SAMDaily.us | PRESOL | 66 | Thermo-Reflectance Imaging System

SAMDAILY.US - ISSUE OF AUGUST 13, 2021 SAM #7195
SOLICITATION NOTICE

66 -- Thermo-Reflectance Imaging System

Notice Date: 8/11/2021 12:30:03 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 334516 — Analytical Laboratory Instrument Manufacturing
Contracting Office: DEPT OF COMMERCE NIST GAITHERSBURG MD 20899 USA
ZIP Code: 20899
Solicitation Number: NB6720102101987
Response Due: 8/20/2021 1:00:00 PM
Archive Date: 09/04/2021
Point of Contact: Lia M Arthofer
E-Mail Address: lia.arthofer@nist.gov
(lia.arthofer@nist.gov)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN SUBPART 12.6 STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS, AS SUPPLEMENTED WITH ADDITIONAL INFORMATION IN THIS NOTICE.� THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTES ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED.� This solicitation is a Request for Quote RFQ.� RFQ number is NB6720102101987.� This is a combined synopsis solicitation conducted under FAR 12.6 and 13.5 and procedures from FAR 15 will not be used.� This synopsis/solicitation incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2021-05 (effective 03/10/2021). The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 Analytical Laboratory Instrument Manufacturing, which has a size standard of 1000 Employees. This combined synopsis/solicitation is 100% set-aside for Small Business (SB). � Defense Priorities and Allocations Systems (DPAS) and assigned rating is not applicable to this request for quote (RFQ). Offerors must submit all questions concerning this solicitation in writing, via email, to the Contracting Officer, Lia Arthofer at lia.arthofer@nist.gov .Questions should be received no later than five (5) calendar days after the issuance date of this solicitation. All responses to the questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, the question responses included in the amendment to the solicitation will govern performance of the contract. Background/Scope: The National Institute of Standards and Technology (NIST) Communications Technology Laboratory (CTL) has a requirement for one (1) High Resolution Thermal Imaging System and one (1) Infrared (IR) Measurement Capabilities in accordance with the requirements listed below. The Radio Frequency (RF) Division requires a High-Resolution Thermal Imaging System capable of measurements of transient thermal response down to 5 microseconds or less.� The RF Division also requires Infrared (IR) Measurement Capabilities.� This shall be fulfilled in accordance with the specifications document attached herein.� All offerors shall provide a firm fixed price (FFP) quotation for the following line item: (All equipment must be new. Used, refurbished, prototype, or remanufactured will not be considered for award). Contract Line Item Number (CLIN)�QTY�UNIT�UNIT PRICE�APPLICABLE DISCOUNTS�TOTAL CLIN 0001 � One (1) High-Resolution Thermal Imaging System in accordance with the NIST Specifications Document below and attached herein. CLIN 0002 � One (1) Infrared (IR) Measurement Capabilities in accordance with the NIST Specifications Document below and attached herein. Minimum Requirements The system shall meet or exceed the minimum requirements identified below.� All line items shall be shipped in the original manufacturer�s packaging and include all original documentation and software, when applicable. CLIN 0001:� Quantity of one (1) High-Resolution Thermal Imaging System which meets or exceeds the minimum requirements identified below: Capability for measurement of transient thermal response down to 5 microseconds or less Include illumination and sensing capability for at least 9 visible wavelengths in the range 365-800nm Achieve temperature resolution of 250mK or less with 5 min. averaging and a spatial resolution of less than 60nm/pixel at 100x magnification Sensor(s) must have active thermal pixels of at least 2048 x 2048 Support synchronization with input and output trigger options, i.e. TTL Microscope head with 4 position turret for objectives and include 5x ,20x,100x objectives consistent with wavelengths above, with working distances > 14mm Capability for automated temperature calibration via a thermally-controlled stage with 40mm x 40mm minimum area for active temperature control,� 3 axis piezo drive with at least 100 micron travel in each axis for autofocus over the temperature range 20C to 120C with 1% or better temperature accuracy and temperature stability < +/- 0.1C, and have a rotational capability of at least +/- 10 degrees; Standalone boom for supporting optics assembly on an optical table Large range x-y stage with at least 150mm x 150mm XY travel for translation of thermally controlled stage CLIN 0002:� Quantity of one (1) Infrared (IR) Measurement Capabilities which meets or exceeds the minimum requirements identified below: IR sensor 7.5 micrometer to 13.5 micrometer wavelength with temperature resolution of 10 mK or less with 5 min. averaging and at least 640 x 520 pixels An infrared lens with magnification between 2-3x for integration with specified system Inspection and Acceptance In addition to the inspection and acceptance terms articulated in 52.212-4, the Government reserves the right to perform such performance tests and evaluations as defined below to verify specified system performance. Such tests and evaluations, if performed, shall be conducted within the environment that the system is to be operated. The Contractor has the right to be present during the tests and evaluations, if performed, at the Contractor�s expense. Inspection and acceptance shall occur within seven (7) business days after receipt of High-Resolution Thermal Imaging System and Infrared (IR) Measurement Capabilities at NIST. A visual inspection of the High-Resolution Thermal Imaging System and Infrared (IR) Measurement will be performed by the NIST TPOC to identify surface defects or any form of indication that the High-Resolution Thermal Imaging System and Infrared (IR) Measurement was damaged during transport to NIST.� The Government shall have sole discretion to require repair or replacement of damaged and/or nonconforming supplies at no cost to the Government.� The Government at any time prior to acceptance shall reject the High-Resolution Thermal Imaging System and Infrared (IR) Measurement due to defects and/or nonconformance.� The vendor is responsible for latent defects discovered any time after final inspection.� The place of acceptance shall be: �� NIST: Shipping/Receiving �� 325 Broadway � � � � � � Boulder, CO 80305 Ownership (title) of the High-Resolution Thermal Imaging System and Infrared (IR) Measurement shall transfer to NIST upon acceptance. Delivery Delivery shall be FOB DESTINATION and shall occur not later than (NLT) 90 days ARO. Delivery shall be FOB destination and shall occur within the vendor�s standard commercial lead time.� FOB Destination means:� The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery.� The contractor shall deliver all Line Items (in accordance with the specifications document) to: The National Institute of Standards and Technology�� 325 Broadway�� Boulder, CO 80305 Warranty The contractor shall warrant the entire system in accordance with the contractor�s standard commercial timeframe. Warranty shall commence after receipt and acceptance of the equipment and shall be in accordance with terms in FAR 52.212-4 Payment Schedule The Contractor shall be paid, in accordance with Net 30-day payment terms, upon receipt and acceptance of a proper invoice, in accordance with the following schedule: 100% after receipt and acceptance by the TPOC of fully delivered system. The Government anticipates inspection will occur upon: After the inspection/acceptance procedures set forth in this document have been complete NOTE:� Partial shipments and partial invoices will not be accepted, unless otherwise requested and accepted by the Contracting Officer prior to award offer. Proposed payment schedules shall be submitted with vendor�s response to the RFQ for consideration.� 52.212-1, Instructions to Offerors � Commercial Items (oct 2016) �And the attached addendum, applies to this acquisition.� The provision at 52.212-2, Evaluation�Commercial Items, as modified applies to this acquisition.� Offerors shall include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications�Commercial Items, with its offer.� Offerors shall have an active registration at www.sam.gov .� The clause at 52.212-4, Contract Terms and Conditions�Commercial items, applies to this acquisition.� The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, applies to this acquisition as noted in the attached.� The following addenda has been attached to this provision: FAR 52.212-1, INSTRUCTION TO OFFERORS-COMMERCIAL ITEMS Instructions:� Offerors shall submit their quotations so that NIST receives them not later than 2:00 PM Mountain Standard Time on 07/02/2021 FAX quotations shall not be accepted.� E-mail quotations shall be accepted at lia.arthofer@nist.gov . Please reference the RFQ number in the subject line of email communications and packages mailed.� Offerors� quotations shall not be deemed received by the Government until the quotation is entered in the e-mail box set forth above. Quotation Submission Requirements: 1). Price Quotation: The offeror shall submit an one (1) original copy of the completed price quotation electronically to lia.arthofer@nist.gov . Pricing quotation shall be separate from any other portion of the quotation.� The offeror shall provide a firm-fixed-price, FOB Destination is required, for each CLIN. Price quotations shall remain valid for a period of 90 days from the date quotations are due. 2). Technical Quotation: The technical quotation shall address the following: Technical Capability: The offeror shall submit a technical description, product literature, and/or drawings for the system it is proposing, which clearly identifies each requirement listed above. The offeror must demonstrate that its proposed system meets or exceeds each minimum requirement described above, by providing a citation to the relevant section of its technical description or product literature.� The contractor must not simply state they will meet the requirement; evidence must be provided. �If applicable, evidence that the Offeror is authorized by the original provider to provide the item(s) in the quotation should be included. 3). Acceptance of RFQ terms and conditions: This is an open-market solicitation for equipment as defined herein.� The Government intends to award a Purchase Order as a result of this solicitation that will include the clauses set forth herein.� The quotation should include one of the following statements: �The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition.� OR �The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) Note: This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC).� If an offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price.� However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the offeror�s FSS or GWAC contract, and the statement required above shall be included in the quotation. 4). The Dun and Bradstreet Number (DUNS number) for the quoter�s active System for Award Management (SAM) registration. Quoters must have an active registration at www.SAM.Gov to receive an award. 5). Quoters shall include a completed copy of the below provisions, �Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Any Federal Law (Class Deviation) (March 2015)� and �Free Trade Agreements Certificate� with their quotation. FAR 52.212-2, EVALUATION - COMMERCIAL ITEMS (Oct 2014) The specific evaluation criteria to be included in paragraph (a) of that provision are as follows: The Government intends to award a single purchase order (PO) from this solicitation utilizing simplified acquisitions procedures in accordance with FAR part 13. The Government reserves the right not to award a PO and to make an award without discussions based solely upon initial quotes. EVALUATION CRITERIA: An award shall be made to the offeror whose quotation is deemed to be the best value to the Government. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Capability and 2) Price. 1. Technical Capability:� Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all technical specifications. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award.� If an offeror does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not. 2.� Price:� Price will be evaluated for reasonableness.� A price realism analysis will not be conducted. PROVISIONS AND CLAUSES: The following provisions and clauses apply to this acquisition. Those incorporated by reference may be found at the following: All Federal Acquisition Regulation (FAR) clauses may be viewed at: https://www.acquisition.gov/browse/index/far . All Commerce Acquisition Regulation (CAR) clauses and provisions can be accessed at: https://www.acquisition.gov/car . Provisions In accordance with FAR 52.204-7, the awardee must be registered in the system for award management (www.sam.gov) prior to award.� Refusal to register shall forfeit award. * 52.204-13 -- System for Award Management Maintenance (Oct 2018) 52.204-18 -- Commercial and Government Entity Code Maintenance (Aug 2020) � 52.204-16 -- Commercial and Entity Code Reporting (Aug 2020) ��(a)�Definition.�As used in this provision � ��Commercial and Government Entity (CAGE) code�means� ��(1)�An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity by unique location; or ��(2)�An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code. ��(b)�The Offeror shall provide its CAGE code with its offer with its name and location address or otherwise include it prominently in its proposal. The CAGE code must be for that name and location address. Insert the word ""CAGE"" before the number. The CAGE code is required prior to award. ��(c)�CAGE codes may be obtained via� ��(1)�Registration in the System for Award Management (SAM) at�www.sam.gov. If the Offeror is located in the United States or its outlying areas and does not already have a CAGE code assigned, the DLA Commercial and Government Entity (CAGE) Branch will assign a CAGE code as a part of the SAM registration process. SAM registrants located outside the United States and its outlying areas shall obtain a NCAGE code prior to registration in SAM (see paragraph (c)(3) of this provision). ��(2)�The DLA Contractor and Government Entity (CAGE) Branch.�If registration in SAM is not required for the subject procurement, and the Offeror does not otherwise register in SAM, an Offeror located in the United States or its outlying areas may request that a CAGE code be assigned by submitting a request at�https://cage.dla.mil. ��(3)�The appropriate country codification bureau. Entities located outside the United States and its outlying areas may obtain an NCAGE code by contacting the Codification Bureau in the foreign entity's country if that country is a member of NATO or a sponsored nation. NCAGE codes may be obtained from the NSPA at�https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx�if the foreign entity�s country is not a member of NATO or a sponsored nation. Points of contact for codification bureaus, as well as additional information on obtaining NCAGE codes, are available at�http://www.nato.int/structur/AC/135/main/links/contacts.htm. ��(d)�Additional guidance for establishing and maintaining CAGE codes is available at�https://cage.dla.mil. ��(e)�When a CAGE code is required for the immediate owner and/or the highest-level owner by Federal Acquisition Regulation (FAR)�52.204-17�or�52.212-3(p), the Offeror shall obtain the respective CAGE code from that entity to supply the CAGE code to the Government. ��(f)�Do not delay submission of the offer pending receipt of a CAGE code. ��(g)�If the solicitation includes FAR clause�52.204-2, Security Requirements, a subcontractor requiring access to classified information under a contract shall be identified with a CAGE code on the DD Form 254. The Contractor shall require a subcontractor requiring access to classified information to provide its CAGE code with its name and location address or otherwise include it prominently in the proposal. Each location of subcontractor performance listed on the DD Form 254 is required to reflect a corresponding unique CAGE code for each listed location unless the work is being performed at a Government facility, in which case the agency location code shall be used. The CAGE code must be for that name and location address. Insert the word ""CAGE"" before the number. The CAGE code is required prior to award. (End of provision) 52.212-3 Offeror Representations and Certifications -- Commercial Items (Feb 2021) The Offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www/sam/gov .� If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.� 52.225-1, Buy American-SUPPLIES (JAN 2021) CLAUSES: 52.204-13 � System for Award Management Maintenance. (Oct 2018)�� 52.212-4 � Contract Terms and Conditions-Commercial Items (Oct 2018)� 52.232-40 � Providing Accelerated Payments to Small Business Subcontractors (Dec 2013) 52.212-5 � Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. (Jan 2021) -52.204-10 � Clause Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) -52.209-6 � Protecting the Government�s interest When Subcontracting with Contractor�s Debarred, Suspended, or Proposed for Debarment (Jun 2020) (31 U.S.C. 6101 note). -52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637 (d) (2) and (3))� �� -52.219-28 � Post Award Small Business Program Representation (Nov 2020) (15 U.S.C. 632(a)(2)).� �� -(ii) Alternate I (Mar 2020) of 52.219-28 -52.222-3, Convict Labor (Jun 2002) (E.O. 11755). -52.222-19, Child Labor�Cooperation with Authorities and Remedies (Jan 2020) (E.O 13126). -52.222-21, Prohibition of Segregated Facilities (Apr 2015) -52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246) -52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212) -52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793) -52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212)�� -52.222-50, Combatting Trafficking in Persons (Oct 2020) (22 U.S.C. chapter 78 and E.O. 13627) -52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Jun 2020)(E.O.13513) -52.225-1, Buy American-Supplies (JAN 2021) -52.225-2, Buy American Certificate (FEB 2021) -52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act--Alternate II (JAN 2021) ��-52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553)�� -52.233-4, Applicable Law for Breach of Contract Claim�� -52.232-33, Payment by Electronic Funds Transfer � System for Award Management (Oct 2018) (31 U.S.C. 3332) � (End of clause) �� The following provisions and clauses apply to this acquisition and are hereby incorporated by reference.