SOLICITATION NOTICE
71 -- High Density Mobile Storage Shelving
- Notice Date
- 7/15/2021 10:37:51 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 337215
— Showcase, Partition, Shelving, and Locker Manufacturing
- Contracting Office
- FA3016 502 CONS CL JBSA LACKLAND TX 78236-5286 USA
- ZIP Code
- 78236-5286
- Solicitation Number
- FA301621U0148
- Response Due
- 7/22/2021 2:30:00 PM
- Archive Date
- 08/06/2021
- Point of Contact
- Dylan Shick, Phone: 2104833255, Marcus Mattingly, Phone: 2106523058
- E-Mail Address
-
dylan.shick@us.af.mil, marcus.mattingly@us.af.mil
(dylan.shick@us.af.mil, marcus.mattingly@us.af.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- 1. This is a combined synopsis/solicitation for commercial items prepared in accordance with (IAW) the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is being issued as a Request for Quotation (RFQ) No. is FA301621U0148. 2. The solicitation documents and incorporated provisions and clauses are those in effect through Federal Acquisition circular FAC 2021-06, effective 10 June 2021 and DFARS Publication Notice 20210603 effective 3 June 2021. 3. Total Small Business set-aside is applicable to this acquisition. The associated NAICS is 337215; the size standard is 500 employees. 4. See the attached Schedule of Supplies (Atch No. 3) for applicable contract line items (CLINS), description of requirement, quantities, and units of measures. 5. See the attached Statement of Work (Atch No. 2) for further information on the requirements. 6. Place of Delivery: 1100 Wilford Hall Loop Bldg 4554 Rm 0B023 JBSA Lackland, TX 78236 Delivery shall be FOB Destination. 7. The FAR provision 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition. Reference the addenda statements below to this provision. ADDENDUM to FAR 52.212-1 Addendum to FAR 52.212-1(b), Submission of offers. This paragraph is tailored as follows: To assure timely and equitable evaluation of quotations, quoters must follow the instructions contained herein. Quoters are required to meet all solicitation requirements, including all terms and conditions of the RFQ, representations and certifications, and technical requirements, in addition to those identified as evaluation factors. Failure to meet a requirement may result in a quotation being ineligible for award. Quoters must clearly identify any exceptions to the solicitation terms and conditions and provide complete accompanying rationale. The Government intends to make award based on the initial quote submissions without conducting interchanges. Therefore each quote should contain the quoter�s best terms from a price and technical standpoint. However, the Government reserves the right to hold interchanges (using Interchange Notices {INs}) if, during the evaluation, it is determined to be in the best interest of the Government, IAW FAR 52.212-1(g). Interchanges are fluid interaction(s) between the Contracting Officer (CO) and the quoters that may address any aspect of the quote and may or may not be documented in real time. Interchanges may be conducted with one, some or all quoters as the Government is not required to conduct interchanges with any and/or all quoters responding to this solicitation Quoters shall submit the following items: Price: Quoters are required to complete and return the attached Schedule of Supplies (Atch No. 3) or to provide a quote on company letterhead which must provide the following information, as listed in the Schedule of Supplies (Atch No. 3), such as Descriptions, Unit Prices and Total Prices. The Government intends to award based on initial responses, therefore, you are encouraged to offer your most advantageous pricing to include discounts, in the initial response. Technical Specifications � Quotations must be complete, self-sufficient, and respond directly to the requirements of this solicitation. The quotation shall demonstrate the contractor�s ability to provide, deliver, and install high density mobile storage shelving units, as specified in the attached Schedule of Supplies (Atch No. 3) and Statement of Work (Atch No. 2) .The quotation submittal shall be clear, concise and include sufficient detail for effective evaluation and for substantiation of the validity of stated claims. Amendments (if applicable) � vendors shall acknowledge all amendments in writing with the quotation submittal. Completed Representation and Certifications (e.g. 52.212-3/52.204-24) Addendum to 52.212-1(d), Product Samples, is deleted in its entirety. Addendum to 52.212-1(e), Multiple Offers, is deleted in its entirety. Addendum to 52.212-1(h), Multiple Awards, is deleted in its entirety. 8. The FAR provision 52.212-2, Evaluation - Commercial Items, applies to this acquisition. Reference the addenda statements below to this provision. ADDENDUM to FAR 52.212-2 If three (3) or fewer quotes are received, the Government will evaluate all quotes for technical acceptability. If more than three (3) quotes are received, the Government will then evaluate the three (3) lowest priced quotes for Technical Acceptability. However, the Government reserves the right to evaluate additional quotes for technical acceptability. If additional quotes are evaluated for technical acceptability, they will be evaluated in the order of increasing total price, when the agency determines that none of the initial three (3) lowest priced quotes are qualified as acceptable. The agency will reject and not consider for award any quote found technically unacceptable and ineligible for award under the terms of this RFQ. Best Value will be based on a Lowest Price Technically Acceptable (LPTA) approach. For this RFQ, best value means a single purchase order shall be made to the responsible contractor whose products are technically acceptable and quotes the lowest total evaluated price. The following two (2) factors shall be used to evaluate quote(s): Technical and Price. Technical - The technical response shall demonstrate compliance with providing, delivering, and installing the high density mobile storage shelving units, as specified in the attached Schedule of Supplies (Atch No. 3) and Statement of Work (Atch No. 2). The technical factor shall be rated acceptable or unacceptable as follows: Adjectival Rating Description Acceptable Quote provides sufficient information to demonstrate ability to provide, deliver, and install the required high density mobile storage shelving units, as specified in the attached Schedule of Supplies (Atch No. 3) and Statement of Work (Atch No. 2). Unacceptable Quote does not provide sufficient information to demonstrate ability to provide and deliver the required high density mobile storage shelving units, as specified in the attached Schedule of Supplies (Atch No. 3) and Statement of Work (Atch No. 2). Total Evaluated Price - Vendors will be ranked from lowest to highest based on initial assessment of total evaluated price. The Government will evaluate quotes for award purposes by adding the extended price (quantities multiplied by unit prices) for each CLIN, as identified in the Schedule of Supplies (Atch No. 3) or the supplied company quotation to determine the total evaluated price. 9. Quoter(s) is(are) required to include a completed copy of all provisions to include 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment and 52.212-3, Offeror Representations and Certifications - Commercial Items, with their quotation. 10. The FAR clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. 11. The FAR clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items, all FAR clauses cited in the clause are applicable to the acquisition. 12. Defense Priorities and Allocations System (DPAS) and assigned rating: N/A 13. The complete quotation package is due 22 July 2021 at 4:30 PM/CST. If you have any questions, please contact Dylan Shick at dylan.shick@us.af.mil or Marcus Mattingly at marcus.mattingly@us.af.mil . All questions and/or requests for information must be submitted no later than 15 July 2021 Feb 2020 at 11:30 AM/CST. 14. Site Visit: A site visit will be held at the Wilford Hall Lab located in Room 0B023 in building 4554 at 1100 Wilford Hall Loop, JBSA Lackland, Texas 78236, at 11:00 A.M. (Central) on 14 July 2021. Attendance at this site visit is recommended for this requirement but not mandatory. Contact Dylan Shick at dylan.shick@us.af.mil if you are interested in attending this site visit and provide the names of any attendees and whether or not they require a base visitors pass.� Provide this information no later than 12:00 P.M. (Central) 12 July 2021 to allow time to process base pass requests.� If no site visit attendees are received, the site visit will not be held. 15. Notice to Vendor(s): The Government reserves the right to cancel this combo/solicitation, either before or after the closing date of receipt of quotations. In the event the Government cancels this solicitation, the Government has no obligation to reimburse the vendor for any costs. 4 Attachments: Applicable Clauses and Provisions Statement of Work Schedule of Supplies AutoCAD Drawings (Informational Purposes Only)
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/328a5e699a384c5a8d1aa156ec0c181e/view)
- Place of Performance
- Address: JBSA Lackland, TX 78236, USA
- Zip Code: 78236
- Country: USA
- Zip Code: 78236
- Record
- SN06063451-F 20210717/210715230120 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |