SAMDaily.us | PRESOL | 51 | 51--Sets, Kits, and Outfits of Hand Tools

SAMDAILY.US - ISSUE OF AUGUST 05, 2021 SAM #7187
SOLICITATION NOTICE

51 -- 51--Sets, Kits, and Outfits of Hand Tools

Notice Date: 8/3/2021 2:56:35 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 333991 — Power-Driven Handtool Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: FTIRWINPHOENIXTEAMgdf72021
Response Due: 8/16/2021 11:30:00 AM
Archive Date: 02/12/2022
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FTIRWINPHOENIXTEAMgdf72021 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 333991 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-08-16 14:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be FORT IRWIN, CA 92310 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Jobox - Job Site Tool Storage 98941719 EQUAL, 1, EA; LI 002: 24"" Pipe Wrench, Cast Iron, 3"" Capacity 0660948 EQUAL, 3, EA; LI 003: 14"" Pipe wrench, Cast Iron, 2"" capacity 64397821 EQUAL, 3, EA; LI 004: 18"" Pipe wrench, Cast Iron, 2 1/2"" capacity 06609580 EQUAL, 3, EA; LI 005: 8"" Pipe wrench, Cast Iron, 1"" capacity 64397862 EQUAL, 3, EA; LI 006: Torque impact wrench, 1"" drive 46114211 EQUAL, 1, EA; LI 007: Torque impact wrench, 3/4"" drive 79516142 EQUAL, 1, EA; LI 008: Impact wrench/ratchet, Cordless, 3/4"" drive 38739678 EQUAL, 2, EA; LI 009: Torque Impact Wrench, 1/2"" drive 79516118 EQUAL, 2, EA; LI 010: Impact socket set, 20 pc, 3/4"" drive, 5/8"" to 2"" range, Black finish 38528972 EQUAL, 1, EA; LI 011: Impact socket set, 21 pc, 1"" drive, 3/4"" to 2"" range, Black finish 37161544 EQUAL, 1, EA; LI 012: Impact socket set, 27 pc, 1/2"" drive, Deep well, 7/16"" to 1-1/4"" range 50634963 EQUAL, 1, EA; LI 013: Horizontal Air Compressor, Gas engine, 30gal, 175 max PSI 67485896 EQUAL, 1, EA; LI 014: Air Compressor Start-up Kit 02451474 EQUAL, 1, EA; LI 015: Multipurpose Air Hose, 3/8""ID x 0.61""OD, 50' long, 300 working psi, 1/4"" fitting, 140�F 72332265 EQUAL, 2, EA; LI 016: Multipurpose Air Hose, 3/8""ID x 0.61""OD, 50' long, 300 working psi, 1/4"" fitting, -30 to 176�F 57685778 EQUAL, 6, EA; LI 017: Multipurpose Air Hose, 3/8""ID x 0.61""OD, 25' long, 300 working psi, 1/4"" fitting, -30 to 176�F 57685786 EQUAL, 2, EA; LI 018: Multipurpose Air Hose, 1/2""ID x 0.74""OD, 50' long, 300 working psi, 3/8"" fitting, 140�F 66678418 EQUAL, 2, EA; LI 019: Pry Bar Set, 4pc, Includes 12""/17""/25""/31"" 74988544 EQUAL, 4, EA; LI 020: Extension Ladder, 20' high, Type IA Rating, Fiberglass, 300lb capacity 00236398 EQUAL, 1, EA; LI 021: Rivet Nut Tool Kit, Pneumatic, #8 to 3/8"" 56587603 EQUAL, 1, EA; LI 022: Cylinder Hand Truck, 45"", 500lb capacity, 13x24"" base plate 93790368 EQUAL, 1, EA; LI 023: Oscillated Coil Dispenser for 3/4"" strapping 01700988 EQUAL, 1, EA; LI 024: Oscillated Coil Steel Strapping, 3/4"" wide, 0.02"" thick, 2,058' long, 1,760lb capacity 01700699 EQUAL, 1, EA; LI 025: Strapping Tensioner, 3/4"" wide 82363318 EQUAL, 1, EA; LI 026: Strapping Cutter, 3/4"" wide 83052548 EQUAL, 1, EA; LI 027: Steel Crimper, 3/4"" wide 89796213 EQUAL, 1, EA; LI 028: Snap On, Steel Open Seal, 3/4"" wide, Pack of 1,000 80086374 EQUAL, 1, EA; LI 029: 18"" Functional Utility Bar, Steel 80086374 EQUAL, 4, EA; LI 030: Fixed Lifting Eye Bolt, Steel, Fully Threaded, 3/4-10 Thread, 2"" Shank 74644550 EQUAL, 50, EA; LI 031: #8 Bugle Head, Phillips Steel Deck Screw, 3"", Grade C 05664271 EQUAL, 50, EA; LI 032: #6 Bugle Head, Phillips Steel Deck Scerw, 1-5/8"", Grade C 05664255 EQUAL, 20, EA; LI 033: Concrete Screw & Masonry Fastener, Hex Drive, Steel, 1/4"" diameter, 3-1/4"" length 04055406 EQUAL, 2, EA; LI 034: Concrete Screw & Masonry Fastener, Hex Drive, Steel, 1/4"" diameter, 2-1/4"" length 70998190 EQUAL, 4, EA; LI 035: Tipped Rotary Hammer Drill Bits, Carbide, 3/16"" Diameter 00355974 EQUAL, 15, EA; LI 036: Power&Impact Screwdriver Bit Set, Phillips, 1"" to 2.9"" Range 13012646 EQUAL, 12, EA; LI 037: Hex Drive, Phillips Power Screwdriver Bit, #1, 1/4"" drive 75152207 EQUAL, 10, EA; LI 038: Phillips Screwdriver Bit, #2, 1/4"" drive 86100070 EQUAL, 5, EA; LI 039: Inflator Gauge, 10 to 160 psi 86100070 EQUAL, 2, EA; LI 040: Lead-In Whip Hose, 3/8"" diameter, 2' Long, 300psi, 1/4"" fitting 59840876 EQUAL, 2, EA; LI 041: Nylon braided Seine Twine, #18, 156 lbs, Pink, 250 lb per ft 00320861 EQUAL, 3, EA; LI 042: Nylon braided Seine Twine, #18, 156 lbs, Orange, 1000 lb per ft 45890548 EQUAL, 3, EA; LI 043: Rivet Nut, Steel, 0.58"" 33JF13-UC EQUAL, 5, EA; LI 044: L,NTRL PDR-Free, 4.7 mil, PLM THK 35ZF01-UC EQUAL, 2, EA; LI 045: Rivet Nut, Aluminum, 0.68"" 444P28-UC EQUAL, 5, EA; LI 046: Impact Wrench, Corded, 738 ft-lb 1GUB3-UC EQUAL, 1, EA; LI 047: Extension Cord, 50', 3-Way 03488 EQUAL, 5, EA; LI 048: Padlock, KD, 1-1/8"", 5 pin A5200GLN EQUAL, 100, EA; LI 049: Portable Inverter Generator, Gas 491N31-UC EQUAL, 1, EA; LI 050: Washer, Spherical, 25/32"" ID, 5/8"" OD 1JYJ1-UC EQUAL, 1750, EA; LI 051: Rivet Nut, Steel, 0.805"" 33JF43-UC EQUAL, 5, EA; LI 052: Bolt, Flange, 3/4"", Pack of 80 4RXG7-UC EQUAL, 30, EA; LI 053: Chisel, Flat, HS1911 6MR14-UC EQUAL, 5, EA; LI 054: Chisel, Flat, SDS Max, 12"" 20PK74-UC EQUAL, 5, EA; LI 055: Chisels, SDS Max, Shank Oval, 16"" 451N61-UC EQUAL, 5, EA; LI 056: Chisel, Bull Pt, SDS Max, 18"" 22UV10-UC EQUAL, 5, EA; LI 057: Chisel, Demo Scaling 45L221-UC EQUAL, 5, EA; LI 058: Axe Mattock, 26"", 2 lb 22F046-UC EQUAL, 10, EA; LI 059: Rotary Hammer Kit, Cordless 209F87-UC EQUAL, 4, EA; LI 060: Stepladder, 9-17', Aluminum 4ZA98-UC EQUAL, 4, EA; LI 061: Journeyman Select Edge 2.0 54RZ65-UC EQUAL, 1, EA; LI 062: Steel, A36, Flat Bar, 1/4 x 3 SA36FB143-UC EQUAL, 400, EA; LI 063: Steel, A36, Flat Bar, 1/8 x 1 SA36FB181-UC EQUAL, 250, EA; LI 064: Steel, A36, Flat Bar, 1/8 x 2 SA36FB182-UC EQUAL, 250, EA; LI 065: Steel, A36, Flat Bar, 1/4 x 6 SA36FB146-UC EQUAL, 2500, EA; LI 066: Steel, A36 Angle, 2 x 2 x 1/4 SA36A214-UC EQUAL, 400, EA; LI 067: Steel, A36 Angle, 1 x 1 x 1/8 SA36A114-UC EQUAL, 250, EA; LI 068: Steel, A500, Rectangle Tube, 2 x 4 x 0.065 SA500RCT240-UC EQUAL, 75, EA; LI 069: Steel, Square Tube, 1-1/2 x 1-1/2 x 1/8 SA500SQT1121-121 EQUAL, 300, EA; LI 070: Steel, Square Tube, 2 x 2 x 0.12 SA500SQT218-UC EQUAL, 300, EA; LI 071: Steel, A500, Square Tube, 4 x 4 x 1/8 SA500SQT4418-UC EQUAL, 275, EA; LI 072: Steel, A513, Square Tube, 1 x 1 x 0.095 SA513SQT109-UC EQUAL, 250, EA; LI 073: Steel, A36, Plt Hr, 0.25 SA36PLT14-UC EQUAL, 10, EA; LI 074: Steel, 1008, Cold Roll Sheet, 18ga SA1008S048-UC EQUAL, 20, EA; LI 075: Steel, 1008, Cold Roll Sheet, 11ga SA1008S125-UC EQUAL, 10, EA; LI 076: Steel, Hinge 3"", Weld On SA36HINGEW3-UC EQUAL, 200, EA; LI 077: Rail Road Ties, 8' 100023488 EQUAL, 4000, EA; LI 078: Misting Fan, Kobalt, 7"", 3-speed, indoor/outdoor 1930595 EQUAL, 65, EA; LI 079: Bucket, 5gal, Plastic 954434 EQUAL, 65, EA; LI 080: Battery Charger, Kobalt, 24V MAX 672833 EQUAL, 30, EA; LI 081: Battery, Kobalt, 24V MAX, Lithium 673802 EQUAL, 75, EA; LI 082: Concrete, 60 lb bag 100318478 EQUAL, 56, EA; LI 083: 1/1/2 in x 2-1/2 in Zinc-Plated Steel nail Plate(50-Pack)100141141 EQUAL, 1, EA; LI 084: 158pc Electrical Wire Conncector Cap w/Spring Insert 312551287 EQUAL, 1, EA; LI 085: 100ft 12/3 Solid Romex 202316450 EQUAL, 1, EA; LI 086: Gray Outdoor Flood Light Waterproof Lampholder Kit 300854221 EQUAL, 2, EA; LI 087: 15 Amp Single Pole Toggle Switch 100026991 EQUAL, 5, EA; LI 088: 20 Amp Self-Test Smartlock Pro Slim Duplex Tamper Resistant GFCI Outlet (3-Pack) 303954635 EQUAL, 1, EA; LI 089: PVC 1-Gang 18 cu in New Work Electrical Switch and Outlet Box, Case of 100 100404124 EQUAL, 5, EA; LI 090: PVC 2-Gang 32 cu in New Work Electrical Switch and Outlet Box, Case of 50 202843352 EQUAL, 2, EA; LI 091: 18 cu in Polycarbonate Round New Work Ceiling Electrical Box 100128777 EQUAL, 2, EA; LI 092: 3/8 in Non-Metallic Twin Screw Cable Clamp connector (5-Pack) 100133208 EQUAL, 4, EA; LI 093: Plastic Keyless Lamp Holder 100356849 EQUAL, 3, EA; LI 094: Spin Light 11 in LED Flush Mount Ceiling Light High Output 1600 Lumens 22-Watt 205790078 EQUAL, 3, EA; LI 095: Decora 1-Gang Midway Nylon Wall Plate- White (4-Pack) 313936201 EQUAL, 2, EA; LI 096: White 3-Gang toggle Wall Plate 100356915 EQUAL, 5, EA; LI 097: White 2-Gang Toggle Wall Plate 100356913 EQUAL, 2, EA; LI 098: White 1-Gang Toggle Wall Plate 202059761 EQUAL, 2, EA; LI 099: White 1-Gang Jumbo Duplex Outlet Wall Plate 100356856 EQUAL, 10, EA; LI 100: 3M Temflex 3/4in x 60ft 1700 Electrical Tape- Black 310698741 EQUAL, 2, EA; LI 101: 7.75 in Combination Electricians 6-in-1 Wire Strippers 202966263 EQUAL, 1, EA; LI 102: Screwdriver Set (6-Piece) Magnetic Tip 302174847 EQUAL, 1, EA; LI 103: Zinc-Plated Slide Bolt 202034095 EQUAL, 6, EA; LI 104: Defiant Stainless Steel Hall/Closet Passage