� All CAR clauses may be viewed at https://www.acquisition.gov/car � 1352.213-70 � Evaluation Utilizing Simplified Acquisition Procedures The Government will issue an order resulting from this request for quotation to the responsible offeror whose quotation results in the best value to the Government, considering both price and non-price factors.� The following factors will be used to evaluate quotations: �� Technical and Price (for reasonableness) sections is to be tailored to conform to individual procurements.� Text is provided as an example only.� Stating relative importance of the evaluation factors is not required.� �� (1) Personnel Qualifications.� The experience, education, and qualifications of personnel proposed to work on the contract will be evaluated to determine their ability to perform their proposed duties.� �� (2) Technical Approach and Capability.� The offeror�s approach to performing contract requirements and its capability to successfully perform the contract will be evaluated.� �� (3) Past Performance.� The Offeror�s past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery and goods and services, cost management, communications between contracting parties, proactive management, and customer satisfaction.� �� (4) Price.� (End of clause) 1352.201-70 � Contracting Officers Authority (Apr 2010) 1352.209-73 � Compliance with the Laws (Apr 2010) 1352.233-70 � Agency Protests (Apr 2010) 1352.233-71 � GAO and Court of Federal Claims Protest (Apr 2010)� 1352.209-74 � Organizational Conflict of Interest�� 1352.246-70 � Place of Acceptance �� (a) The Contracting Officer or the duly authorized representative will accept supplies and services to be provided under this contract. �� (b) The place of acceptance will be: �� NIST: Shipping/Receiving �� 325 Broadway �� Boulder, CO 80305 1352.237-71 -- Security Processing Requirements � Low Risk Contracts (Apr 2010) �� (a) Investigative Requirements for Low Risk Contracts.� All contractor (and subcontractor) personnel proposed to be employed under a low risk contract shall undergo security processing by the Department�s Office of Security before being eligible to work on the premises of any Department of Commerce owned, leased, or controlled facility in the United States or overseas, or to obtain access to a Department of Commerce IT system.� All Department of Commerce security processing pertinent to this contract will be conducted at no cost to the contractor.� �� (b) Investigative requirements for Non-IT Service contracts are:� �� (1) Contracts more than 180 days � National Agency Check and Inquiries (NACI) �� NIST LOCAL�-39 Marking/Packing Instructions �� (1) if the total contract/order includes multiple quantities of the same of like item(s), segregated as separate CLIN/Item Numbers, deliverables shall be packed accordingly. Each individual package/container in the shipment shall include deliverables on a per-CLIN or Item basis. �� (2) For each shipment made under this contract/order, the Contractor shall furnish itemized packing list(s), enumerating the specific contents of each shipping container and what specific individual components constitute a full and complete ""unit"" for each bid item. The packing list shall include the brief description of each item found in the Schedule. If more than one container is required for each unit, each container should be marked accordingly, e.g., ""Box 1 of 2,"" ""Box 2 of 2,"" and the boxes, where feasible, should be taped or shrink-wrapped together as an issuable unit. �� (3) The contract number AND CONTRACT LINE ITEM NUMBER (CLIN) OR ORDER ITEM NUMBER shall be placed on the exterior of all containers. (End of Clause) NIST LOCAL--54 Electronic Billing Instructions NIST requires that Invoice/Voucher submissions are sent electronically via email to INVOICE@NIST.GOV . Each Invoice or Voucher submitted shall include the following: �(1) Contract number. �(2) Contractor name and address. �(3) Unique entity identifier (see www.sam.gov for the designated entity for establishing unique ��entity identifiers). �(4) Date of invoice. �(5) Invoice number. �(6) Amount of invoice and cumulative amount invoiced to-date. �(7) Contract Line Item Number (CLIN). �(8) Description, quantity, unit of measure, unit price, and extended price of supplies/services �� delivered. �(9) Prompt payment discount terms, if offered; and �(10) Any other information or documentation required by the contract.
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/ce9a363703db42c68c7b399e6b462d6d/view)
Place of Performance: Address: Boulder, CO 80305, USA; Zip Code: 80305; Country: USA
Record: SN06093982-F 20210813/210811230123 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

66 -- Thermo-Reflectance Imaging System