SOURCES SOUGHT
83 -- BEAST CAMSS Tent Replacement Covers Reaper
- Notice Date
- 8/3/2021 2:56:38 PM
- Notice Type
- Sources Sought
- NAICS
- 332311
— Prefabricated Metal Building and Component Manufacturing
- Contracting Office
- FA3016 502 CONS CL JBSA LACKLAND TX 78236-5286 USA
- ZIP Code
- 78236-5286
- Solicitation Number
- F2MTBG1137AW01
- Response Due
- 8/11/2021 10:00:00 AM
- Archive Date
- 08/26/2021
- Point of Contact
- LANCE M WATTERS, Phone: 2106711761, Tommie Low, Phone: 2106711765
- E-Mail Address
-
LANCE.WATTERS.1@US.AF.MIL, tommie.low.1@us.af.mil
(LANCE.WATTERS.1@US.AF.MIL, tommie.low.1@us.af.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is for market research purposes only. Quotes will not be accepted at this time. This requirement is for CAMSS 20EX40 tents. The requirement are as follows: Item #1: CAMSS20EX40 Cover/End Panel and CAMSS20EX40 Liner CAMSS20EX40 Cover/End Panel P/N: CAMSS2040PF-JBSA - 15 + oz./sq. yd. Mil-Spec 44103D fabric - Boot connectors over entries can be used to connect to other shelters or vestibules - Two (2) sets of two (2) 18� ECU ports with a cable port - Total of ten (10) mesh windows with wind resistant blackout covers (cover and end panel) - Can connect multiple shelters end to end with integrated connector flap - Built in infrared (IR) blocking - Fabric includes UV inhibitors and is mold and rot resistant - Fire resistant fabric that meets NFPA 701 - Cover and ends are radio frequency welded - Each end panel includes mesh attic vent with cover - Includes part number HIT-2040EX-PCT02, HIT-2040EX-PEHD01A, and HIT-PSW01.� - No other part numbers other than listed part numbers. CAMSS20EX40 Liner P/N: CAMSS2040HH-JBSA - Minimum 8 oz./sq. yd. Mil-Spec fabric - Liner is flame resistant per test method ASTM D6413 � o After flame � 2 seconds max � o Char length � 6� max - Air sock runs the length of the shelter and has spot cooling - Includes part numbers HIT-20EX-HAT01, HIT-20EX40-HLM03, HIT-20EX40-LCF01, HIT-20EX-HLER01, HIT-20EX-HLEL01, HIT-20EX-HLS01, HIT-20EX-HLSL01, HIT-20EX-HLSR01, HIT-20EX-LMM, HIT-20EX40-AAS01, and HIT-20EX40-AAE01. - No other part numbers other than listed part numbers. Item #2: 20EX40 Solarfly - P/N: CAMSS-20EX40-SF02-T (Tan) - Withstands 55 MPH sustained winds with 65 MPH wind gust - SolarFly to not increase shelter footprint - No frame component of SolarFly required to anchor to ground - Aluminum support stands are collapsible for low cube transportation - Mesh meets ASTM D6413 for flame resistance - Cover is radio frequency welded for strength and durability - SolarFly designed and verified to fit CAMSS 20EX40 Shelter - SolarFly designed to install on existing CAMSS 20EX40 Shelter without disassembly of shelter or use of mechanical equipment - SolarFly fabric shall be supported every 8' by aluminum frame that is supported by CAMSS 20EX40 Shelter frame to reduce maintenance over time - Fly, stands, rods, ropes and spikes weigh 275 lbs. - Color is item color designated above, which matches shelter color Current Statement of Objective has a typo. Paragraph 4 is suppose to state 8 tents and 4 additional products for future repairs. Responses will be due 11 August 2021 at 12:00pm CST. Please submit a specifications document of what's being provided and capability statement.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/c098319b0cbd4c3cb8d4e93643b52c8f/view)
- Place of Performance
- Address: JBSA Lackland, TX 78236, USA
- Zip Code: 78236
- Country: USA
- Zip Code: 78236
- Record
- SN06083843-F 20210805/210803230124 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |