SOURCES SOUGHT
61 -- Advanced Medium Mobile Power Sources (AMMPS)
- Notice Date
- 8/5/2021 9:15:27 AM
- Notice Type
- Sources Sought
- NAICS
- 335312
— Motor and Generator Manufacturing
- Contracting Office
- ACC-ABERDEEN PROVING GROUNDS CONT C ALEXANDRIA VA 22331-0700 USA
- ZIP Code
- 22331-0700
- Solicitation Number
- W909MY-21-R-0011
- Response Due
- 8/12/2021 1:00:00 PM
- Archive Date
- 08/27/2021
- Point of Contact
- Kadi-Jah Sheridan, Kristin Height
- E-Mail Address
-
kadi-jah.l.sheridan.civ@mail.mil, kristin.m.height.civ@mail.mil
(kadi-jah.l.sheridan.civ@mail.mil, kristin.m.height.civ@mail.mil)
- Description
- Amendment 01 I. SYNOPSIS: Title: Expeditionary Energy and Sustainment Systems (E2S2) - Advanced Medium Mobile Power Sources THIS IS A SOURCES SOUGHT NOTICE ONLY, AS PRESCRIBED BY FEDERAL ACQUISITION REGULATION (FAR) 15.201(E). THIS IS NOT A REQUEST FOR PROPOSAL. THERE WILL NOT BE A SOLICITATION, SPECIFICATIONS, OR DRAWINGS AVAILABLE AT THIS TIME. The U.S. Army (Expeditionary Energy and Sustainment Systems), requests letters of interest from qualified businesses interested in performing work under the proposed contract for Advanced Medium Mobile Power Sources (AMMPS). By way of this Market Survey/Sources Sought Notice, the U.S. Army (Expeditionary�Energy and Sustainment Systems) intends to determine the extent of capable firms that currently engaged in or can demonstrate experience in providing supplies to those described hereunder. The responses to this notice will be used for information and planning purposes and does not constitute a solicitation. This RFI is NOT a request for proposal, request for quotation, or an invitation for bid, nor does its issuance obligate or restrict the Government to any eventual acquisition approach. This RFI does not obligate the Government to issue a solicitation. Contractors are responsible for all expenses associated with participating in this RFI. At this time, proprietary information is not requested and respondents shall refrain from providing proprietary information in response to this Notice. Please be advised that all responses and submissions become Government property and will not be returned. Not responding to this Notice does not preclude participation in any future RFP, if any is issued. Responses to this Sources Sought announcement will be used by the Government to make appropriate acquisition decisions. Acknowledgement of receipt of submitted items may not be made, and respondents likely will not be notified of the outcome of the information received. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the U.S Government to form a binding contract. It is the responsibility of the interested parties to monitor this site for additional information pertaining to this Notice. II. PURPOSE: The primary objective of Amendment 01 is to update the continued procurement of AMMPS generator sets for the remaining Army Acquisition Objective (AAO) using Government Furnished Technical Data Packages and gain clear understanding of vendor technical capabilities. In addition, the purpose of this amendment is to allow additional time for responses from industry. The purpose of this RFI is to gather information to inform the Government�s strategy on a future potential contract action to procure Advanced Medium Mobile Power Sources (AMMPS) generator sets and to determine whether full and open competition or other than full and open competition is appropriate. The Army Contracting Command-Aberdeen Proving Ground (ACC-APG), Belvoir Division, is seeking sources on behalf of the Project Manager Expeditionary Energy and Sustainment Systems (PM E2S2), Product Manager Mobile Electric Power Systems (PdM MEPS) that have or will have the capability to manufacture, test, produce and deliver AMMPS generator sets using Government furnished Technical Data Packages (TDPs). The Government urges manufacturers and other potential sources to respond to this RFI to demonstrate their capability to produce AMMPS generator sets. A lack of interest from capable sources may impact the Government�s ability to use competitive procedures to procure the remaining requirements for AMMPS generator sets. III. BACKGROUND: AMMPS was developed to support the tactical power generation requirements of Department of Defense (DoD) and its components in accordance with DoD Instruction (DoDI) 4120.11 ""Mobile Electric Power Systems (MEPS)"". In accordance with DoDI 4120.11, the DoD must maintain a MEPS standard family of mobile electric power generating sources (MEPGS) both in end items, as a component of a system, and establish common military operational requirements. The AMMPS program met this requirement by providing a family of generator sets that meets the needs of the DoD. AMMPS is the third generation of the medium sized (5-60 kilowatt [kW]) DoD Standard Family of MEPGS. AMMPS replaces the second-generation medium sized Tactical Quiet Generators (TQG). AMMPS employs advanced technologies to enhance power generation capability, increase reliability, reduce system size and weight, employ Environmental Protection Agency (EPA) tier certified engines and provide improved fuel efficiency. The AMMPS program completed the Engineering and Manufacturing Development (EMD) phase of the Acquisition Life Cycle with the achievement of Milestone (MS) C Full Rate Production decision on 20 July 2011. The AMMPS program developed and fielded 5 generator set sizes operating in 50/60 Hertz (Hz) mode and 4 generator set sizes operating in 400 Hz mode. The AMMPS began initial fielding in May 2012. AMMPS was officially granted approval to enter into the Production and Deployment (P&D) phase after its design passed intensive Army and other service evaluations to assure the design met the established performance criteria dictated in the Joint Tactical Electric Power (TEP) Operational Requirements Document (ORD). The TEP ORD was converted into the TEP Capability Production Document (CPD) and approved using the Joint Requirements Oversight Council (JROC) in May 2011. To meet the standardization requirements of DoDI 4120.11, the designs, developed by Cummins Power Generation (CPG), are described on Government owned TDPs in order to procure the same configurations in future contracts. The TDPs are made up of design, vendor item and source control drawings. IV. PROCUREMENT HISTORY: Contract Number: W15P7T-04-D-A003 Contractor: Cummins Power Generation, Inc. Award Date: 29 September 2004 Expiration Date: 28 September 2014 Competitive Status: Full and Open Competition Contract Number: W909MY-15-D-0010 Contractor: Cummins Power Generation, Inc. Award Date: 15 May 2015 Expiration Date: 14 July 2016 Competitive Status: Sole Source Award IAW FAR 6.302-1 Contract Number: W909MY-18-D-0033 Contractor: Cummins Power Generation, Inc. Award Date: 29 August 2018 Expiration Date: 12 September 2022 Competitive Status: Sole Source Award IAW FAR 6.302-1 V. SCOPE: The AMMPS family of generator systems consists of 5 generator set sizes with 5 kilowatt (kW), 10kW, 15kW, 30kW and 60kW capacities and separate models to provide 50/60 Hertz (Hz) or 400 Hz power, and includes the associated interface kits, switch boxes, and trailers. There are over 20 distinct configurations within the family. The AMMPS systems are specialized, medium-sized Jet Propellant 8 (JP-8) fueled generators used to supply electricity to military systems away from a fixed electrical power source. The generators are specialized pieces of equipment due to the environmental conditions they must operate in and the weapon systems they power. The proposed acquisition is for production and delivery of AMMPS systems to meet the ongoing needs of the Army and DoD services for medium sized mobile power generators pending award of a competitive contract and achievement of full production capability under that contract. The Army Acquisition Objective (AAO) as of July 2020 is 31,646 generators across the fleet. By the end of the current IDIQ contract (September 2022), the Army will have procured approximately 26,000 generators. Therefore, the anticipated upcoming requirement will be the contract vehicle to procure the remaining generators fulfilling the AAO (approximately 7,763 units). In addition to the Army�s need, the E2S2 Program Office anticipates that other Military Departments will order approximately 681 generators. This estimate for purchases by the other Military Departments is based on historical averages and is subject to change. Performance Parameters for the AMMPS generator sets include requirements to: 1. Operate in adverse environments and with the weapon systems they power; 2. Operate in conditions from -50�F to +135�F; 3. Support a 72 hour mission without failure and no more than 1 hour of maintenance; 4. Must not be susceptible to electromagnetic interference; 5. Must not create electromagnetic interference for supported systems; 6. Survive High Altitude Electromagnetic Pulse; 7. Meet strict noise levels to prevent detection; 8. Meet fuel consumption requirements while running on non-diesel fuel; 9. Be certified for low velocity airdrop and helicopter sling load. VI. INFORMATION REQUESTED: Use the below tables to fill-in the requested information. Request: Capability Statement The U.S. AMMPS generator sets have unique military operation capabilities that meet the Government owned Technical Data Package (TDP). These units power or incorporate into digital systems across the Army portfolio to include Network/C3I, Air and Missile Defense, Long Range Precision Fires, Command Post and Combat Support/Combat Service Support Systems. Additionally, Cummins Power Generator (CPG), the current prime contractor, retains the technical data rights for a substantial portion of the AMMPS component. Please describe your technical capabilities or document such, that will satisfy AMMPS requirement to incorporate technologies that enhance the operational effectiveness of power sources through improved fuel efficiency, reduce infrared signature and noise; commonality of parts across all sizes of AMMPS, minimize weight, improve maintenance intervals (500 hours for 5 kW, 10kW, and 15kW; verified MTBF of at least 750 hours for the 30kW and 60kW), reduce electromagnetic interference; electromagnetic interference protected, improve sustainability; operate at rated loads in all military environments, capable of starting and operating on common fuels (JP-8), meet Environmental Protection Agency Tier IV Interim Compliance, include built-in