SAMDaily.us | PRESOL | 78 | 78--ACFT Fittness equipment

SAMDAILY.US - ISSUE OF JULY 22, 2021 SAM #7173
SOLICITATION NOTICE

78 -- 78--ACFT Fittness equipment

Notice Date: 7/20/2021 5:19:35 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 339920 — Sporting and Athletic Goods Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: W56YCT060821
Response Due: 8/5/2021 8:00:00 AM
Archive Date: 02/01/2022
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W56YCT060821 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 750.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-08-05 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Ft Hood, TX 76544 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Rowing machine from either Precor/Concept 2,Precor, Lifefitness, Monark are the only acceptable brands, per Army HQDA EXORD 219-18, FRAGO 8, Annex A. The seat, handles, and rail must accommodate Soldiers height Adjustable seat for 5'0 to 6'10 heights required. It must have an odometer that accurately measures time and distance as well as level of resistance. MUST have display attached that records distance. Require displays that do not easily detach or have hanging wires. Display must be digital and be capable of displaying multiple forms of information to include distance, calories, watts, pace and time. cannot require external power source for display/function.The level of resistance must be adjustable., 20, EA; LI 002: Precor/Concept 2 Upright Bicycle Exercise Equipment x 91. Precor, Concept 2, Lifefitness, Monark are the only acceptable brands, per Army HQDA EXORD 219-18, FRAGO 8, Annex A. Cannot be foldable. Wheel housing cannot be plastic. Stationary bike with resistance and distance capabilities required. MUST have display attached that records distance. Require displays that do not easily detach or have hanging wires. Display must be digital and be capable of displaying multiple forms of information to include distance and RPM. Display must have resistance function and start/stop buttons. Bike needs to have a thick frame due to durability requirements. Bike cannot require external power source for display/function. Adjustable seat for 5'0 to 6'10 heights required. Must be durable: Magnetic rotor required. Wheel must be over 1ft wide in diameter or larger due to durability requirements. Must attach a file with bike specifications described and picture included., 20, EA; LI 003: Rower Hanger ( Length 18"", Width 3.125"" (Depth) / 2.6875"" (Inside Depth), Height 5.125"", Mounting holes 16"" on center; Laser cut 11-Gauge Steel ), 20, EA; LI 004: Assult Airbike- Heavy-Duty Steel Frame, Dimensions: 55� L x 26� W x 55� H, Hi-Contrast LCD screen with improved readability, Bluetooth and ANT connectivity, Watts � RPM -- Calories � Heart Rate -- Distance � Time � Odometer � High Intensity Interval Training Programs, Large ergonomic seat with multi-adjustment options, 4, EA; LI 005: Black steel Olympic plates cast iron weightlifting plates range from 1.25LB up to 100LB, 1, Set; LI 006: Assisted Dip/Pull-Up - Selectorized (200-pound stack and a pad on which you rest your knees while you perform either of the lifts, 11 gauge 2""x3"" steel., 1, EA; LI 007: all-in-one Posterior Chain Developer (Glute Ham Raise/Hyper Combo 80"" deep, 33-1/2"" wide, 3x3 7-gauge steel, footplate, step up platform, center gusset, Adjustable foot pad (Up, down and front, back, Linear bearing foot petal for easy adjusting. The ability Glute Ham Raises , Back Raises , Bilateral Leg Lifts , Nordic Hamstring Curl , Standing Leg Curls, Hyper Extensions), 3, EA; LI 008: PowerMax Wall Attached Ladder- And mounting brackets, 3, EA; LI 009: Peg Board Climbers (15"" x 60"") 1�� thick hardwood, and finished with a gloss polyurethane. The 15� x 60� comes with eleven (11) holes spaced on 10� centers. Holes are arranged in two rows with staggered alignment. And mounting brackets, 4, EA; LI 010: Peg Board Climbers The 30� x 30� with sixteen (16) holes spaced on 7�� centers. Holes are arranged in a 4 � 4 grid pattern. Two 1�� diameter by 6�� long wood pegs are included with each board. And mounting brackets, 4, EA; LI 011: Full bumper weights sets 25 lb, 35 lb, 45 lb, Class A Rubber, Center Opening: 50.44 mm, 450 mm, with unit logo See attachments, 4, Sets; LI 012: dumb bell set (Increments of 5 Pounds ranging from 5LB to 100 LB, Solid Steel Heads with Black Urethane Plating, Straight 6� Hardened Chrome Handle, Medium-grade knurling, Fully welded as single-piece unit, ) with storage stand, 1, Sets; LI 013: ICARIAN STRENGTH LINE FTS Glide Functional Training System or Better, 2, Ea; LI 014: Uesaka USA or better Training platform with unit logo � 3 m x 3 m Available as special order � Tile System: 2 stage durometer hardness � Durometer:� Special blended rubber formula for top surface hardness of 78 and bottom surface shock absorption of 50. � Attachment System: Interlocking � Transition Edging: ADA Compliant Transition Ramp System � Special formulated interlocking rubber tiles with non-skid top surface, 2, EA; LI 015: Uesaka USA or better COMPETITION PLATFORMS IWF certified for use at international weightlifting competitions � Special Japanese Hardwood Individual planks/beams � 400 cm on each side � Individual fastening system for each plank/beam with steel rod attachments � Plank Dimensions:� 10 cm height, 1, EA; LI 016: ROGUE COMBO RACK or better Made in the USA with US steel Squat/Bench Combination Rack IPF Competition Certified Footprint (w/ bench): 77.25"" x 80.25"" Inside Width: 43.5� Total Weight (including bench): 505LB 3x3� 7-gauge steel construction Jack - Lever Arms for height adjustment (2) Adjustable Uprights with laser-cut numbering & MG Black powdercoat finish (4) Machined Pins (4) J-Cups (2) Steel Safety Spotter Arms - 19.5"" x 3"" (1) Bench w/ Fat Pad and Spotter Decks Rubber Feet and UHMW Plastic to protect equipment and surface, 2, EA; LI 017: Rogue DB-10 Loadable Dumbbell w/ Rogue OSO Collars or Better, 4, EA; LI 018: Rogue DB 15 Loadable Dumbbell w/ Rogue OSO Collars or Better, 4, EA; LI 019: ROGUE DUMBBELL BUMPERS or Better ( Set Consist of (2) pair of 10LB, 15LB, 25LB, 35LB, 45LB, 55LB), 8, Sets; LI 020: ALB3x Lower Body Ascent Trainer or better, 1, EA; LI 021: 90 days after receipt of order (ARO) for delivery of Lines #14 and line # 11 all others requesting 60 Days after receipt of order (ARO) for delivery, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/4162881eb0d54b74b8bd0ebb8a7759fc/view)
Place of Performance: Address: Bldg 37014 bulldog RD , Ft Hood, TX 76544, USA; Zip Code: 76544; Country: USA
Record: SN06067679-F 20210722/210720230125 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

78 -- 78--ACFT Fittness equipment