Door Knob 304969148 EQUAL, 10, EA; LI 105: 36 in x 80 in Left Hand Swing Utility Primed Steel Prehung Door w/no Brickmold 100072873 EQUAL, 6, EA; LI 106: R-30 Pink Unfaced Fiberglass Insulation Roll 15 in x 25 ft 202585906 EQUAL, 7, EA; LI 107: 8 ft Corrugated Galvanized Steel 29-Gauge Roof Panel 205532365 EQUAL, 100, EA; LI 108: 10 ft Ridge Cap Galvanized Steel 29-Gauge Corrugated Roof Flashing 202093115 EQUAL, 5, EA; LI 109: 24 in Horizontal Plastic Closure Strips (6-Pack) 100067957 EQUAL, 10, EA; LI 110: 1-1/2 in x 1-1/2 in x 10 ft Galvanized Steel Drip Edge 202093169 EQUAL, 30, EA; LI 111: 1-1/2 in Wood Screw #10 Galvanized Hex Head Roof Accessory (100 Pack)202322921 EQUAL, 4, EA; LI 112: 50 ft Butyl Sealant Tape Roof Accessory 205945574 EQUAL, 3, EA; LI 113: 4 sq ASTM Type 15 Felt Roll 202081051 EQUAL, 3, EA; LI 114: Henry 208 Wet Patch 10.1 oz Roff Cement leak repair 100082405 EQUAL, 20, EA; LI 115: Husky Heavy Duty Utility Blades Dispenser (100-Pack)205037418 EQUAL, 1, EA; LI 116: Stanley Quick Change Retractable Utility Knife (2-Pack)205074559 EQUAL, 1, EA; LI 117: Grip Rite #11 x 1-1/4 in Electro Galvanized Steel Roofing Nails (5lb-Pack)100205882 EQUAL, 2, EA; LI 118: HDX 10oz Composite Drip Free Caulk Gun 304044876 EQUAL, 1, EA; LI 119: GAF Tri-Ply APP Granular Cap Sheet 39.625 in x 32.25 ft (100 sq ft net) Membrane Roll for low slope roffing in White 100031809 EQUAL, 4, EA; LI 120: 10 ft x 10 ft Double Reinforced Heavy Duty Black Mesh Tarp 302918515 EQUAL, 10, EA; LI 121: Dremel 4300 Series 1.8 Amp Variable Speed Corded Rotary Tool Kit w/Mounted Light, 40 Accessories, 5 Attachments and Case 300589719 EQUAL, 1, EA; LI 122: Dremel 36 in Flex-Shaft Attachment for Rotary Tools 100019434 EQUAL, 1, EA; LI 123: Dewalt 20-Volt Max XR Cordless Brushless 3-Speed Oscillating Multi-Tool 100019434 EQUAL, 1, EA; LI 124: Dewalt (Corded) 3 Amp Oscillating Multi-Tool Kit (29-Piece)309250506 EQUAL, 1, EA; LI 125: Delta 1/2 HP Heavy Duty Bench Oscillating Spindle Sander w/Tilt Table 205112106 EQUAL, 1, EA; LI 126: Replacement Spindle Sanding Sleeves, Assorted Sandpaper Grits 310735517 EQUAL, 5, EA; LI 127: Screw Extractor Double Edged Set 5 Parts (Size 1-5) 203522817 EQUAL, 2, EA; LI 128: Mechanics Tool Set in 3-Drawer Storage Box (232- Piece) 309749592 EQUAL, 2, EA; LI 129: Master Adjustable Wrench Set (5-Piece) 313435948 EQUAL, 2, EA; LI 130: Zipper Bags, Canvas Tool Pouches 4-Pack 100647867 EQUAL, 5, EA; LI 131: 24 in Wide Mouth Water Resistant Dual Zippered Top Tool Storage Bag w/Shoulder Strap and 16 large total pockets 312387489 EQUAL, 12, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/5daf4efa1cb24a708d905e7c5d16f2de/view)
Place of Performance: Address: BLDG 934, G AVE , FORT IRWIN, CA 92310, USA; Zip Code: 92310; Country: USA
Record: SN06083324-F 20210805/210803230121 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

51 -- 51--Sets, Kits, and Outfits of Hand Tools