SOLICITATION NOTICE
44 -- Dust Collector
- Notice Date
- 7/28/2021 1:40:25 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333413
— Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing
- Contracting Office
- DLA MARITIME - NORFOLK PORTSMOUTH VA 23709-5000 USA
- ZIP Code
- 23709-5000
- Solicitation Number
- SPMYM121Q0088
- Response Due
- 8/4/2021 1:00:00 PM
- Archive Date
- 08/19/2021
- Point of Contact
- Craig Harmon, Phone: 7572785055
- E-Mail Address
-
craig.harmon@dla.mil
(craig.harmon@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 333413 Industrial and Commercial Fan and Blower and Air Purification Equipment. This requirement will be set aside as a 100% Small Business concern. The Contract Line Items (CLINs) are as follows. 0001 1 Each N4215811600167 FFP DUST COLLECTOR 1. SPECIFICATIONS: 1.1. SCOPE: Procurement for one each (1 ea) Dust Collector for Norfolk Naval Shipyard Cold Spray Section. 2. EQUIPMENT DESCRIPTION: The equipment shall consist of one each Dust Collector. 2.1. SALIENT CHARCTERISTICS: Dust Collector shall have the following salient characteristics (minimum). 2.1.1. Design/ Construction: 2.1.1.1. Machine shall be equipped with reinforced housing construction. 2.1.1.2. Machine shall be equipped with low-inlet drop-out box. 2.1.1.3. Machine shall be equipped with inline spark cooler. 2.1.1.4. Machine shall be equipped with composite-style explosion relief panels. 2.1.1.5. Machine shall be equipped with fire and explosion suppression. 2.1.1.6. Machine shall be equipped with heat sensors. 2.1.1.7. Machine shall be equipped with alarm strobes. 2.1.1.8. Machine shall be equipped with downward airflow advantage. 2.1.1.9. Machine shall be equipped with easy filter access. 2.1.1.10. Machine shall be equipped with access door with T-handle compression latches. 2.1.1.11. Machine shall be equipped with filter cradles with rotary filter locks. 2.1.1.12. Machine shall be equipped with zero-turn power pulse cleaning system. 2.1.1.13. Machine shall be equipped with sprinkler couplings. 2.1.1.14. Machine shall be equipped with built-in exhaust silencer. 2.1.1.15. Machine shall be equipped with built-in damper valve. 2.1.1.16. Machine shall be equipped with top exhaust outlet with weather hood. 2.1.1.17. Machine shall be equipped with a standard top with an inlet diameter of 12"". 2.1.1.18. Machine shall be equipped with explosion venting. 2.1.1.19. Machine shall be equipped with 17 gallon dust container hopper discharge. 2.1.1.20. Machine shall be equipped with Powercore Ultra-Web FR filter packs or equivalent. 2.1.1.21. Machine shall be equipped with a N EMA 4, 5 HP electrical control panel with shutdown for electrically powered equipment. 2.1.1.22. Machine shall be equipped with NEMA premium, 5 HP aluminum wheel integrated power packs. 2.1.1.23. Machine shall be received fully assembled and pre-wired. 2.1.1.24. Machine shall be built to NFPA 79 to accept 480 VAC, 3 phase, 60 Hz. 2.1.2. Flameless Venting: 2.1.2.1. Shall be located on the side of the machine. 2.1.2.2. Shall be outdoor duty. 2.1.2.3. Shall be equipped with a burst indicator. 2.1.2.4. Shall be capable of 5 psi pressure reading of the vessel. 2.1.3. Operating Conditions: 2.1.3.1. Power: 7.5 HP 2.1.3.2. STD Housing Rating: 12"" 2.1.3.3. 2.1.3.4. 2.1.3.5. Reinforced Housing Rating: 2.1 psi Wind Load Rating: 90 mph Compressed Air Required: 90-100 psi 2.1.3.6. Operating Temperature: 150 �F 2.1.4. Capacity: 2.1.4.1. Nominal Airflow Range: 2000 - 4800 cfm 2.1.4.2. No. of Filter Packs: 4 2.1.4.3. Filter Area: 588 ft2 2.1.4.4. 2.1.4.5. No. of Valves: 4 Dimensions: 82"" L x 47"" W x 86"" H 3. TECHNICAL MANUALS: Three (3) complete sets of technical manuals covering operation, service and maintenance, and part-listing shall be provided. 4. QUALITY ASSURANCE PROVISIONS: Inspection and acceptance of the supplies, performed at destination by Code 983 and shall consist of type and kind; condition; operability, if readily determinable; preservation; packaging. 5. PRESERVATION, PACKAGING AND PACKING: The equipment shall be packaged, packed and preserved for shipment to reach ultimate destination undamaged. Package shall be prominently marked ""NOT FOR OUTSIDE STORAGE"". Yellow packaging, packing, preservation and marking are prohibited. 6. ADDITIONAL REQUIREMENTS: 6.1. Additional Accessories: 6.1.1. lsoflap: 6.1.1.1. Shall be 12"" in size. 6.1.1.2. Shall include module and cables. 6.1.1.3. Shall be designed with inlet duct mechanical isolation. 6.2. Machine Hardware: Machine shall include any necessary lifting, leveling, and floor attachment hardware for machine installation. 6.3. Nameplate: A nameplate shall be permanently and securely attached to each machine, the information provided on the plate shall be as listed below. a) Nomenclature b) Manufacturer's name c) Manufacturer's model designation d) Manufacturer's serial number e) Power input (volts, total amps, phase, frequency) f) Amp rating of largest motor g) Short circuit/over-current protection rating SPMYM121Q0088 Page 6 of 45 h) Contract Number or Order Number i) National Stock Number or Plant Equipment Code j) Date of manufacture 6.4. Operating and Maintenance Manual: Machine shall be provided with operating and Maintenance Manual (O&M), Electrical Manual, Mechanical Manual & Schematics three (3) each shall be provided with the machine and one (1) each searchable electronic copy (PDF) shall be E-mailed TPOC. 6.5. Verification Test: After delivery the contractor shall test run each machine at the site to ensure conformance with this purchase description. 6.6. Warranty: This machine shall be warranted against any defects in material, parts, and workmanship for 12 months after the date of installation. 7. TECHNICAL POINT OF CONTACT: Russell Harris Ph: 757-636-4908 Email: russell.r.harris@navy.mil NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent. FOB: Destination MILSTRIP: N4215811600167 PURCHASE REQUEST NUMBER: N4215811600167 PROJECT: YY9 PSC CD: 44603 This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM121Q0088 and it is expected to be posted on or about 27 July 2021 and posted in SAM, https://.sam.gov/. Quotes will be due by 4:00 pm EST on 04 August, 2021 and may be emailed to the attention of Craig Harmon at craig.harmon@dla.mil. Please make sure that the solicitation number (SPMYM121Q0088) is included in the subject line of any email correspondence.� Emails without subject lines will not be read because of security issues. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://.sam.gov/ By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/61cfb47562de404c9a7f8a9e68291b7c/view)
- Place of Performance
- Address: Portsmouth, VA 23709, USA
- Zip Code: 23709
- Country: USA
- Zip Code: 23709
- Record
- SN06076720-F 20210730/210728230111 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |