SOLICITATION NOTICE
66 -- High-Vacuum Combination Metal Sputter and Carbon Evaporation System
- Notice Date
- 8/2/2021 8:40:49 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334513
— Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Contracting Office
- DEPT OF COMMERCE NIST GAITHERSBURG MD 20899 USA
- ZIP Code
- 20899
- Solicitation Number
- 1333ND21QNB640344
- Response Due
- 8/6/2021 10:00:00 AM
- Archive Date
- 09/15/2021
- Point of Contact
- Sadaf Afkhami, Phone: 3019753976, Donald Graham, Phone: 3019758567
- E-Mail Address
-
Sadaf.Afkhami@nist.gov, donald.graham@nist.gov
(Sadaf.Afkhami@nist.gov, donald.graham@nist.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT I to RFQ# 1333ND21QNB640344: The purpose of this Amendment is three-fold: 1.) to provide responses to timely submitted clarification questions; 2.) to provide a revised Statement of Requirements; and 3.) to extend the quotation submission due date. The RFQ is amended as follows: 1.) Question: This question is in regard to the below installation language provided in the Statement of Requirements: �Installation will be completed by NIST staff with remote assistance from the contractor. Installation will be within 7 calendar days of receipt of all components.� �Would the NIST allow our service engineer(s) on-site to complete this installation? Answer: Yes, the contractor shall complete installation at NIST within 14 calendar days of receipt of all components. 2.) A revised Statement of Requirements dated 8/2/21 with revisions highlighted in yellow has been attached. The Statement of Requirements has been revised to state the following: �Installation: The contractor shall complete installation at NIST Gaithersburg, MD within 14 calendar days of receipt of all components.� 3.) The quotation submission due date has been extended from 1:00 PM EST on August 4, 2021 to 1:00 PM EST on August 6, 2021. END OF AMENDMENT I. __________________________________________________________ DESCRIPTION THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED.� THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR PARTS 12 AND 13. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) FAC 2021-06 effective July 12, 2021. The associated North American Industrial Classification System (NAICS) code for this procurement is 334513- Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables with a small business size standard of 750 Employees. This acquisition is being procured as a Total Small Business Set Aside.� Quoters must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until time of award, during performance, and through final payment of any contract resulting from this measursolicitation. The Contracting Officer will confirm that quoters have an �active� registration at the www.sam.gov website upon receipt of the quotation. If the SAM.Gov registration is not active, the quotation will not be considered for award. The National Institute of Standards and Technology (NIST), Material Measurement Laboratory, Materials Science and Engineering Division (MSED) is responsible for electron microscopy imaging of a variety of materials.� Many of these samples are non-conductive and require very thin coatings of conductive materials to allow analytical electron microscopy to be performed.� Coating samples with a uniform film less than 10 nm thick of either metal, typically gold (Au), or carbon (C) is common practice when performing microanalysis of non-conductive samples.� MSED requires a new coating system capable of performing both metal sputtering using Argon plasma as well as carbon evaporation.� The sputter coated films must be fine grained and appropriate for high resolution imaging, which typically requires high-vacuum coating systems. The objective of this solicitation is to establish a Firm-Fixed-Price purchase order based on the specifications described in the attached Statement of Requirements (SOR). SPECIFIC REQUIREMENTS Responsible quoters shall provide a quotation for the following Contract Line Items (CLINs), in accordance with the specifications outlined in the attached Statement of Requirement. All equipment must be new. Used or remanufactured equipment will not be considered for award: BASE LINE ITEMS: Line Item 0001: (Quantity 1 Each) High-Vacuum Combination Metal Sputter/Carbon Evaporation System, in accordance with the Statement of Requirements. Line Item 0002: (Quantity 2 Hours) Training, in accordance with the Statement of Requirements. Line Item 0003: (Quantity 1 Year) Warranty, in accordance with the Statement of Requirements. DELIVERY TERMS Delivery terms shall be FOB Destination. The Contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. ACCEPTANCE CRITERIA Final acceptance by the Government shall be granted after successful completion of delivery and confirmation that the equipment meets all required specifications. Acceptance testing will include depositing gold on a non-conductive scanning electron microscope (SEM) sample and depositing carbon on a different non-conductive (SEM) sample.� Evaluation of the two samples with be done using a NIST owned high-resolution field emission scanning electron microscope (FE-SEM). Should any deficiencies be noted prior to final acceptance, the Contractor will be notified of all deficiencies, and provided the opportunity to correct all deficiencies at their sole expense, in accordance with the commercial terms and conditions of the contract. PAYMENT SCHEDULE The Contractor shall be paid in one lump sum payment, upon submission of a proper invoice and upon successful completion of delivery and confirmation, by the Government, that all required specifications are met. EVALUATION CRITERIA & BASIS FOR AWARD: The Government intends to award a purchase order resulting from this solicitation to the responsible Contractor whose quotation, conforming to the solicitation, provides the lowest priced, technically acceptable quote. Technically acceptable means that the quote: Meets or exceeds the minimum equipment specifications listed within the Statement of Requirements; �Meets training, warranty, and installation requirements as applicable; and �Meets the required delivery schedule.� Price: The price evaluation will determine whether the quoted prices are fair and reasonable in relation to the solicitation requirements.� Quoted prices must be entirely compatible with the technical quotation. INSTRUCTIONS: � Completed Solicitation Provisions A completed version of all required solicitation provisions (see attached provisions/clauses document � required submissions highlighted in blue).� � Due Date for Quotations and Questions All quotations must be submitted, via e-mail, to Sadaf Afkhami, Contract Specialist, at Sadaf.Afkhami@nist.gov. Submissions must be received no later than 1:00 p.m. Eastern Time on August 4, 2021. FAX quotations will not be accepted. �Quoters must reference the RFQ number in the subject line of the e-mail submission. ��Quotes shall not be deemed received by the Government until the quotation has entered the e-mail inbox of the individual(s) set forth above. � Questions: All questions regarding this notice must be submitted via e-mail to Sadaf Afkhami, at Sadaf.Afkhami@nist.gov, no later than 1:00 p.m. Eastern Time on July 27, 2021. Quotation Preparation Instructions Each quotation shall consist of two (2) separate electronic files: (1) Technical Quotation and (2) Pricing Quotation.� � Technical Quotation: (1) Technical description and/or product literature.� Quoters shall include the manufacturer, make and model of the product, manufacturer sales literature or other product literature which CLEARLY DOCUMENTS that the offered products meet or exceed all specifications outlined in the statement of requirements. It is the responsibility of the quoter to ensure that submitted documentation clearly addresses all specifications and requirements. � (2) If product literature does not address any given specification, a discussion of how the Contractor will meet or exceed that required specification. Modification must be discussed. It is the responsibility of the quoter to ensure that the discussion clearly addresses the modification and how the required specification(s) will be met with the quoted modification.� � (3) The quoted delivery timeline for the base line item. � (4) A description of the quoted training. � (5) A description of the quoted warranty. Price Quotation: (1) All Quoters shall submit a firm fixed price, FOB Destination, price quotation for the base line items. The quotation must include a unit price and total amount for each line item and the aggregate price for all base line items. (2) The price quotation shall include a cover page with the following information: The solicitation number 1333ND21QNB640344; The name and address, of the Quoter; The name, phone number, and email address of the Quoter�s point of contact; DUNS # for Quoter�s active SAM.Gov registration. Any applicable discount terms. A statement that the Contractor agrees to all terms, conditions, and provisions included in the solicitation. If the Contractor objects to any of the terms and conditions contained in this solicitation, the Contractor shall state �The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:� [Contractor shall list exception(s) and rationale for the exception(s)].� It is the sole responsibility of the Contractor to identify in their quote any exceptions to the terms and conditions of the solicitation.� A statement that the quotation is valid for a minimum of 60 days from the response deadline of this solicitation. � � Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC).� If a contractor submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price.� However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractor�s FSS or GWAC contract. PROVISIONS AND CLAUSES: The provisions and clauses applicable to this solicitation are identified in Attachment 2 titled �Applicable Clauses & Provisions�. The full text of a Federal Acquisition Regulation (FAR) provision or clause may be accessed electronically at �www.acquisition.gov/far.� The full text of a Department of Commerce Acquisition Regulation (CAR) provision or clause may be accessed electronically at or http://www.osec.doc.gov/oam/acquistion_management/policy/. � ATTACHMENTS: The following attachments apply to this solicitation: 1. Statement of Requirements 2. Applicable Clauses & Provisions
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/5067f06488ff4d2ca8a3884b2e5d434e/view)
- Record
- SN06081854-F 20210804/210802230123 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |