SOLICITATION NOTICE
J -- Ux Validator Test Set Repair
- Notice Date
- 7/12/2021 6:41:46 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 811219
— Other Electronic and Precision Equipment Repair and Maintenance
- Contracting Office
- FA8552 AFLCMC WIUKB ROBINS AFB GA 31098-1670 USA
- ZIP Code
- 31098-1670
- Solicitation Number
- FA855221R0010
- Response Due
- 8/12/2021 1:30:00 PM
- Archive Date
- 08/27/2021
- Point of Contact
- Gregory Hendricks, Phone: 478-508-7362, Gerry Reeves, Phone: 404-996-8923
- E-Mail Address
-
gregory.hendricks.3@us.af.mil, gerry.reeves@us.af.mil
(gregory.hendricks.3@us.af.mil, gerry.reeves@us.af.mil)
- Description
- This Solicitation is for the repair of test sets used in conjunction with the Ux Validator during maintenance on the HH-60G helicopter. These test sets are add-ons that can be used in conjunction with the Ux Validator tester, but are not part of the tester itself. This effort is planned as a Firm Fixed Price (FFP), three year requirements type contract.� NSN� � � � � � � � � � � � � � Basic Quantity� �Option 1 Quantity� �Option 2�Quantity� � Total Quantity 6625-01-529-3346� � ��6� � � � � � � � � � � � � � 6� � � � � � � � � � � � � � � � � � � �6� � � � � � � � � � � � � � � � � �18 4920-01-616-5489� � � 4� � � � � � � � � � � � � � 4� � � � � � � � � � � � � � � � � � � �4� � � � � � � � � � � � � � � � � �12 4920-01-592-6411� � � 2� � � � � � � � � � � � � � 2� � � � � � � � � � � � � � � � � � � �2� � � � � � � � � � � � � � � � � �6 5930-01-607-7256� � � 2� � � � � � � � � � � � � � 2� � � � � � � � � � � � � � � � � � � �2� � � � � � � � � � � � � � � � � �6 Test Set Descriptions: Instrument Display System (IDS) pod set (USAF): PICA: USAF NSN: 4920-01-616-5489 Part #: 12-1002-01 The IDS, used in conjunction with the engine and subsystem sensors (temperature, pressure, torque, fuel, and RPM), provides the pilots with engine and subsystem monitoring. The IDS gives continuous indications of the parameters on vertical scales, digital readouts, and status lights. The system consists of a Pilot's display unit (PDU), co-pilot's display unit, and central display unit (CDU), on the instrument panel, No.1 Signal Data Converter (No.1 SDC) and No. 2 SDC, on the shelf front of the instruments panel, and a rotor over speed reset switch, in the avionics compartment. Since the PDU and CPDU are identical, and the No.1 and No. 2 SDCs are identical, the IDS consists of three basic units: PDUs, SDCs, and the CDU. The theory of operation is subdivided into power distribution, faceplate lighting, sensor signal processing, descriptions of the Central Display Unit (CDU) and the Pilot's and Copilot's Display Units, display lighting control, and system interface. STAB/SAS test set PICA: Army (SICA:USAF) NSN: 6625-01-529-3346 Part #: 05-0330-07 ARMY Part Number Air Force part number per TO 2.1: 70700-20650-047 Reduces maintenance and improves aircraft system reliability� ��� �Graphical view of the stabilator actuator feedback voltage� ��� �Real-time diagnostics� ��� ��Wiggle� mode intermittent Fault locator ��� �Compatible with all Army, Navy, and Air Force Legacy H-60 Aircraft� � The H-60 Stabilator/SAS Test set stabilator test displays the stabilator actuator position graphically on the Ux Validator screen to easily view the feedback from the system. �Both No. 1 and No. 2 signal paths are displayed simultaneously providing maintainers with complete system interoperability. � Stabilator Position Sensor/Limit Switch pod set PICA: Army (SICA:USAF) NSN:��5930-01-607-7256 Part #:��10-1009-56 � ��� �Required for M Model Maintenance as Part of H-60M PGSE DSK ��� �On-Aircraft and Bench Adjustment Solution in a single set ��� �Reduces Maintenance and improves aircraft system reliability ��� �Stabilator Position within �0.2� Accuracy� ��� �Allows for Single, �Install-and Forget� Adjustment� � The H-60A/L/M Stab Position/Limit Switch Test Set, when used with an Ux Validator, allows the maintainer to verify and adjust the stabilator position sensor and limit switch settings while on either the aircraft or on the bench. � Instrument Display System (IDS) pod set (Army) PICA: Army (SICA:USAF) NSN:��4920-01-592-6411 Part #:��06-0125-65 SPECIFIC FOR ARMY � ��� �Reduces troubleshooting and repair times ��� �Allows for on-aircraft diagnosis of the VIDS system� ��� �Simulates SDC input signals for display on cockpit CDU/PDU �� � Engine, Fuel quantity, rotor, transmission ��� �Eliminates need for external meters and jumpers� ��� �Single person operation � The H-60 Instrument Display system Pod set, when used with the Ux Validator, simulates signals to both SDCs, which in turn, synthesizes these signals to be displayed on the CDU/PDU in the H-60A/L cockpit. �The IDS pod set simulates the following signals for input into the SDCs: �Torque, TGT, Ng, RPM, Engine Oil Pressure and Temperature, Rotor Speed and Fuel Quantity. �The torque, TGT, Ng, RPM and Engine oil pressure and temperature are simulated for both engines. The Ux Validator user interface displays the signal levels for the engine, fuel quantity, rotor and transmission in relation to what should be indicated on the aircraft CDU/PDUs for on-aircraft diagnostics. � � An Ux Validator is needed to operate the Limit Switch/Stabilator Position Sensor Set, but it is not part of the set. The Ux Validator family of test solutions delivers versatility, ease-of-use and reliability. The Ux Validator, in conjunction with the test sets included in this effort, is used to test various avionics systems on the HH-60G.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/7773825d204247d89be398c9fbfd3f58/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN06057836-F 20210714/210712230116 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |