SOURCES SOUGHT
66 -- Automated Microplate Dispenser/Washer - Sources Sought
- Notice Date
- 7/29/2021 9:34:34 AM
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- USDA ARS MWA AAO ACQ/PER PROP PEORIA IL 61604 USA
- ZIP Code
- 61604
- Solicitation Number
- 12505B21Q0117SS
- Response Due
- 8/5/2021 3:00:00 PM
- Archive Date
- 08/20/2021
- Point of Contact
- Aaron Dimeo, Phone: 6088900067
- E-Mail Address
-
aaron.dimeo@usda.gov
(aaron.dimeo@usda.gov)
- Description
- A market survey is being conducted to determine if there are adequate Small Business, SBA certified HUBZone, SBA-certified 8(a), Women-Owned, or Service Disabled Veteran-Owned Small Business (SDVOSB) contractors available for a proposed project who meet the specific criteria outlined below. This is a SOURCES SOUGHT NOTICE ONLY. This is not a solicitation Announcement or Request for Quote. It does not constitute any commitment by the Government. No award will result from this notice. The purpose is to conduct market research to gain knowledge of potentially qualified sources and to determine the capability of Small Business and/or Large Business companies to provide the supplies/services described below. Responses to this Sources Sought Notice will be used by the Government to make an appropriate acquisition decision. Department of Agriculture (ARS) requests responses from ALL socioeconomic categories in order to gain a more complete understanding of the market for these products and service. The USDA Agricultural Research Service (ARS) will not award a contract on the basis of responses or pay for the preparation of any information submitted. Respondents will not be notified of the results of this notice. After completing an analysis of the responses, the Government will determine whether to limit competition to 8(a), HUBZone, SDVOSB, Women-Owned, or other small business firms, or to proceed with issuing an unrestricted solicitation, inviting full and open competition. The NAICS code for the expected acquisition is 334516, with a Size Standard of 1,000 employees and the PSC Code is 6630. Any subsequent procurement will be conducted as a commercial item purchased in accordance with FAR Part 12 and as a Simplified Acquisition Procedure in accordance with FAR Part 13. The Department of Agriculture (ARS) has the need for the following products: 001) Automated Microplate Dispenser/Washer Scope of Work: The USDA-ARS Virus and Prion Research Unit of the National Animal�Disease Center (NADC) in Ames, IA is seeking sources for an automated microplate dispenser/washer Background: Our laboratory requires an automated microplate dispenser/washer capable of washing 12-well to 96-well sized plates. Technical Requirements:� Automated microplate dispenser/washer requirements include: Must have configurable dispensing options for 12-96 well plates Must have onboard software so no computer is required Must have an LED user interface for flexible control of instrument Must be capable of individual well mapping Must have indirect dispense, to allow for washing of cells Must be able to dispense a wide volume range (20-30,000 uL) Must include two module arms and one peristaltic dispense pump Must include dual syringe pumps Must include dispense and waste system Must include unit training and installation Minimum 1-year parts and labor warranty Quantity: 1 Note: Quoted products should be USA Manufactured if at all possible. Government Furnished: Escorted access to the laboratory must be coordinated in advance for installation and training.� Evaluation Factors:� Lowest price, technically acceptable. The government intends to award a firm-fixed price award based on the lowest price technically acceptable product. The lowest priced product will be evaluated first; if not found acceptable, the next lowest priced product will be evaluated, and so on until an acceptable product is identified. The government will not review higher priced products if the lowest priced product is determined to be technically acceptable. For a vendor�s products to be considered technically acceptable, they must meet all of the technical requirements identified in the solicitation. Key Deliverables: Automated Microplate Dispenser/Washer Instillation Training Delivery: Delivery to be made to USDA, 1920 Dayton Avenue, Building 24, Ames, IA 50010 within 30 days of date of award. The vendor shall provide all items F.O.B: destination. Location of the Government site is aboard USDA-ARS Ames, IA and will be identified in the contract. The Government anticipates award of a Firm Fixed Price contract. Capability Statement: Companies who have the experience, as well as an interest in doing business with ARS, should submit a Capabilities Statement which, for this notice, is not expected to be a proposal, but rather short statements regarding the company�s ability to demonstrate their expertise and experience in relation to the areas specified in this notice. Companies should also indicate whether they are a Small Business, SBA-certified HUBZone, SBA-certified 8(a), SDVOSB, or Women-Owned Small Business. To be eligible, all vendors must be registered in the System for Award Management (SAM) with a current and active registration. A DUNS (Dun and Bradstreet) number is required in order to register in SAM. A vendor can contact SAM by calling 1-866-606-8220 or e-mail at www.sam.gov. NO EXCEPTIONS.�Vendor must include their DUNS# on their capability statements. To be eligible, all vendors must also be registered in SAM under the specific NAICS code listed as part of this sources sought. If a prospective vendor is not registered under the specified NAICS code and would qualify to be registered under it then they must update their SAM registration prior to providing a capabilities statement. Finally, to be eligible, all vendors must be NDAA 889 Certified. If they do not currently have a NDAA 889 Certification, then they must complete the attached NDAA 889 Certification form and submit it with your capability statement so that they can be added to the list of NDAA 889 Certified vendors. Submitting a Capability Statements: Responses should be submitted in GSA eBuy by Thursday, August 5, 2021 at 5:00 p.m. CST. Telephone inquiries will not be accepted. Disclaimer: This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate.�Respondents are also advised that under no obligation to acknowledge receipt of information or provide feedback about any of the information received.�After review of the responses received, the Government may issue a pre-solicitation synopsis and solicitation. No proprietary, sensitive, confidential or classified information shall be included with your response. The Government reserves the right to use any non-proprietary technical information in any resultant solicitation.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/abd43fa506054713b81263a2a65cd02e/view)
- Place of Performance
- Address: Ames, IA 50010, USA
- Zip Code: 50010
- Country: USA
- Zip Code: 50010
- Record
- SN06078927-F 20210731/210729230131 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |