SPECIAL NOTICE
66 -- USNH Okinawa requirement for 1 Abbott analyzer, laboratory, immunoassay, chemiluminescent
- Notice Date
- 8/13/2021 7:36:06 AM
- Notice Type
- Special Notice
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- NAVAL MEDICAL LOGISTICS COMMAND FORT DETRICK MD 21702-9203 USA
- ZIP Code
- 21702-9203
- Solicitation Number
- N6264521RC97001
- Response Due
- 8/28/2021 10:00:00 AM
- Archive Date
- 09/12/2021
- Point of Contact
- Philmore Crichlow
- E-Mail Address
-
philmore.h.crichlow.civ@mail.mil
(philmore.h.crichlow.civ@mail.mil)
- Description
- DEPARTMENT OF THE NAVY NAVAL MEDICAL LOGISTICS COMMAND ��� NOTICE OF INTENT The Naval Medical Logistics Command (NMLC) intends to negotiate on a sole source basis (FAR 13.106-1(b)(1)), soliciting from a single source.� The proposed source is Abbott Laboratories, Inc. of 200 Abbott Park Road, Abbott Park, IL. 60064 USA. The U.S. Pacific Command Armed Services Blood Bank Center (ASBBC) in Naval Hospital Okinawa has a requirement for one (1) analyzer, laboratory, immunoassay, chemiluminescent [17-916], quality control, maintenance, and technical support for U.S. Naval Hospital (USNH) Okinawa. The analyzer shall be capable of blood donor screening for anti-HBC, anti-HBsAg, anti-HIV 1/2, anti-HTLV I/II, anti-HCV, and Chagas. The analyzer shall be Food and Drug Administration (FDA) approved for each of the listed tests. Reagents shall not require staff preparation before use in the analyzer. The analyzer shall be capable of continuous loading of reagents and supplies. The analyzer shall be able to accommodate a minimum throughput of 600 tests per hour. The analyzer shall be capable of operating at 120 Volts Alternating Current (VAC), 60 Hz. The vendor shall provide two (2) operational and two (2) service manuals, each in English. The vendor shall provide Biomedical Equipment Technician (BMET) training for at least two (2) personnel. The vendor shall provide operator training for at least two (2) personnel. The vendor shall provide quality control, maintenance, and technical support as outlined in the Statement of Work (SOW) for a base year and up to four option periods. The system, including claims made for the product, shall be compliant with Food and Drug Administration (FDA) regulations, with respect to marketing and delivering medical products for use in the United States of America.� These requirements shall apply even if delivery is requested outside of the United States of America. The system shall be installed in compliance with the Occupational Safety and Health Administration (OSHA) requirements. Contractor shall be an Original Equipment Manufacturer (OEM) authorized dealer, authorized distributor, or authorized reseller for the proposed equipment/system such that OEM warranty and service are provided and maintained by the OEM.� All software licensing, warranty, and service associated with the equipment/system shall be in accordance with the OEM terms and conditions. Upon delivery, the contractor shall be responsible for uncrating the unit/system, transporting it through the facility to the location of intended use for installation, and removing of all trash created in this process. If interim storage is required, the vendor shall make arrangements for the storage. There are not set-aside restrictions for this requirement.� The intended procurement will be classified under North America Industry Classification System (NAICS) 334516.� This notice of intent is not a request for competitive proposals.� However, parties interested in responding to this notice will need to submit technical data sufficient to determine capability in providing the same product.� All capability statements received by the closing date of this synopsis will be considered by the Government.� A determination by the Government not to compete based on responses to this notice is solely within the discretion of the Government.� Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. If a vendor challenges the basis of this requirement, please email product capability statements (formats for submission: PDF, MS Word, or MS Excel) to Mr. Philmore Crichlow at �philmore.h.crichlow.civ@mail.mil.� Closing date for challenges is no later than 1:00 PM ET on 28 August �2021.� No phone calls will be accepted.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/73efbb6409f34da78148f1d59483290f/view)
- Place of Performance
- Address: JPN
- Country: JPN
- Country: JPN
- Record
- SN06096445-F 20210815/210813230115 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |