vary depending on the host receiver extension's dimensional tolerances., 3, EA; LI 063: LaRue Tactical Picatinny Riser LT101VFZ SKU: SKU: LT101-VFZ, 36, EA; LI 064: Training Flashbang Body, 44, EA; LI 065: Crye Precision Pouch Zip on Panel S.M, 12, EA; LI 066: Pistol Mag Extenders, ZEV/TARREN, 25, EA; LI 067: Lens Cap for PVS-31 Dual lens, 37, EA; LI 068: ProTimer IV Super Part #: CEI-2300, 8, EA; LI 069: Safe Xtract SX-20000 Vehicle Recovery Kit PN: SX-20000 Contains 7/16"" x 60' Winch line (One) 7/16""x60' Wench Line extension (One) 3""x10' Tree Saver (Two) 7/8"" x20' Kinetic Recovery Rope 7/16"" x 10' Soft Shackle (four) 3/8"" x 12' Safety Lanyard (two) Pully Block (one) X-Lock (One) Medium SX Gear Bag (One) Splicing Tool (One) Winch Line Lock (One), 1, EA; LI 070: Dewalt 20V MAX* 9-Tool Combo Kit PN: DCK940D2 DCD771 20V MAX* Lithium Ion 1/2"" Compact Drill Driver DCF885 20V MAX* Lithium Ion 1/4"" Impact driver DCS381 20V MAX* Lithium Ion Reciprocating Saw DCS393 20V MAX* Lithium Ion Circular Saw DCS355 20V MAX* Lithium Ion Oscillating tool DCL040 20V MAX* Lithium Ion LED work light DCG412 20V MAX* Lithium Ion 4-1/2"" Grinder DCR006 20V MAX* Bluetooth Jobsite Speaker DCD740 20V MAX* Lithium Ion 3/8"""" Right Angle Drill 3 Year Limited Warranty, 3, EA; LI 071: Dewalt Black and Gold Drill Bit Sets PN: DW1163 135� Split point tip design to help reduce walking High Speed Steel to be used in plastic, wood, and metal Tapered web design for extreme durability and resisting breakage Black and gold coating to help prevent rust and wear 3-Flats shank to reduce spin-out in the chuck* Size markings on the drill bit shank for identifying sizes quickly, 9, EA; LI 072: Collapsable Halligan Tool PN: H-DT-P Halligan head with a Prying Adz and Spike Our Best Selling Halligan Flat Striking Face to Enhance First Hit Response Head is Drop Forged from High Alloy Steel and Heat Treated for Maximum Strength Deep Hard Anodized Coating Light Weight Provides a Tactical Advantage by Reducing Overall Weight Collet Locking Chuck Provides 360� of Gripping Force around the Shaft Premium Quality Ti-6Al-4V Alpha-Beta Titanium Shaft Handle Constructed of High Grade Heat Treated Aluminum Anti Slip Knurl Pattern Cut into the Handle for a Positive Grip Designed and Built by Master Breacher Lanyard Connection in the End Cap Other Unique Proprietary Features used only by Double-Tap, 6, EA; LI 073: Viking Tactics Light Double Tap Hammer Product Code: LDTH-P Our Light Weight hammer is the lightest breaching hammer on the market. It was specifically designed for the Special Operations community where its light weight provides a tactical advantage. Its premium collet chuck locking handle and Ti - 6Al - 4V Alpha-beta titanium shaft ensures that it will stand up to the harsh breaching environment. The head uses our patent pending Double-Tap technology that delivers more impact force into your target and helps to reduce vibration in the handle. This allows the operator to carry a lighter tool, reducing his overall load. The head is constructed of high-grade heat-treated aluminum and has stood up to the abusive tactical breaching environment and has proven to last for a very long time. This is also our best selling hammer., 2, EA; LI 074: Master Pull W4000EX Humvee winch recovery kit The kit includes: 1: 50ft Superline XD� winch extension w/ hook 1: 10ft Super-Yanker� bridle 1: 15ft grade 80 chain w/ CM chain hooks 4: Heavy duty Van Beest shackles 3: Sealed bearing swing blocks 2: Rock guards 1: Carrying bag, 1, EA; LI 075: MAXTRAX MKII Safety Orange PN: MTX02SO Set of 2 The original trademark color: MAXTRAX MKII Safety Orange� -the iconic MAXTRAX color. It�s easy to see in almost any condition, and it looks great mounted on any vehicle. Sold as a pair with two leashes to help you pull them out of the muck. Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud. Dimensions: 45 inches long and 13 inches wide. Weight: 8lbs each (Total shipped weight, 17lbs) Height for two stacked: 3.3?, four stacked: 4.6?, 3, EA; LI 076: Raptor Combo Connector Demo Clips OTA-312, 950, EA; LI 077: Breachers Tape GE-BT-30ML 30mils Thick - Specially designed extremely aggressive adhesive tape. Breachers Tape� creates an immediate super strong bond between the charge and the target on most all surfaces and most weather conditions, even extreme COLD and WET. It holds where others fail! Breachers Tape adhesive will not absorb any moisture it comes in contact with. Therefore, as long as any moisture between the adhesive and target surface can be ""squeezed out"" with a little pressure (ie metal, sealed wood, painted surfaces, etc.), Breachers Tape will still bond., 32, EA; LI 078: Gorilla Tape Standard 30yd roll., 80, EA; LI 079: Commercial Electric 7 mil Vinyl Electrical Tape - Black (10-Pack), 8, EA; LI 080: Duck Pro1.88 in. x 60 yds. Silver All-Purpose Duct Tape, 41, EA; LI 081: Husqvarna 967348101 K970 III ACTIVE 16"" GAS CUT-OFF SAW SKU:HUS-967348101 Husqvarna 967348101 K970 III ACTIVE 16"" GAS CUT-OFF SAW features: Easy to start thanks to Air Purge and decompression valve. The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life. Efficient vibration dampening reduces vibrations to less than 5 m /s�, for more convenient operation. DEX � water-saving wet cutting kit for efficient dust management. Fuel indicator in the tank shows fuel level, to help avoid unnecessary downtime. Husqvarna 967348101 K970 III ACTIVE 16"" GAS CUT-OFF SAW specifications: Manufacturer: Husqvarna Model No.: 967348101 Category: Husqvarna Cylinder displacement: 5.71 cu.inch Power output: 6.5 hp Vibrations front handle: 3.1/3.7/2.5 m/s� Vibrations rear handle: 5.4/4.5/3.5 m/s� Sound pressure level at operators ear: 104 dB(A) Sound power level, guaranteed (LWA): 114 dB(A) Blade diameter: 12/14/16 "" Max cutting depth: 4/5/6"", 2, EA; LI 082: Fire Hooks Unlimited WIDE-ADZ Pro Bar Halligan Forcible Entry Tool, 30"" SKU: W-FH-WA-PRO30 he Wide-Adz Pro-Bar is a one-piece drop forged tool with an extra 1� added to the 2� adz for a total of 3� in width! This modification makes inward forcible entry a breeze. Great for overhauling debris with the wide adz and extra strike surface. Length: 30�, weight: 13 lbs. Derived from the best selling Pro-Bar Drop forged, one piece alloy steel construction 3� adz Great for forcible entry and overhauling Length: 30�, weight: 13 lbs. The right tool to tackle a hundred critical tasks at the fire scene. Pry, pound, puncture, twist, cut open, or remove all types of barriers between emergency service personnel and endangered lives. Feel confident using this tool to break through doors, locks, and obstructions. Open up ceilings, walls, floors, and moldings with power, speed and effectiveness. Nowhere else in the United States will you find a forcible entry tool quite like the original PRO-BAR and the new WIDE-ADZ PRO BAR. Developed by the Forcible Entry Instructor of the N.Y.F.D. this Halligan-type forcible entry tool was the result of years of research and countless interviews with fire chiefs and firefighters in the F.D.N.Y. and many other large and small departments located in the eastern section of the U.S., 3, EA; LI 083: 1""x2""x8' lumber #2 Grade, 450, EA; LI 084: #9 x 3 in. Philips Bugle-Head Coarse Thread Sharp Point Polymer Coated Exterior Screw (25 lb./Pack) by Grip-Rite, 8, EA; LI 085: 2""x4""x8ft #2 Lumber, 90, EA; LI 086: 1/4"" RTD Plywood, 40, EA; LI 087: Klein Tools 5-Piece Torx Screwdriver Set- Cushion Grip Handles Screwdriver Set includes T15, T20, T25, T27 and T30 size tips Screwdrivers have color-coded cushion grip handles for quick ID TORX screwdrivers with corrosion-resistant chrome plated shafts, 7, EA; LI 088: Fiberglass Sickle Stick-Black SKU: GHS-1 Use of an extendable pole to maintain standoff has been used by EOD for decades. This Sickle Stick design came out of the Marine Corps experience in the Helmand province of Afghanistan, where the ability to check ground disturbances from a distance was life saving. The Detonation Technology Fiberglass Sickle Stick provides this capability in a compact and light weight package. The Sickle head uses a unique double sided design that is optimized for different ground types. For soft sand the large single blade will dig in, enabling an operator to find deeper buried items. The Sickle head uses a unique double sided design that is optimized for different ground types. For soft sand the large single blade will dig in, enabling an operator to find deeper buried items. The pole is a light weight but sturdy fiberglass unit that uses a friction lock method. Collapsed length is 25?, extended length is 159?, and it weighs 2.25 lbs. The advantage to the operator is less bulk and speed of use. Anything that involves threads or twist-to-lock knobs becomes more challenging to use in the dark and wet under combat conditions. This all is part of the DetTech philosophy of designing tools around the operator on the ground at 0300 in knee deep mud carrying 110lbs of gear., 7, EA; LI 089: HAL-1 Hook and Line Kit Kit includes: (1) Pouch with webbing pocket and 50? of 1/2? webbing. (1) Grapple (DTGH-24) (2) Forceps (1) Remote Pull Grips (1) Hook Knife (HK-4) (2) Mini Breakaway Pulley (BP-4) (2) Three Eye Slings (1) Speed Reel w/100? of 5/64? Line SKU: HAL-1, 7, EA; LI 090: HAL Expansion Kit The HAL Expansion Kit adds capability and versatility to the Hook & Line kit you�re already using. The kit includes: (1) Four Tine Folding Grapple (DTGH-2) (1) Remote Pull Grips (DTVG) (2) Hook Knives (HK-4) (2) Mini Breakaway Pulleys (BP-4), 7, EA; LI 091: Detonation Technologies Snap Hook Made from 7075 Aluminum. Large enough to fit other remote pull tools. Smaller than a climbing carabiner, and eye prevents rotating around on the end of the line. 2-3/8 x 1-1/8 x 3/16, weighs .3 oz. SKU: SH-1, 14, EA; LI 092: Detonation Technologies Compact Non-Contact Probe The non-conductive probe provides more digging ability than a standard round probe, and can be safer to use than a steel knife under some circumstances. These are a consumable item, depending on the soil type and use the tip will wear down over time, so there is no lifetime warranty on the non-conductive probes. 5? Blade, 8-7/8? overall, 1/4? thick, weighs 1.5oz SKU: DK-4, 8, EA; LI 093: 3.25'' Ceramic Blade Folding Knife with TC4 Titanium Handle 6008 CNC machined Titanium handle with polished black ceramic blade. Ambi thumb stud make it friendly to left and right handed. Deep carry tip down pocket clip and lanyard hole make it flexible for different personal carrying preference. Frame lock. Reminder: Ceramic blades are sharp, but they are also fragile due to the high hardness, so they are not suitable for pry, or cut on hard objects. Overall Length: 7.7"" Handle Length:4.3"" Blade Length: 3.4'' Blade Thickness: 0.087"" Net weight:2.5 OZ Package: 3.5 OZ., 12, EA; LI 094: 40MM 12 RD BELT TACTICAL TAILOR, Multicam, 50023-5 Our 40mm Belt will hold 12 rounds of any 40mm ammunition, such as HE, DP, shotshell or Lum rounds. Rounds are held in place by elastic loops and secured by a hook and loop flap. The adjustable belt can be worn around the waist or slung across the body. Available in MultiCam�, Coyote Brown, Black and OD., 4, EA; LI 095: Grip-Rite#2 x 3 in. nails 25lb pack, 1, EA; LI 096: 10 ft. x 10 ft. White Commercial Instant Canopy-Pop Up Tent with Wall Panel by Everbilt Outdoor events such as fairs, farmers markets, craft shows or tailgate parties are better with the Everbilt Commercial 10 ft. x 10 ft. Instant Canopy-Pop Up Tent. It is easy to operate with a central hub for easy 1-hand open and close operation. It's designed to provide great shade and sun-protection to block UV rays. It incorporates a side wall for versatility for up to 12 people to enjoy at any event or activity. The one-piece powder-coated steel frame with push button legs makes for easy height adjustment. The Everbilt 10 ft. x 10 ft. Commercial Instant Canopy is easy to set up, take down, store and transport anywhere with the durable wheeled bag included. 1 removable wall panel included Push button legs allows for easy height adjustment 300D rated top fabric provides great shade and sun-protection for UV rays Water resistant canopy top Versatile commercial design and color great for any business requirements Wheeled bag, guide ropes and stakes included 1-year limited warranty Drain hole design incorporated into the canopy top to minimize water pooling Air vent allows air flow and temperature control, 6, EA; LI 097: STANLEY FATMAX 020800R 4-in-1 Mobile Work Station The Stanley Fatmax 020800R 4-in-1 Mobile Work Station will make a handy addition to a home or shop with its functional design. It has four storage solutions in one, including a tool box, part bin, portable tray and oversized lower bin for larger items. The Stanley mobile work station features a patented, tiered, cantilever multi-level rolling system that allows for easy access to all of the storage areas at the same time. It's made with a durable structural foam construction with extra-large heavy-duty metal latches with a pad lockable eye and heavy-duty rubber-coated 7"" wheels for maximum stability. The Stanley 4-in-1 mobile work station provides plenty of options for storing tools and gear. The organizer with removable dividers can be arranged to accommodate small parts and hand tools. Additionally, the spacious and sturdy bottom bin can hold large, heavy items, such as a power tool with room to spare.The portable work station also has a V-groove track on the top of the lid that can help secure lumber, pipe and other materials for easy sawing and cutting. This item features a telescopic handle and heavy-duty wheels for easy maneuverability. For further convenience, a simple pull-up motion of the front latch opens the unit and provides easy access to its contents. When the Stanley Fatmax 020800R 4-in-1 Mobile Work Station is pushed closed, a large front latch locks the unit automatically. Stanley Fatmax 020800r 4-in-1 Mobile Work Station: 4 storage solutions in 1 includes tool box, part bins, portable tray and oversized lower bin for larger items Patented, tiered, cantilever multi-level rolling system allows easy access to all 4 storage areas at the same time Stanley mobile work station has a sturdy structural foam construction Telescopic handle for easy maneuvering Easy latch system includes a quick push-to-close feature Large front latch that locks the entire unit Ball bearing slides for smooth operation, even under heavy loads V-groove on top of lid holds materials, such as lumber and pipes, in place for cutting, 2, EA; LI 098: Pelican 80QT Elite Wheeled Cooler-Tan Pelican Products, Inc. is proud to announc...
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/c4b77b79bda84a52a6e4dcdda1d1f94c/view)
- Place of Performance
- Address: X6066 African Lion Blvd ATTN: PBO/ CW2 Pleitez, Fort Bragg, NC 28310, USA
- Zip Code: 28310
- Country: USA
- Zip Code: 28310
- Record
- SN06056715-F 20210711/210709230117 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |