SOURCES SOUGHT
59 -- 1 NSN SOURCES SOUGHT NOTICE
- Notice Date
- 7/12/2021 9:39:44 AM
- Notice Type
- Sources Sought
- NAICS
- 334290
— Other Communications Equipment Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX21R0138
- Response Due
- 7/20/2021 10:00:00 AM
- Archive Date
- 08/04/2021
- Point of Contact
- Scott Knowles, Phone: 6146920639
- E-Mail Address
-
Scott.Knowles@dla.mil
(Scott.Knowles@dla.mil)
- Description
- **********************SOURCES SOUGHT NOTICE - NO SOLICITATION IS BEING ISSUED AT THIS TIME *********************** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. �***************************************�NO SOLICITATION IS BEING ISSUED AT THIS TIME****************************************** The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below.� Please review the below NSNs and provide us with any additional sources that are able to manufacture these items.� Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information.� All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil.� Phone 614 692-0639. We thank you in advance for your assistance. NSN / ITEM DESCRIPTION����� ������������������� ��������������� NSN:5996-00-100-4932 AMPLIFIER, AUDIO FREQUENCY RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RD002: COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT:� � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS ���� LISTS (QML).� THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A ���� SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR ���� QUALIFIED MANUFACTURERS LIST (QML).� QUALIFICATION REQUIREMENTS IN ���� PROCUREMENT NOTE H02 ""COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED ���� MANUFACTURERS LIST (QML)"" APPLY. ZD087: THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML ���� REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE ���� QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE ���� QPL(S)/QML(S). IF THE APPLICABLE (OEM OR MILITARY) DRAWING, ���� SPECIFICATION, STANDARD, OR QUALITY ASSURANCE ���� PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY ���� LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER ���� SHALL BE REDUCED TO ZERO (0). FOR EXAMPLE, IF ���� THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3) ���� DEFECTS AND REJECT ON (4) DEFECTS, THE NEW ���� ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS ���� AND REJECT THE ENTIRE LOT ON (1) DEFECT. EVEN ���� THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE ���� SAMPLE SIZE REMAINS THE SAME. ���� THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE ���� (ODS) IN THE DESIGN, MANUFACTURING, TESTING, ���� CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM ���� UNDER ANY MILITARY OR FEDERAL SPECIFICATION, ���� STANDARD OR DRAWING REFERENCED IN THIS ITEM ���� DESCRIPTION IS ""PROHIBITED"" UNLESS THE SEPARATE ���� WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS ���� OBTAINED. THIS PROHIBITION SUPERSEDES ALL ���� SPECIFICATION REQUIREMENTS BUT DOES NOT ���� ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. ���� THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS ���� DEFINED IN ""FAR 11.001"" OR TO PART-NUMBERED- ���� ONLY ITEMS. ���� MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL ���� NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT ���� CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED ���� UNDER THIS CONTRACT. ���� ..���� CRITICAL APPLICATION ITEM ���� IAW BASIC���� SPEC NR MIL-A-23595/1A(3) NOT 3 ���� REVISION NR A�� DTD 06/11/2019 ���� PART PIECE NUMBER: M23595/1-2 ���� IAW REFERENCE SPEC NR MIL-A-23595D(1) NOT 1 ���� REVISION NR D�� DTD 08/28/2019 ���� PART PIECE NUMBER: M23595/1-2 PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:GX� CLNG/DRY:1� PRESV MAT:00 ���� WRAP MAT:ZZ� CUSH/DUNN MAT:ZZ� CUSH/DUNN THKNESS:Z ���� UNIT CONT:D3� OPI:M ���� INTRMDTE CONT:DO� INTRMDTE CONT QTY:AAA ���� PACK CODE:U ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce ���� PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING ����� REQUIREMENTS FOR PROCUREMENT ZDESD: ESD and PHYSICAL protection are required for contacts, leads, terminals, ���� and other protrusions by means of container design, cushioning, and/or ���� other ESD protective devices. Components with pins or leads shall have ���� adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS ���� when not specified in the packaging codes. ���� This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or ���� Electromagnetic Interference (EMI) protective packaging materials in ���� accordance with MIL-PRF-81705. All items subject to degradation from ���� ESD/EMI environmental field forces shall be handled and packaged at an ���� approved field force protective work station. ���� For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, ���� Style 1) converted bag barrier material shall be used along with ���� MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier ���� material wrap if the contract doesn't specifically require ESD approved ���� cushioning. ���� For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, ���� Style 1) converted bag barrier material shall be used. ���� The supplier shall be responsible for verifying that all MIL-PRF-81705 ���� barrier materials (or converted bags) were supplied from a qualified ���� manufacturer currently listed on QPL-81705. ���� For additional ESD/EMI packaging information, refer to the following DLA ���� packaging website: ���� https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/ ���� If the preservation method code in the solicitation does not specify ���� ESD/EMI protection and the Offeror's proposed item of supply is subject ���� to degradation from ESD/EMI environmental field forces, Offerors shall ���� provide appropriate technical packaging data with their proposals. Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/946edbbddbec43ecafcf44bb7360ef85/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN06058598-F 20210714/210712230122 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |