SPECIAL NOTICE
J -- Depot Level support for the CN-1716/A Attitude and Heading Reference Unit (AHRU) and C-12712/A Control Unit (CU).
- Notice Date
- 8/4/2021 3:24:03 PM
- Notice Type
- Justification
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- W6QK ACC-APG ABERDEEN PROVING GROU MD 21005-1846 USA
- ZIP Code
- 21005-1846
- Solicitation Number
- W56JSR20R0015
- Archive Date
- 09/03/2021
- Point of Contact
- WAI LOUIE, Phone: 4433951267, Monica D. Holmes
- E-Mail Address
-
wai.c.louie.civ@mail.mil, monica.d.holmes2.civ@mail.mil
(wai.c.louie.civ@mail.mil, monica.d.holmes2.civ@mail.mil)
- Award Number
- W56JSR21D0006
- Award Date
- 07/16/2021
- Description
- Repair and retrofit of CN-1716/A AHRU NSN: 6605-01-503-5284 P/N 765100-20 and 660515-021-8777 P/N 765100-200, C-12712/A CU NSN: 6605-01-519-3560 P/N 765200-20 and 6605-15- 012-8776 P/N 765200-200. These items were produced sole source by Northrop Grumman Italia (NGI), Via Pontina km 27,800, 00040 Pomezia, Italy, CAGE A3379. The AHRU is a self-contained strap-down, inertial reference set that provide pitch, roll, and magnetic heading, angular rate and body acceleration information to the flight instruments on UH- 60A/L Black Hawk helicopter. The CU provides the command and control of the AHRU and the interface with the avionics suite. These items contain hardware and software proprietary to NGI. Detailed technical data for this item is not available from the Army except for performance specification. Any sources capable of repairing these items must so indicate, by writing to US Army Futures Command (AFC), Combat Capabilities Development Command (CCDC), C5ISR Center�s Product Realization Systems Engineering and Quality Directorate (PRD), ATTN: RDER-PRA-AB, Building 6007, 3rd Floor, F3-140-090, Aberdeen Proving Ground, MD 21005. Companies must demonstrate that they had past experience of repair these items. The lead time requirement for repair these items is 5 months from the Date of the Contract. The response must demonstrate intimate knowledge of the system(s) including areas such as system design, interface requirements, test and fault isolation, product acceptance processes, projected parts/materials usage and the necessary special test equipment.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/292f1acc86be4583802695f23cde324a/view)
- Record
- SN06084253-F 20210806/210804230122 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |