SAMDaily.us | PRESOL | 23 | 23--Tools

SAMDAILY.US - ISSUE OF JULY 31, 2021 SAM #7182
SOLICITATION NOTICE

23 -- 23--Tools

Notice Date: 7/29/2021 9:20:49 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 332216 — Saw Blade and Handtool Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: FBTX1STSFCBAL0002
Response Due: 8/20/2021 9:30:00 AM
Archive Date: 02/16/2022
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FBTX1STSFCBAL0002 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 332216 with a small business size standard of 750.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-08-20 12:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Bliss, TX 79916 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: 8-DRW 34 INCH WRKSTN, 10, ea; LI 002: 5-DRW TOP CHEST FOR 8-DRW 34 INCH WRKSTN, 10, ea; LI 003: 25-INCH SHORT SIDE BOX, 10, ea; LI 004: CUSTOM FOAM SQ INCH 10,028 SQ IN PER SET, 10, ea; LI 005: 1/4 drive, 5/16 DEEP SOCKET 6PT, 10, ea; LI 006: 1/4 drive, 11/32 DEEP SOCKET 6PT, 10, ea; LI 007: 1/4 drive, 3/8 DEEP SOCKET 6PT, 10, ea; LI 008: 1/4 drive, 7/16 DEEP SOCKET 6PT, 10, ea; LI 009: 1/4 drive, 1/2 DEEP SOCKET 6PT, 10, ea; LI 010: 1/4 drive, 9/16 DEEP SOCKET 6PT, 10, ea; LI 011: 1/4 drive, 3/16 DEEP SOCKET 6 PT, 10, ea; LI 012: 1/4 drive, 7/32 DEEP SOCKET 6 PT, 10, ea; LI 013: 1/4 drive, 1/4 DEEP SOCKET 6 PT, 10, ea; LI 014: 1/4 drive, 1/4DR DP SKT 9/32 6PT, 10, ea; LI 015: 1/4 drive, 10MM DEEP SOCKET 6PT, 10, ea; LI 016: 1/4 drive, 11MM DEEP SOCKET 6PT, 10, ea; LI 017: 1/4 drive, 12MM DEEP SOCKET 6PT, 10, ea; LI 018: 1/4 drive, 13MM DEEP SOCKET 6PT, 10, ea; LI 019: 1/4 drive, 14MM DEEP SOCKET 6PT, 10, ea; LI 020: 1/4 drive, 15MM DEEP SOCKET 6PT, 10, ea; LI 021: 1/4 drive, 5MM DEEP SOCKET 6PT, 10, ea; LI 022: 1/4 drive, 5.5MM DEEP SOCKET 6PT, 10, ea; LI 023: 1/4 drive, 6MM DEEP SOCKET 6PT, 10, ea; LI 024: 1/4 drive, 7MM DEEP SOCKET 6PT, 10, ea; LI 025: 1/4 drive, 8MM DEEP SOCKET 6PT, 10, ea; LI 026: 1/4 drive, 9MM DEEP SOCKET 6PT, 10, ea; LI 027: 1/4 drive, 10MM STANDARD SOCKET 6PT, 10, ea; LI 028: 1/4 drive, 11MM STANDARD SOCKET 6PT, 10, ea; LI 029: 1/4 drive, 12MM STANDARD SOCKET 6PT, 10, ea; LI 030: 1/4 drive, 13MM STANDARD SOCKET 6PT, 10, ea; LI 031: 1/4 drive, 14MM STANDARD SOCKET 6PT, 10, ea; LI 032: 1/4 drive, 15MM STANDARD SOCKET 6PT, 10, ea; LI 033: 1/4 drive, 5MM STANDARD SOCKET 6 PT, 10, ea; LI 034: 1/4 drive, 5MM STANDARD SOCKET 6 PT, 10, ea; LI 035: 1/4 drive, 6MM STANDARD SOCKET 6PT, 10, ea; LI 036: 1/4 drive, 7MM STANDARD SOCKET 6PT, 10, ea; LI 037: 1/4 drive, 8MM STANDARD SOCKET 6PT, 10, ea; LI 038: 1/4 drive, 9MM STANDARD SOCKET 6PT, 10, ea; LI 039: 1/4""DRIVE5""METALHANDLE, 10, ea; LI 040: 1/4 drive, 5/16 STANDARD SOCKET - 6PT, 10, ea; LI 041: 1/4 drive, 11/32 STANDARD SOCKET - 6PT, 10, ea; LI 042: 1/4 drive, 3/8 STANDARD SOCKET - 6PT, 10, ea; LI 043: 1/4 drive, 7/16 STANDARD SOCKET - 6PT, 10, ea; LI 044: 1/4 drive, 1/2 STANDARD SOCKET - 6PT, 10, ea; LI 045: 1/4 drive, 9/16 STANDARD SOCKET - 6PT, 10, ea; LI 046: 1/4 drive, 3/16 STANDARD SOCKET - 6PT, 10, ea; LI 047: 1/4 drive, 7/32 STANDARD SOCKET - 6PT, 10, ea; LI 048: 1/4 drive, 1/4 STANDARD SOCKET - 6PT, 10, ea; LI 049: 1/4 drive, 9/32 STANDARD SOCKET - 6PT, 10, ea; LI 050: 1/4 DR UNIVERSAL JOINT, 10, ea; LI 051: 2"" KNURLED EXTENSION -1/4"" DR, 10, ea; LI 052: 4"" KNURLED EXTENSION-1/4"" DR, 10, ea; LI 053: BATTERY PLIERS, 10, ea; LI 054: BATTERY POST & CABLE CLEANER, 10, ea; LI 055: BATTERY BRUSH, 10, ea; LI 056: 5/16 SIDE TERM. RATCHET-SHORT, 10, ea; LI 057: 3/8 drive, 7/16 UNIVERSAL SOCKET 6PT, 10, ea; LI 058: 3/8 drive, 1/2 UNIVERSAL SOCKET 6PT, 10, ea; LI 059: 3/8 drive, 9/16 UNIVERSAL SOCKET 6PT, 10, ea; LI 060: 3/8 drive, 5/8 UNIVERSAL SOCKET 6PT, 10, ea; LI 061: 3/8 drive, 11/16 UNIVERSAL SOCKET 6PT, 10, ea; LI 062: 3/4 UNIVERSAL SOCKET 6PT, 10, ea; LI 063: 3/8""-1/2"" ADAPTER, 10, ea; LI 064: 3/8 drive, UNIVERSAL JOINT, 10, ea; LI 065: 3/8 drive, 1"" EXTENSION, 10, ea; LI 066: 3/8 drive, 3"" KNURLED EXTENSION, 10, ea; LI 067: 3/8 drive, 6"" KNURLED EXTENSION, 10, ea; LI 068: 3/8""-1/4"" IMPACT ADAPTER, 10, ea; LI 069: 3/8 drive, 10MM METRIC UNIV SOCKET 6PT, 10, ea; LI 070: 3/8 drive, 12MM METRIC UNIV SOCKET 6PT, 10, ea; LI 071: 3/8 drive, 13MM METRIC UNIV SOCKET 6PT, 10, ea; LI 072: 3/8 drive, 14MM METRIC UNIV SOCKET 6PT, 10, ea; LI 073: 3/8 drive, 15MM METRIC UNIV SOCKET 6PT, 10, ea; LI 074: 3/8 drive, 17MM METRIC UNIV SOCKET 6PT, 10, ea; LI 075: 3/8 drive, 10MM HEX DRIVER, 10, ea; LI 076: 3/8 drive, 4MM HEX HEAD SOCKET DRIVER, 10, ea; LI 077: 3/8 drive, 5MM HEX HEAD SOCKET DRIVER, 10, ea; LI 078: 3/8 drive, 6MM HEX HEAD SOCKET DRIVER, 10, ea; LI 079: 3/8 drive, 7MM HEX HEAD SOCKET DRIVER, 10, ea; LI 080: 3/8 drive, 8MM HEX HEAD SOCKET DRIVER, 10, ea; LI 081: 3/8 drive, 9MM HEX HEAD SOCKET DRIVER, 10, ea; LI 082: 3/8 drive, 3/8 FLARE NUT CROWFOOT, 10, ea; LI 083: 3/8 drive, 7/16 FLARE NUT CROWFOOT, 10, ea; LI 084: 3/8 drive, 1/2 FLARE NUT CROWFOOT, 10, ea; LI 085: 3/8 drive, 9/16 FLARE NUT CROWFOOT, 10, ea; LI 086: 3/8 drive, 5/8 FLARE NUT CROWFOOT, 10, ea; LI 087: 3/8 drive, 11/16 FLARE NUT CROWFOOT, 10, ea; LI 088: 3/8 drive, 3/4 FLARE NUT CROWFOOT, 10, ea; LI 089: 5/16 HEX HEAD SCREWDRIVER, 10, ea; LI 090: 3/8 HEX HEAD SCREWDRIVER, 10, ea; LI 091: 1/8 HEX HEAD DRIVERS, 10, ea; LI 092: 5/32 HEX HEAD SCREWDRIVER, 10, ea; LI 093: 3/16 HEX HEAD SCREWDRIVER, 10, ea; LI 094: 7/32 HEX HEAD SCREWDRIVER, 10, ea; LI 095: 1/4 HEX HEAD SCREWDRIVER, 10, ea; LI 096: 3/8 drive, 10MM FLEX CROWFOOT SOCKET, 10, ea; LI 097: 11MM OE CROWFOOT 3/8 DR, 10, ea; LI 098: 12MM OE CROWFOOT 3/8 DR, 10, ea; LI 099: 13MM OE CROWFOOT 3/8 DR, 10, ea; LI 100: 3/8 drive, 14MM FLEX CROWFOOT SOCKET, 10, ea; LI 101: 15MM OE CROWFOOT 3/8 DR, 10, ea; LI 102: 16MM OE CROWFOOT 3/8 DR, 10, ea; LI 103: 3/8 drive, 17MM FLEX CROWFOOT SOCKET, 10, ea; LI 104: 3/8 drive, 18MM FLEX CROWFOOT SOCKET, 10, ea; LI 105: 3/8 drive, 19MM OE CROWFOOT 3/8 DR, 10, ea; LI 106: 3/8DR 1/4 SHORT 6PT SKT, 10, ea; LI 107: 3/8DR 5/16 SHORT 6PT SKT, 10, ea; LI 108: 3/8DR 3/8 SHORT 6PT SKT, 10, ea; LI 109: 3/8DR 7/16 SHORT 6PT SKT, 10, ea; LI 110: 3/8DR 1/2 SHORT 6PT SKT, 10, ea; LI 111: 3/8DR 9/16 SHORT 6PT SKT, 10, ea; LI 112: 3/8DR 5/8 SHORT 6PT SKT, 10, ea; LI 113: 3/8DR 11/16 SHORT 6PT SKT, 10, ea; LI 114: 3/8DR 3/4 SHORT 6PT SKT, 10, ea; LI 115: 3/8DR 3/16 SHORT 6PT SKT, 10, ea; LI 116: 3/8 drive, 1/4 DEEP SOCKET 6PT, 10, ea; LI 117: 3/8 drive, 5/16 DEEP SOCKET 6PT, 10, ea; LI 118: 3/8 drive, 3/8 DEEP SOCKET 6PT, 10, ea; LI 119: 3/8 drive, 7/16 DEEP SOCKET 6PT, 10, ea; LI 120: 3/8 drive, 1/2 DEEP SOCKET 6PT, 10, ea; LI 121: 3/8 drive, 9/16 DEEP SOCKET 6PT, 10, ea; LI 122: 3/8 drive, 5/8 DEEP SOCKET 6PT, 10, ea; LI 123: 3/8 drive, 11/16 DEEP SOCKET 6PT, 10, ea; LI 124: 3/8 drive, 3/4 DEEP SOCKET 6PT, 10, ea; LI 125: 3/8 drive, 13/16 DEEP SOCKET 6PT, 10, ea; LI 126: 3/8 drive, 7/8 DEEP SOCKET 6PT, 10, ea; LI 127: T27 TORX DRIVER, 1/4"" DR., 10, ea; LI 128: T30 TORX DRIVER, 3/8"" DR., 10, ea; LI 129: T40 TORX DRIVER, 3/8"" DR., 10, ea; LI 130: T45 TORX DRIVER, 3/8"" DR., 10, ea; LI 131: T47 TORX DRIVER, 3/8"" DR., 10, ea; LI 132: T50 TORX DRIVER, 3/8"" DR., 10, ea; LI 133: T55 TORX DRIVER, 3/8"" DR., 10, ea; LI 134: T10 TORX DRIVER, 1/4"" DR., 10, ea; LI 135: T15 TORX DRIVER, 1/4"" DR., 10, ea; LI 136: T20 TORX DRIVER, 1/4"" DR., 10, ea; LI 137: T25 TORX DRIVER, 1/4"" DR., 10, ea; LI 138: T8 TORX DRIVER, 1/4"" DR., 10, ea; LI 139: 3/8 drive, 10MM SOCKET 6 PT, 10, ea; LI 140: 3/8 drive, 11MM SOCKET 6 PT, 10, ea; LI 141: 3/8 drive, 12MM SOCKET 6 PT, 10, ea; LI 142: 3/8 drive, 13MM SOCKET 6 PT, 10, ea; LI 143: 3/8 drive, 14MM SOCKET 6 PT, 10, ea; LI 144: 3/8 drive, 15MM SOCKET 6 PT, 10, ea; LI 145: 3/8 drive, 16MM SOCKET 6 PT, 10, ea; LI 146: 3/8 drive, 17MM SOCKET 6 PT, 10, ea; LI 147: 3/8 drive, 18MM SOCKET 6 PT, 10, ea; LI 148: 3/8 drive, 19MM SOCKET 6 PT, 10, ea; LI 149: 3/8 drive, 8MM SOCKET 6 PT, 10, ea; LI 150: 3/8 drive, 9MM SOCKET 6 PT, 10, ea; LI 151: 3/8 drive, 10MM METRIC DEEP SOCKET 6PT, 10, ea; LI 152: 3/8 drive, 11MM METRIC DEEP SOCKET 6PT, 10, ea; LI 153: 3/8 drive, 12MM METRIC DEEP SOCKET 6PT, 10, ea; LI 154: 3/8 drive, 13MM METRIC DEEP SOCKET 6PT, 10, ea; LI 155: 3/8 drive, 14MM METRIC DEEP SOCKET 6PT, 10, ea; LI 156: 3/8 drive, 15MM METRIC DEEP SOCKET 6PT, 10, ea; LI 157: 3/8 drive, 16MM METRIC DEEP SOCKET 6PT, 10, ea; LI 158: 3/8 drive, 17MM METRIC DEEP SOCKET 6PT, 10, ea; LI 159: 3/8 drive, 18MM METRIC DEEP SOCKET 6PT, 10, ea; LI 160: 3/8 drive, 19MM METRIC DEEP SOCKET 6PT, 10, ea; LI 161: 3/8 drive, 8MM METRIC DEEP SOCKET 6PT, 10, ea; LI 162: 3/8 drive, 9MM METRIC DEEP SOCKET 6PT, 10, ea; LI 163: 1/2 drive, 1/2 DEEP IMPACT SOCKET 6PT, 10, ea; LI 164: 1/2 drive, 9/16 DEEP IMPACT SOCKET 6PT, 10, ea; LI 165: 1/2 drive, 5/8 DEEP IMPACT SOCKET 6PT, 10, ea; LI 166: 1/2 drive, 11/16 DEEP IMPACT SOCKET 6PT, 10, ea; LI 167: 1/2 drive, 3/4 DEEP IMPACT SOCKET 6 PT, 10, ea; LI 168: 1/2 drive, 13/16 DEEP IMPACT SOCKET 6 PT, 10, ea; LI 169: 1/2 drive, 7/8 DEEP IMPACT SOCKET 6 PT, 10, ea; LI 170: 1/2 drive, 15/16 DEEP IMPACT SOCKET 6 PT, 10, ea; LI 171: 1/2 drive, 1"" DEEP IMPACT SOCKET 6 PT, 10, ea; LI 172: 3/8 drive, 10MM IMPACT SOCKET 12PT, 10, ea; LI 173: 3/8 drive, 11MM IMPACT SOCKET 12PT, 10, ea; LI 174: 3/8 drive, 12MM IMPACT SOCKET 12PT, 10, ea; LI 175: 3/8 drive, 13MM IMPACT SOCKET 12PT, 10, ea; LI 176: 3/8 drive, 14MM IMPACT SOCKET 12PT, 10, ea; LI 177: 3/8 drive, 15MM IMPACT SOCKET 12PT, 10, ea; LI 178: 3/8 drive, 16MM IMPACT SOCKET 12PT, 10, ea; LI 179: 3/8 drive, 17MM IMPACT SOCKET 12PT, 10, ea; LI 180: 3/8 drive, 18MM IMPACT SOCKET 12PT, 10, ea; LI 181: 3/8 drive, 19MM IMPACT SOCKET 12PT, 10, ea; LI 182: 3/8 drive, 10MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 183: 3/8 drive, 11MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 184: 3/8 drive, 12MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 185: 3/8 drive, 13MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 186: 3/8 drive, 14MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 187: 3/8 drive, 15MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 188: 3/8 drive, 16MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 189: 3/8 drive, 17MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 190: 3/8 drive, 18MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 191: 3/8 drive, 19MM DEEP IMPACT SOCKET 6PT, 10, ea; LI 192: 1/2 drive, 3/8 IMPACT SOCKET, 10, ea; LI 193: 1/2 drive, 7/16 IMPACT SOCKET, 10, ea; LI 194: 1/2 drive, 1/2 IMPACT SOCKET, 10, ea; LI 195: 1/2 drive, 9/16 IMPACT SOCKET, 10, ea; LI 196: 1/2 drive, 5/8 IMPACT SOCKET, 10, ea; LI 197: 1/2 drive, 11/16 IMPACT SOCKET, 10, ea; LI 198: 1/2 drive, 3/4 IMPACT SOCKET 6PT, 10, ea; LI 199: 1/2 drive, 13/16 IMPACT SOCKET 6PT, 10, ea; LI 200: 1/2 drive, 7/8 IMPACT SOCKET 6PT, 10, ea; LI 201: 1/2 drive, 15/16 IMPACT SOCKET 6PT, 10, ea; LI 202: 1/2 drive, 1"" IMPACT SOCKET 6PT, 10, ea; LI 203: 1/2 drive, 7/16 DEEP SOCKET 6PT, 10, ea; LI 204: 1/2 drive, 1/2 DEEP SOCKET 6PT, 10, ea; LI 205: 1/2 drive, 9/16 DEEP SOCKET 6PT, 10, ea; LI 206: 1/2 drive, 5/8 DEEP SOCKET 6PT, 10, ea; LI 207: 1/2 drive, 11/16 DEEP SOCKET 6PT, 10, ea; LI 208: 1/2 drive, 3/4 DEEP SOCKET 6PT, 10, ea; LI 209: 1/2 drive, 13/16 DEEP SOCKET 6PT, 10, ea; LI 210: 1/2 drive, 7/8 DEEP SOCKET 6PT, 10, ea; LI 211: 1/2 drive, 15/16 DEEP SOCKET 6PT, 10, ea; LI 212: 1/2 drive, 1"" DEEP SOCKET 6PT, 10, ea; LI 213: 1/2 drive, 1-1/16 DEEP SOCKET 6PT, 10, ea; LI 214: 1/2 drive, 1-1/8 DEEP SOCKET 6PT, 10, ea; LI 215: 1/2 drive, 12MM SOCKET 6PT, 10, ea; LI 216: 1/2 drive, 13MM SOCKET 6PT, 10, ea; LI 217: 1/2 drive, 14MM SOCKET 6PT, 10, ea; LI 218: 1/2 drive, 15MM SOCKET 6PT, 10, ea; LI 219: 1/2 drive, 16MM SOCKET 6PT, 10, ea; LI 220: 1/2 drive, 17MM SOCKET 6PT, 10, ea; LI 221: 1/2 drive, 18MM SOCKET 6PT, 10, ea; LI 222: 1/2 drive, 19MM SOCKET 6PT, 10, ea; LI 223: 1/2 drive, 20MM SOCKET 6PT, 10, ea; LI 224: 1/2 drive, 21MM SOCKET 6PT, 10, ea; LI 225: 1/2 drive, 22MM SOCKET 6PT, 10, ea; LI 226: 1/2 drive, 23MM SOCKET 6PT, 10, ea; LI 227: 1/2 drive, 24MM SOCKET 6PT, 10, ea; LI 228: 1/2""DRIVE11""METALHANDLE, 10, ea; LI 229: 1/2"" DR. 18"" FLEX HANDLE, 10, ea; LI 230: 1/2 drive, 10"" EXTENSION, 10, ea; LI 231: 1/2 drive, 5"" EXTENSION, 10, ea; LI 232: 1/2 drive, 3/8 SOCKET 6PT, 10, ea; LI 233: 1/2 drive, 7/16 SOCKET 6PT, 10, ea; LI 234: 1/2 drive, 1/2 SOCKET 6PT, 10, ea; LI 235: 1/2 drive, 9/16 SOCKET 6PT, 10, ea; LI 236: 1/2 drive, 5/8 SOCKET 6PT, 10, ea; LI 237: 1/2 drive, 11/16 SOCKET 6PT, 10, ea; LI 238: 1/2 drive, 3/4 SOCKET 6PT, 10, ea; LI 239: 1/2 drive, 13/16 SOCKET 6PT, 10, ea; LI 240: 1/2 drive, 7/8 SOCKET 6PT, 10, ea; LI 241: 1/2 drive, 15/16 SOCKET 6PT, 10, ea; LI 242: 1/2 drive, 1"" SOCKET 6PT, 10, ea; LI 243: 1/2 drive, 1-1/16"" SOCKET 6PT, 10, ea; LI 244: 1/2 drive, 1-1/8"" SOCKET 6PT, 10, ea; LI 245: WIRE BRUSH 14, 10, ea; LI 246: QUIET MUFF QM-24 PLUS, 10, ea; LI 247: IMPACT UNIVERSAL JOINT, 10, ea; LI 248: BLOW GUN, 10, ea; LI 249: 6MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 250: 7MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 251: 8MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 252: 9MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 253: 1/2"" AIR IMPACT WRENCH, 10, ea; LI 254: 1/2 50-250 FTLB TORQUE WRENCH, 10, ea; LI 255: 1/2"" UNIVERSAL JOINT, 10, ea; LI 256: 1/2""DRIVE18""METALHANDLE, 10, ea; LI 257: 25 CURVED CAPPED PRY BAR ORG, 10, ea; LI 258: 1/2 drive, 3"" EXTENSION, 10, ea; LI 259: 1/4""DRIVE6""METALHANDLEFLEX, 10, ea; LI 260: 1/4"" DR. 14"" KNURLED EXTENSION, 10, ea; LI 261: 1/2X12"" LADY FOOT PRY BAR, 10, ea; LI 262: 7""HIGH LEVERAGE DIAG CUTTERS, 10, ea; LI 263: 8"" LONG REACH FLATNOSE PLIERS, 10, ea; LI 264: 16IN TONGUE AND GROOVE PLIERS, 10, ea; LI 265: 24OZ AV BALL PEEN HAMMER, 10, ea; LI 266: MASTER BOLT GRIP SET, 10, ea; LI 267: 1/2"" CARBON SCRAPER, 10, ea; LI 268: 20 PC. SCREW EXTRACTOR SET, 10, ea; LI 269: WR ADJUSTABLE 8, 10, ea; LI 270: 3/8 DR 13IN MTL HDL RTCHT, 10, ea; LI 271: 24"" KNURLED EXTENSION, 10, ea; LI 272: 3"" KNURLED EXTENSION, 10, ea; LI 273: 8"" KNURLED EXTENSION, 10, ea; LI 274: 32 OZ DEADBLOW SHORT BP COMP, 10, ea; LI 275: 28OZ SLIM/DEADBLOW HAMMER, 10, ea; LI 276: HD Creeper w/3"" Wheels, 10, ea; LI 277: 7IN CURVED JAW W/ CUTTER, 10, ea; LI 278: 1/4"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 279: KS2 COMBO WR 5/16IN/12PT, 10, ea; LI 280: KS2 COMBO WR 1-1/16IN/12PT, 10, ea; LI 281: KS2 COMBO WR 1-1/8IN/12PT, 10, ea; LI 282: KS2 COMBO WR 1-1/4IN/12PT, 10, ea; LI 283: KS2 METRIC COMBO WR 20MM/12PT, 10, ea; LI 284: KS2 METRIC COMBO WR 21MM/12PT, 10, ea; LI 285: KS2 METRIC COMBO WR 22MM/12PT, 10, ea; LI 286: 12"" BRASS DRIFT PUNCH, 10, ea; LI 287: 1/8"" SUPER STEEL PIN PUNCH, 10, ea; LI 288: 1/4"" SUPER STEEL PIN PUNCH, 10, ea; LI 289: 1/8"" S/S STARTER PUNCH, 10, ea; LI 290: 1/4"" S/S STARTER PUNCH, 10, ea; LI 291: SUPER ST CENTER PUNCH 1/4""HEX, 10, ea; LI 292: PUNCH & CHISEL HOLDER, 10, ea; LI 293: COTTER KEY PULLER, 10, ea; LI 294: 1/2IN DRIVE BREAKER BAR 24IN, 10, ea; LI 295: 17 CURVED CAPPED PRY BAR ORG, 10, ea; LI 296: CROSS POINT SCREW STARTER, 10, ea; LI 297: 2"" EXTENSION, 10, ea; LI 298: 1/4""-3/8"" ADAPTER, 10, ea; LI 299: 41-PC MAC SAE TAP/DIE SET, 10, ea; LI 300: 41-PC MAC METRIC TAP/DIE SET, 10, ea; LI 301: COMBO FLARING TOOL KIT, 10, ea; LI 302: 1/4"" DR FLEX EXTENSION, 10, ea; LI 303: 1/4"" DR 1"" KNURLED EXT, 10, ea; LI 304: 1/4"" DR. 10"" KNURLED EXTENSION, 10, ea; LI 305: KNIFE BIMETAL RET CG, 10, ea; LI 306: 5/8X16"" LADY FOOT PRY BAR, 10, ea; LI 307: 9-1/2"" MULTI PURPOSE PLIERS, 10, ea; LI 308: 8"" NEEDLE NOSE PLIERS W/CUTTER, 10, ea; LI 309: HAND SCRATCH BRUSH-WOOD, 10, ea; LI 310: SET 15 HEX L-WRENCH .028-3/8"", 10, ea; LI 311: 15PC MET SHRT-ARM HEX KEY SET, 10, ea; LI 312: 16OZ AV BALL PEEN HAMMER, 10, ea; LI 313: 1.5"" STRIKABLE SCRAPER, 10, ea; LI 314: 6/12V CIRCUIT TESTER, 10, ea; LI 315: STEALTH OTG GOGGLE - CLEAR, 10, ea; LI 316: 3/8 DR 9IN CMFT HDL RTCHT, 10, ea; LI 317: WR ADJUSTABLE 12, 10, ea; LI 318: COMB GAUGE SET, 10, ea; LI 319: 22 BL. MASTER GO-NO-GO GAUGE, 10, ea; LI 320: 25BLD UNIV MSTR FEELER GAGE ST, 10, ea; LI 321: SPARK PLUG GAUGE & GAPPER, 10, ea; LI 322: 3/8""DR 13"" METAL LOCKING FLEX, 10, ea; LI 323: 12"" KNURLED EXTENSION, 10, ea; LI 324: 2-1/4 INSPECTION MIRROR, 10, ea; LI 325: GOGGLES, 10, ea; LI 326: 1/2""-3/8"" 2 PC. IMPACT ADAPTER, 10, ea; LI 327: FACE MALLET 50MM, 10, ea; LI 328: COMPACT HACKSAW, 10, ea; LI 329: 10IN CURVED JAW W/ CUTTER, 10, ea; LI 330: 2-D CELL FLASHLIGHT, 10, ea; LI 331: KS2 COMBO WR 15/16IN/12PT, 10, ea; LI 332: KS2 COMBO WR 1IN/12PT, 10, ea; LI 333: 1.3"" STAINLESS STL PUTTY KNIFE, 10, ea; LI 334: MED INT/EXT RET RING PLIERS, 10, ea; LI 335: POWERCAP PICKUP 1.5/2LB, 10, ea; LI 336: 4-N-1 STRIPPER/CUTTER 16-30AWG, 10, ea; LI 337: 13/16"" SPARK PLUG SOCKET, 10, ea; LI 338: 5/8"" SPARK PLUG SOCKET, 10, ea; LI 339: 90-DEGREE HOOK AND PICK, 10, ea; LI 340: 1/4IN HEX BIT SD RATCHET, 10, ea; LI 341: 1/4DR SPIN HANDLE/COMFORT GRIP, 10, ea; LI 342: 6"" KNURLED EXTENSION-1/4"" DR, 10, ea; LI 343: 1/2""X12' LOCKING TAPE, 10, ea; LI 344: 8"" LONG REACH FLATNOSE PLIERS, 10, ea; LI 345: HEAVYWEIGHT FENDER COVER, 10, ea; LI 346: KS2 COMBO WR 3/8IN/12PT, 10, ea; LI 347: KS2 COMBO WR 7/16IN/12PT, 10, ea; LI 348: KS2 COMBO WR 1/2IN/12PT, 10, ea; LI 349: KS2 COMBO WR 9/16IN/12PT, 10, ea; LI 350: KS2 COMBO WR 5/8IN/12PT, 10, ea; LI 351: KS2 COMBO WR 11/16IN/12PT, 10, ea; LI 352: KS2 COMBO WR 3/4IN/12PT, 10, ea; LI 353: KS2 COMBO WR 13/16IN/12PT, 10, ea; LI 354: KS2 COMBO WR 7/8IN/12PT, 10, ea; LI 355: KS2 METRIC COMBO WR 10MM/12PT, 10, ea; LI 356: KS2 METRIC COMBO WR 11MM/12PT, 10, ea; LI 357: KS2 METRIC COMBO WR 12MM/12PT, 10, ea; LI 358: KS2 METRIC COMBO WR 13MM/12PT, 10, ea; LI 359: KS2 METRIC COMBO WR 14MM/12PT, 10, ea; LI 360: KS2 METRIC COMBO WR 15MM/12PT, 10, ea; LI 361: KS2 METRIC COMBO WR 16MM/12PT, 10, ea; LI 362: KS2 METRIC COMBO WR 17MM/12PT, 10, ea; LI 363: KS2 METRIC COMBO WR 18MM/12PT, 10, ea; LI 364: KS2 METRIC COMBO WR 19MM/12PT, 10, ea; LI 365: 5/16"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 366: 11/32"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 367: 3/8"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 368: 7/16"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 369: 1/2"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 370: 9/16"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 371: 5/8"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 372: 11/16"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 373: 3/4"" STUBBY KS2 CMB WR 12PT, 10, ea; LI 374: 10MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 375: 11MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 376: 12MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 377: 13MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 378: 14MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 379: 15MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 380: 16MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 381: 17MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 382: 18MM STUBBY KS2 CMB WR 12PT, 10, ea; LI 383: 19MM 12PT KS2 STUBBY CMB WR, 10, ea; LI 384: 8"" SLIP JOINT PLIERS, 10, ea; LI 385: 7""HIGH LEVERAGE DIAG CUTTERS, 10, ea; LI 386: 8"" NEEDLE NOSE PLIERS W/CUTTER, 10, ea; LI 387: 3/32"" SUPER STEEL PIN PUNCH, 10, ea; LI 388: 5/32"" SUPER STEEL PIN PUNCH, 10, ea; LI 389: 3/16"" SUPER STEEL PIN PUNCH, 10, ea; LI 390: 3/32"" S/S STARTER PUNCH, 10, ea; LI 391: 5/32"" S/S STARTER PUNCH, 10, ea; LI 392: 3/16"" S/S STARTER PUNCH, 10, ea; LI 393: SUPER ST CENTER PUNCH 3/8""HEX, 10, ea; LI 394: 3/8 POWER DRIVE CHISEL, 10, ea; LI 395: 1/2 POWER DRIVE CHISEL, 10, ea; LI 396: 5/8 POWER DRIVE CHISEL, 10, ea; LI 397: 5"" AUTOMATIC CENTER PUNCH, 10, ea; LI 398: 10 X 12MM FLARE NUT WRENCH, 10, ea; LI 399: 11MM & 13MM FLARE NUT WRENCH, 10, ea; LI 400: 12MM & 14MM FLARE NUT WRENCH, 10, ea; LI 401: 15MM & 17MM FLARE NUT WRENCH, 10, ea; LI 402: 16MM & 18MM FLARE NUT WRENCH, 10, ea; LI 403: 19MM & 21MM FLARE NUT WRENCH, 10, ea; LI 404: 9 X 11MM FLARE NUT WRENCH, 10, ea; LI 405: 3/8 X 7/16 FLARE NUT WRENCH, 10, ea; LI 406: 1/2 X 9/16 FLARE NUT WRENCH, 10, ea; LI 407: 5/8 X 11/16 FLARE NUT WRENCH, 10, ea; LI 408: 3/4 X 13/16 FLARE NUT WRENCH, 10, ea; LI 409: 1/4 X 5/16 FLARE NUT WRENCH, 10, ea; LI 410: MINI STRAIGHT PICK, 10, ea; LI 411: MINI COMPOUND BEND PICK, 10, ea; LI 412: MINI 90-DEGREE BENT PICK, 10, ea; LI 413: MINI HOOK PICK, 10, ea; LI 414: MACSIMIZER MILL FILE 10IN, 10, ea; LI 415: MACSIMIZER MINI SQUARE FILE, 10, ea; LI 416: MACSIMIZER MILL FILE 9-1/2IN, 10, ea; LI 417: 8"" MILL BASTARD FILE, 10, ea; LI 418: 1/8"" X 3"" CABINET TIP, 10, ea; LI 419: 3/16"" X 3"" CABINET TIP, 10, ea; LI 420: PH0 X 3"", PHILLIPS TIP, 10, ea; LI 421: PH1 X 3"", PHILLIPS TIP, 10, ea; LI 422: 1/4"" X 1.5"" KEYSTONE ORG, 10, ea; LI 423: 1/4 X 4"" BOLSTER KEYSTONETIP, 10, ea; LI 424: 5/16 X 6"" BOLSTER KEYSTONE ORG, 10, ea; LI 425: 3/8 X 8"" BOLSTER KEYSTONE ORG, 10, ea; LI 426: 3/8 X12"" BOLSTER KEYSTONE ORG, 10, ea; LI 427: PH2 X 1.5"" PHILLIPS ORG, 10, ea; LI 428: PH1 X 3"" BOLSTER PHILLIPS ORG, 10, ea; LI 429: PH2 X 4"" BOLSTER PHILLIPS ORG, 10, ea; LI 430: STRAIGHT RING PLIERS, 10, ea; LI 431: CONVERTIBLE PLIERS-90+D, 10, ea; LI 432: STRAIGHT RING PLIERS, 10, ea; LI 433: STRAIGHT RING PLIERS, 10, ea; LI 434: CONVERTIBLE PLIER-90+D, 10, ea; LI 435: DIGITAL MULTIMETER, 10, ea; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is adomestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/d847defae93e47e4bdd6a486e36ea72e/view)
Place of Performance: Address: 1st Special Forces Command BLDG 5741, PERSHING ROAD, Fort Bliss, TX 79916, USA; Zip Code: 79916; Country: USA
Record: SN06078347-F 20210731/210729230127 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

23 -- 23--Tools