diagnostics/prognostics for trouble shooting, feature automatic paralleling and synchronization; simple two button parallel. Since, CPG retains the technical data rights for thirteen (13) of AMMPS components, and based on the �approved� components specified on the design specifications that govern any AMMPS production efforts, please describe your company approach for manufacturing a compliant generator set? Response: (3 page limitation) Request: Schedule Statement The Government anticipates deliveries of AMMPS units to the Army is within 18 � 24 months, upon successful completion of First Article Test model fabrication. How much time do you anticipate needing, from the contract award date, to produce AMMPS in order to meet the Army Total Package Fielding Schedule in accordance with the Army force Generation priorities? How much time do you anticipate is necessary to fully ramp-up your production line after First Article Test approval? How much time do you anticipate is necessary to build testing facilities? How much time do you anticipate to lead time to ramp up the new Supply Chain? What is your anticipated build rate of generator sets units per day? What is your anticipated time to surge production units per day? Response: (3 page limitation) Request: Supply Chain Statement Considering AMMPS major subsystems: The engine, the alternator and the Digital Control System (CDS) are source controlled by CPG as Original Equipment Manufacturer (OEM), which are manufactured by CPG or under exclusive arrangement with CPG suppliers, and unique in form, fit, and function. Please describe your company�s strategy to acquire the source controlled components and other components that are not unique in terms of form, fit, and function, but have undergone specified testing and/or certification to assure performance to military standard. Please describe lead time to ramp up the new Supply Chain in supplying components in support of a generator set delivery schedule and the integrity of the supply chain. Please describe your company�s logistic networks to meet AMMPS material demand in a contested logistics environment? Please describe your company�s ability to support critical safety items and/or major risks & issues surrounding Diminishing manufacturing sources and material suppliers (DMSMS), including obsolescence and single point failures that could affect the 13 components that are source controlled to CPG as the Original Equipment Manufacturer? Please describe your safety metrics and how those metrics are tracked? Response: (3 page limitation) VII. COMPANY PROFILE: Provide the following information about your company. If submitting a team response, please include the requested information for all companies on the team. -�Company Name, Address, and Country of Business -��Company Representative, Business Title, Representative Phone Number, Email Address, Company Website -�Cage Code, NAICS Code (Business Size), DUNS Number -�Partners Team Approach -�Business Classification/Socio-Economic Status (e.g., large, small, 8(a), women-owned, hub-zone, SDB, Service-Disabled Veteran-owned) VIII. INSTRUCTIONS: THIS NOTICE IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being utilized to determine the availability of potential qualified contractors before determining the method of acquisition and whether there is sufficient interest from qualified businesses. As stated in the above, this Sources Sought notice is not to be considered as a commitment by the government, nor will the government pay for any information solicited or delivered. Participation in response of this RFI, will not preclude any vendor from responding to future acquisitions, either individually or as part of a team. However, a lack of interest by capable firms may increase the possibility that other than full and open procedures may be used to satisfy this requirement. Marketing brochures will not be considered adequate information in response to this RFI. Limit responses to a total page limit of ten (10) pages. The font shall be Arial and no smaller than 10pt with a least one (1) -inch margin. The Government requests that any response to this RFI be provided no later than August 12, 2021. All responses under this Sources Sought Notice must be emailed to:� � � �Kadi-Jah Sheridan, Contract Specialist, kadi-jah.l.sheridan.civ@mail.mil, and�Kristin Height, Contracting Officer, kristin.m.height.civ@mail.mil. Please use the EMAIL SUBJECT: [Contractor Name] AMMPS FY21 Market Research. Email shall be limited to 10MB. In the event multiple emails are required, please confirm all emails submitted in support of the RFI response were received. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Please note, vendors not registered in the Beta System for Award Management (SAM) database prior to award of contracts will not be eligible for award. Vendors must also be registered in SAM under the applicable NAICS code as indicated in the advertised RFP to be considered for award. Vendors may register for SAM online at www.betasam.gov or by calling 1-866-606-8220.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/ac72cc1820b448ae968dd35a9c7cf323/view)
- Record
- SN06087464-F 20210807/210805230131 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |