SOLICITATION NOTICE
66 -- 66--VENTURI METER
- Notice Date
- 8/17/2021 10:43:46 AM
- Notice Type
- Solicitation
- NAICS
- 334514
— Totalizing Fluid Meter and Counting Device Manufacturing
- Contracting Office
- NAVSUP WEAPON SYSTEMS SUPPORT MECH MECHANICSBURG PA 17050-0788 USA
- ZIP Code
- 17050-0788
- Solicitation Number
- N0010421QFD11
- Response Due
- 8/30/2021 12:00:00 AM
- Archive Date
- 09/14/2021
- Point of Contact
- Telephone: 7176051234
- E-Mail Address
-
SYLVIA.SENTZ@NAVY.MIL
(SYLVIA.SENTZ@NAVY.MIL)
- Description
- CONTACT INFORMATION|4|N743.45|WVE|717-605-3353|sylvia.sentz@navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|See specifications C and E.| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE - SHORT VERSION|8|x||x|||||| INSPECTION/ACCEPTANCE POINT|6||||||| TIME OF DELIVERY (JUNE 1997)|20|0001|2|365 days|||||||||||||||||| GENERAL INFORMATION-FOB-DESTINATION|1|B| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)|16|Stand-Alone Receiving Report - Certifications Combo-Receiving Report & Invoice - Material |n/a|tbd|N00104|tbd|N39040 - Certifications, S4306A - Material|N50286|tbd|133.2|n/a|n/a|S4306A - Material|n/a|n/a|see dd 1423|PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| EQUAL OPPORTUNITY (SEP 2016)|2||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|one year from date of delivery|one year from date of delivery||||| WARRANTY OF DATA--BASIC (MAR 2014)|2||| BUY AMERICAN --FREE TRADE AGREEMENTS--BALANCE OF PAYMENTS PROGRAM - BASIC(DEVIATION 2020-O0019) (JUL 2020))|3|||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2020)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE (DEVIATION 2020-O0019) (JUL 2020))|3|||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (NOV 2014)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2020)|13|334514|750|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||x| EVALUATION CRITERIA AND BASIS FOR AWARD-|1|| 1. This procurement is a Level I CASREP. 2. Data Item A001 (inspection and Test Plan) may be waived if already on fileat NAVSUP WSS Mech. 3. Drawings associated with this solicitation will be made available on the SAM.gov website but will be restricted access which needs to be approved.Once access has been requested, interested vendors should email the POC listedon the solicitation to inform them of the request. 4. NAVSUP WSS Mech will be considering past performance in the evaluation ofoffers. See Clause 252.213-7000. 5. All contractual documents (i.e. contracts, purchase orders, task orders,delivery orders, and modifications) related to the instant procurement areconsidered to be ""issued"" by the Government when copies are either depositedin the mail, transmitted by facsimile, or sent by other electronic commercemethods, such as email. The Government's acceptance of the contractor'sproposal constitutes bilateral agreement to ""issue"" contractual documents asdetailed here in. 6. The following proposed delivery schedule applies: Submission of all certification data CDRLS 20 days prior to delivery. PNSY review/acceptance of certification CDRLS 6 working days after receipt (330 actual days to manufacture part) Final delivery of material (365 days) Delivery days and past performance will be evaluation factors in determiningawardee. Early delivery is acceptable at no additional cost to the Government. 1. SCOPE 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material. 2. APPLICABLE DOCUMENTS 2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.2.1 Specification Revisions - The specification revisions listed under ""Documents References"" below are the preferred revision. Older and/or newer r evisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric Contractor Data Submission) at: ht tps://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification revisions when material is certified to newly released revisions,without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g. E2009, R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listedwithin CSD155 or elsewhere within this contract. 2.2.2 ""Document References"" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.2.3 Documents, drawings, and publications supplied are listed under ""Drawing Number"". These items should be retained until an award is made. DRAWING DATA=2620-063X01 |96169| Z| |D|0001 | Z|49998|1188959 DRAWING DATA=2620-063X01 |96169| Z| |D|0002 | K|49998|0055092 DRAWING DATA=2620-063X01 |96169| Z| |D|0002.1 | U|49998|0051784 DRAWING DATA=2620-063X01 |96169| Z| |D|0002.2 | Z|49998|0041964 DRAWING DATA=2620-063X01 |96169| Z| |D|0003 | Z|49998|0050739 DRAWING DATA=2620-063X01 |96169| Z| |D|0003.1 | Y|49998|0061088 DRAWING DATA=2620-063X01 |96169| Z| |D|0004 | E|49998|0025743 DRAWING DATA=2620-063X01 |96169| Z| |D|0005 | V|49998|0034080 DRAWING DATA=2620-063X01 |96169| Z| |D|0006 | E|49998|0024816 DRAWING DATA=2620-063X01 |96169| Z| |D|0007 | T|49998|0023186 DRAWING DATA=2620-063X01 |96169| Z| |D|0008 | Z|49998|0031671 DRAWING DATA=2620-063X01 |96169| Z| |D|0009 | E|49998|0013277 DRAWING DATA=2620-063X01 |96169| Z| |D|0010 | G|49998|0052230 DRAWING DATA=2620-063X01 |96169| Z| |D|0011 | V|49998|0026855 DRAWING DATA=2620-063X01 |96169| Z| |D|0012 | L|49998|0019598 DRAWING DATA=2620-063X01 |96169| Z| |D|0014 | N|49998|0023569 DRAWING DATA=2620-063X01 |96169| Z| |D|0015 | N|49998|0026756 DRAWING DATA=2620-063X01 |96169| Z| |D|0016 | Y|49998|0040392 DRAWING DATA=2620-063X01 |96169| Z| |D|0017 | W|49998|0026167 DRAWING DATA=2620-063X01 |96169| Z| |D|0019 | S|49998|0043231 DRAWING DATA=2620-063X01 |96169| Z| |D|0020 | R|49998|0027157 DRAWING DATA=2621-625-03 |96169|AL| |D|0001 |AL|49998|0110011 DRAWING DATA=2621-625-03 |96169|AL| |D|0001.1.1 | R|49998|0105307 DRAWING DATA=2621-625-03 |96169|AL| |D|0002 | F|49998|0087449 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.1 | N|49998|0107282 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.2 | S|49998|0079553 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.3 | V|49998|0078581 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.4 |AC|49998|0088927 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.5 |AK|49998|0088342 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.6 |AL|49998|0027433 DRAWING DATA=2621-625-03 |96169|AL| |D|0003 |AL|49998|0133653 DRAWING DATA=2621-625-03 |96169|AL| |D|0003.1 |AC|49998|0102806 DRAWING DATA=2621-625-03 |96169|AL| |D|0003.2 |AH|49998|0083381 DRAWING DATA=2621-625-03 |96169|AL| |D|0003.3 |AL|49998|0062196 DRAWING DATA=2621-625-03 |96169|AL| |D|0004 | T|49998|0036989 DRAWING DATA=2621-625-03 |96169|AL| |D|0005 |AL|49998|0060702 DRAWING DATA=2621-625-03 |96169|AL| |D|0005.1 |AK|49998|0071041 DRAWING DATA=2621-625-03 |96169|AL| |D|0006 | S|49998|0041574 DRAWING DATA=2621-625-03 |96169|AL| |D|0007 | S|49998|0042477 DRAWING DATA=2621-625-03 |96169|AL| |D|0008 |AJ|49998|0040172 DRAWING DATA=2621-625-03 |96169|AL| |D|0009 | S|49998|0036836 DRAWING DATA=2621-625-03 |96169|AL| |D|0010 | S|49998|0038141 DRAWING DATA=2621-625-03 |96169|AL| |D|0011 | S|49998|0037232 DRAWING DATA=2621-625-03 |96169|AL| |D|0012 | S|49998|0040562 DRAWING DATA=2621-625-03 |96169|AL| |D|0013 | S|49998|0034249 DRAWING DATA=2621-625-03 |96169|AL| |D|0014 | S|49998|0036960 DRAWING DATA=2621-625-03 |96169|AL| |D|0015 |AC|49998|0036326 DRAWING DATA=2621-625-03 |96169|AL| |D|0016 | S|49998|0037485 DRAWING DATA=2621-625-03 |96169|AL| |D|0017 | S|49998|0080682 DRAWING DATA=2621-625-03 |96169|AL| |D|0018 | S|49998|0058706 DRAWING DATA=2621-625-03 |96169|AL| |D|0019 | S|49998|0065643 DRAWING DATA=2621-625-03 |96169|AL| |D|0020 |AC|49998|0065400 DRAWING DATA=2621-625-03 |96169|AL| |D|0021 |AC|49998|0065890 DRAWING DATA=2621-625-03 |96169|AL| |D|0022 | S|49998|0070546 DRAWING DATA=2621-625-03 |96169|AL| |D|0023 | S|49998|0077894 DRAWING DATA=2621-625-03 |96169|AL| |D|0024 |AC|49998|0061529 DRAWING DATA=2621-625-03 |96169|AL| |D|0025 | S|49998|0080991 DRAWING DATA=2621-625-03 |96169|AL| |D|0026 | S|49998|0078169 DRAWING DATA=2621-625-03 |96169|AL| |D|0027 | S|49998|0062079 DRAWING DATA=2621-625-03 |96169|AL| |D|0028 | S|49998|0063911 DRAWING DATA=2621-625-03 |96169|AL| |D|0029 | S|49998|0081357 DRAWING DATA=2621-625-03 |96169|AL| |D|0030 | S|49998|0078268 DRAWING DATA=2621-625-03 |96169|AL| |D|0031 | S|49998|0067988 DRAWING DATA=2621-625-03 |96169|AL| |D|0032 | S|49998|0052338 DRAWING DATA=2621-625-03 |96169|AL| |D|0033 | S|49998|0066347 DRAWING DATA=2621-625-03 |96169|AL| |D|0034 | S|49998|0076897 DRAWING DATA=2621-625-03 |96169|AL| |D|0035 |AC|49998|0117817 DRAWING DATA=2621-625-03 |96169|AL| |D|0036 | S|49998|0070990 DRAWING DATA=2621-625-03 |96169|AL| |D|0037 | S|49998|0075571 DRAWING DATA=2621-625-03 |96169|AL| |D|0038 | S|49998|0069120 DRAWING DATA=2621-625-03 |96169|AL| |D|0039 | S|49998|0075078 DRAWING DATA=2621-625-03 |96169|AL| |D|0040 | S|49998|0100110 DRAWING DATA=2621-625-03 |96169|AL| |D|0041 | S|49998|0097068 DRAWING DATA=2621-625-03 |96169|AL| |D|0042 | S|49998|0077580 DRAWING DATA=2621-625-03 |96169|AL| |D|0043 | S|49998|0071220 DRAWING DATA=2621-625-03 |96169|AL| |D|0044 |AC|49998|0073502 DRAWING DATA=2621-625-03 |96169|AL| |D|0045 | S|49998|0071561 DRAWING DATA=2621-625-03 |96169|AL| |D|0046 |AC|49998|0053564 DRAWING DATA=2621-625-03 |96169|AL| |D|0047 |AC|49998|0088878 DRAWING DATA=2621-625-03 |96169|AL| |D|0048 | S|49998|0080796 DRAWING DATA=2621-625-03 |96169|AL| |D|0049 | Z|49998|0106263 DRAWING DATA=2621-625-03 |96169|AL| |D|0050 | S|49998|0088279 DRAWING DATA=2621-625-03 |96169|AL| |D|0051 | S|49998|0089976 DRAWING DATA=2621-625-03 |96169|AL| |D|0052 | S|49998|0067306 DRAWING DATA=2621-625-03 |96169|AL| |D|0053 | S|49998|0065072 DRAWING DATA=2621-625-03 |96169|AL| |D|0054 | S|49998|0071895 DRAWING DATA=2621-625-03 |96169|AL| |D|0055 | L|49998|0060798 DRAWING DATA=2621-625-03 |96169|AL| |D|0056 | L|49998|0060631 DRAWING DATA=2621-625-03 |96169|AL| |D|0057 |AC|49998|0087017 DRAWING DATA=2621-625-03 |96169|AL| |D|0058 | S|49998|0079014 DRAWING DATA=2621-625-03 |96169|AL| |D|0059 | S|49998|0087182 DRAWING DATA=2621-625-03 |96169|AL| |D|0060 | S|49998|0080044 DRAWING DATA=2621-625-03 |96169|AL| |D|0061 | S|49998|0088606 DRAWING DATA=2621-625-03 |96169|AL| |D|0062 | S|49998|0082165 DRAWING DATA=2621-625-03 |96169|AL| |D|0063 | M|49998|0070993 DRAWING DATA=2621-625-03 |96169|AL| |D|0064 | M|49998|0067453 DRAWING DATA=2621-625-03 |96169|AL| |D|0065 | M|49998|0067192 DRAWING DATA=2621-625-03 |96169|AL| |D|0066 | S|49998|0070847 DRAWING DATA=2621-625-03 |96169|AL| |D|0067 | W|49998|0079068 DRAWING DATA=2621-625-03 |96169|AL| |D|0069 | S|49998|0078860 DRAWING DATA=2621-625-03 |96169|AL| |D|0070 | S|49998|0067697 DRAWING DATA=2621-625-03 |96169|AL| |D|0071 | W|49998|0075516 DRAWING DATA=2621-625-03 |96169|AL| |D|0072 | S|49998|0121919 DRAWING DATA=2621-625-03 |96169|AL| |D|0073 | N|49998|0063130 DRAWING DATA=2621-625-03 |96169|AL| |D|0074 |AC|49998|0088058 DRAWING DATA=2621-625-03 |96169|AL| |D|0075 | S|49998|0091225 DRAWING DATA=2621-625-03 |96169|AL| |D|0076 | S|49998|0084931 DRAWING DATA=2621-625-03 |96169|AL| |D|0077 | S|49998|0080448 DRAWING DATA=2621-625-03 |96169|AL| |D|0078 | S|49998|0088423 DRAWING DATA=2621-625-03 |96169|AL| |D|0079 | S|49998|0097630 DRAWING DATA=2621-625-03 |96169|AL| |D|0080 | S|49998|0102812 DRAWING DATA=2621-625-03 |96169|AL| |D|0081 | S|49998|0089089 DRAWING DATA=2621-625-03 |96169|AL| |D|0082 | S|49998|0091204 DRAWING DATA=2621-625-03 |96169|AL| |D|0083 | S|49998|0093758 DRAWING DATA=2621-625-03 |96169|AL| |D|0084 | S|49998|0074452 DRAWING DATA=2621-625-03 |96169|AL| |D|0085 | S|49998|0101412 DRAWING DATA=2621-625-03 |96169|AL| |D|0086 | S|49998|0124627 DRAWING DATA=2621-625-03 |96169|AL| |D|0087 | S|49998|0089362 DRAWING DATA=2621-625-03 |96169|AL| |D|0088 | S|49998|0125925 DRAWING DATA=2621-625-03 |96169|AL| |D|0089 | T|49998|0138119 DRAWING DATA=2621-625-03 |96169|AL| |D|0090 | S|49998|0172266 DRAWING DATA=2621-625-03 |96169|AL| |D|0091 | S|49998|0087770 DRAWING DATA=2621-625-03 |96169|AL| |D|0092 | S|49998|0082515 DRAWING DATA=2621-625-03 |96169|AL| |D|0093 | S|49998|0083019 DRAWING DATA=2621-625-03 |96169|AL| |D|0094 | S|49998|0082380 DRAWING DATA=2621-625-03 |96169|AL| |D|0095 | S|49998|0086506 DRAWING DATA=2621-625-03 |96169|AL| |D|0096 | S|49998|0125829 DRAWING DATA=2621-625-03 |96169|AL| |D|0097 | S|49998|0108393 DRAWING DATA=2621-625-03 |96169|AL| |D|0098 | T|49998|0065762 DRAWING DATA=2621-625-03 |96169|AL| |D|0100 | T|49998|0070894 DRAWING DATA=2621-625-03 |96169|AL| |D|0101 | T|49998|0071718 DRAWING DATA=2621-625-03 |96169|AL| |D|0102 | T|49998|0071097 DRAWING DATA=2621-625-03 |96169|AL| |D|0103 | T|49998|0090824 DRAWING DATA=2621-625-03 |96169|AL| |D|0104 | T|49998|0090404 DRAWING DATA=2621-625-03 |96169|AL| |D|0105 | T|49998|0076361 DRAWING DATA=2621-625-03 |96169|AL| |D|0106 | U|49998|0082997 DRAWING DATA=2621-625-03 |96169|AL| |D|0107 | U|49998|0091013 DRAWING DATA=2621-625-03 |96169|AL| |D|0108 | T|49998|0137512 DRAWING DATA=2621-625-03 |96169|AL| |D|0109 | U|49998|0086586 DRAWING DATA=2621-625-03 |96169|AL| |D|0110 | V|49998|0136029 DRAWING DATA=2621-625-03 |96169|AL| |D|0111 | V|49998|0123395 DRAWING DATA=2621-625-03 |96169|AL| |D|0112 | V|49998|0072126 DRAWING DATA=2621-625-03 |96169|AL| |D|0113 | V|49998|0071344 DRAWING DATA=2621-625-03 |96169|AL| |D|0114 | V|49998|0069795 DRAWING DATA=2621-625-03 |96169|AL| |D|0115 | V|49998|0073173 DRAWING DATA=2621-625-03 |96169|AL| |D|0117 | V|49998|0071456 DRAWING DATA=2621-625-03 |96169|AL| |D|0118 | V|49998|0077864 DRAWING DATA=2621-625-03 |96169|AL| |D|0119 | V|49998|0073056 DRAWING DATA=2621-625-03 |96169|AL| |D|0120 | V|49998|0094572 DRAWING DATA=2621-625-03 |96169|AL| |D|0121 | V|49998|0076429 DRAWING DATA=2621-625-03 |96169|AL| |D|0122 | V|49998|0109802 DRAWING DATA=2621-625-03 |96169|AL| |D|0123 | V|49998|0072693 DRAWING DATA=2621-625-03 |96169|AL| |D|0124 | V|49998|0060600 DRAWING DATA=2621-625-03 |96169|AL| |D|0125 | W|49998|0063434 DRAWING DATA=2621-625-03 |96169|AL| |D|0126 |AA|49998|0073173 DRAWING DATA=2621-625-03 |96169|AL| |D|0127 | W|49998|0064212 DRAWING DATA=2621-625-03 |96169|AL| |D|0128 | W|49998|0063746 DRAWING DATA=2621-625-03 |96169|AL| |D|0129 | W|49998|0071249 DRAWING DATA=2621-625-03 |96169|AL| |D|0130 | W|49998|0082521 DRAWING DATA=2621-625-03 |96169|AL| |D|0132 | W|49998|0077575 DRAWING DATA=2621-625-03 |96169|AL| |D|0133 | Y|49998|0063434 DRAWING DATA=2621-625-03 |96169|AL| |D|0134 | Y|49998|0078666 DRAWING DATA=2621-625-03 |96169|AL| |D|0135 |AC|49998|0091986 DRAWING DATA=2621-625-03 |96169|AL| |D|0136 | Y|49998|0080972 DRAWING DATA=2621-625-03 |96169|AL| |D|0137 | Y|49998|0082349 DRAWING DATA=2621-625-03 |96169|AL| |D|0138 | Y|49998|0078670 DRAWING DATA=2621-625-03 |96169|AL| |D|0139 | Y|49998|0068212 DRAWING DATA=2621-625-03 |96169|AL| |D|0140 | Y|49998|0062850 DRAWING DATA=2621-625-03 |96169|AL| |D|0141 | Z|49998|0067637 DRAWING DATA=2621-625-03 |96169|AL| |D|0142 | Z|49998|0101793 DRAWING DATA=2621-625-03 |96169|AL| |D|0143 | Z|49998|0102035 DRAWING DATA=2621-625-03 |96169|AL| |D|0144 | Z|49998|0062060 DRAWING DATA=2621-625-03 |96169|AL| |D|0145 |AA|49998|0059438 DRAWING DATA=2621-625-03 |96169|AL| |D|0146 |AA|49998|0064093 DRAWING DATA=2621-625-03 |96169|AL| |D|0147 |AA|49998|0062043 DRAWING DATA=2621-625-03 |96169|AL| |D|0148 |AA|49998|0067228 DRAWING DATA=2621-625-03 |96169|AL| |D|0149 |AB|49998|0075074 DRAWING DATA=2621-625-03 |96169|AL| |D|0150 |AB|49998|0081824 DRAWING DATA=2621-625-03 |96169|AL| |D|0151 |AC|49998|0081539 DRAWING DATA=2621-625-03 |96169|AL| |D|0152 |AB|49998|0066724 DRAWING DATA=2621-625-03 |96169|AL| |D|0153 |AB|49998|0063072 DRAWING DATA=2621-625-03 |96169|AL| |D|0156 |AD|49998|0070574 DRAWING DATA=2621-625-03 |96169|AL| |D|0157 |AE|49998|0077520 DRAWING DATA=2621-625-03 |96169|AL| |D|0158 |AE|49998|0072166 DRAWING DATA=2621-625-03 |96169|AL| |D|0159 |AF|49998|0077054 DRAWING DATA=2621-625-03 |96169|AL| |D|0160 |AF|49998|0069001 DRAWING DATA=2621-625-03 |96169|AL| |D|0161 |AF|49998|0072044 DRAWING DATA=2621-625-03 |96169|AL| |D|0162 |AF|49998|0069580 DRAWING DATA=2621-625-03 |96169|AL| |D|0163 |AF|49998|0062209 DRAWING DATA=2621-625-03 |96169|AL| |D|0164 |AG|49998|0065301 DRAWING DATA=2621-625-03 |96169|AL| |D|0165 |AG|49998|0075974 DRAWING DATA=2621-625-03 |96169|AL| |D|0167 |AH|49998|0058799 DRAWING DATA=2621-625-03 |96169|AL| |D|0168 |AH|49998|0072714 DRAWING DATA=2621-625-03 |96169|AL| |D|0169 |AH|49998|0075954 DRAWING DATA=2621-625-03 |96169|AL| |D|0170 |AH|49998|0027555 DRAWING DATA=2621-625-03 |96169|AL| |D|0172 |AJ|49998|0032592 DRAWING DATA=2621-625-03 |96169|AL| |D|0173 |AJ|49998|0035233 DRAWING DATA=2621-625-03 |96169|AL| |D|0174 |AJ|49998|0036435 DRAWING DATA=2621-625-03 |96169|AL| |D|0175 |AL|49998|0034587 DRAWING DATA=2621-625-03 |96169|AL| |D|0176 |AL|49998|0031758 DRAWING DATA=2621-625-03 |96169|AL| |D|0177 |AL|49998|0032520 DRAWING DATA=2621-625-03 |96169|AL| |D|0178 |AL|49998|0032671 DRAWING DATA=2621-625-03 |96169|AL| |D|0179 |AL|49998|0037460 DRAWING DATA=2621-625-03 |96169|AL| |D|0180 |AL|49998|0036663 DRAWING DATA=2621-625-03 |96169|AL| |D|0181 |AL|49998|0036941 DRAWING DATA=2621-625-03 |96169|AL| |D|0182 |AL|49998|0037691 DRAWING DATA=2621-625-03 |96169|AL| |D|0185 |AK|49998|0034494 DRAWING DATA=2621-625-03 |96169|AL| |D|0186 |AL|49998|0040759 DRAWING DATA=2621-625-03 |96169|AL| |D|0187 |AL|49998|0033485 DRAWING DATA=2621-625-03 |96169|AL| |D|0188 |AL|49998|0037555 DRAWING DATA=2621-625-03 |96169|AL| |D|0189 |AL|49998|0048190 DRAWING DATA=2621-625-03 |96169|AL| |D|0190 |AL|49998|0032497 DRAWING DATA=2621-826-01 |96169| L| |D|0001 | L|49998|0056754 DRAWING DATA=2621-826-01 |96169| L| |D|0001.1 | K|49998|0087603 DRAWING DATA=2621-826-01 |96169| L| |D|0001.2 | F|49998|0048315 DRAWING DATA=2621-826-01 |96169| L| |D|0001.3 | K|49998|0040831 DRAWING DATA=2621-826-01 |96169| L| |D|0002 | J|49998|0115015 DRAWING DATA=2621-826-01 |96169| L| |D|0002.1 | L|49998|0078365 DRAWING DATA=2621-826-01 |96169| L| |D|0003 | L|49998|0095443 DRAWING DATA=2621-826-01 |96169| L| |D|0003.1 | L|49998|0061346 DRAWING DATA=2621-826-01 |96169| L| |D|0004 | J|49998|0049359 DRAWING DATA=2621-826-01 |96169| L| |D|0004.1 | J|49998|0055857 DRAWING DATA=2621-826-01 |96169| L| |D|0004.2 | G|49998|0056977 DRAWING DATA=2621-826-01 |96169| L| |D|0005 | G|49998|0045921 DRAWING DATA=2621-826-01 |96169| L| |D|0005.1 | J|49998|0051959 DRAWING DATA=2621-826-01 |96169| L| |D|0005.2 | J|49998|0026953 DRAWING DATA=2621-826-01 |96169| L| |D|0006 | J|49998|0039854 DRAWING DATA=2621-826-01 |96169| L| |D|0006.1 | J|49998|0049544 DRAWING DATA=2621-826-01 |96169| L| |D|0007 | J|49998|0055631 DRAWING DATA=2621-826-01 |96169| L| |D|0007.1 | J|49998|0043854 DRAWING DATA=2621-826-01 |96169| L| |D|0008 | L|49998|0057162 DRAWING DATA=2621-826-01 |96169| L| |D|0009 | J|49998|0038265 DRAWING DATA=2621-826-01 |96169| L| |D|0009.1 | J|49998|0046414 DRAWING DATA=2621-826-01 |96169| L| |D|0010 | J|49998|0055882 DRAWING DATA=2621-826-01 |96169| L| |D|0011 | J|49998|0038680 DRAWING DATA=2621-826-01 |96169| L| |D|0011.1 | J|49998|0048318 DRAWING DATA=2621-826-01 |96169| L| |D|0012 | J|49998|0054340 DRAWING DATA=2621-826-01 |96169| L| |D|0013 | -|49998|0042497 DRAWING DATA=2621-826-01 |96169| L| |D|0014 | J|49998|0041679 DRAWING DATA=2621-826-01 |96169| L| |D|0014.1 | J|49998|0045464 DRAWING DATA=2621-826-01 |96169| L| |D|0015 | J|49998|0065125 DRAWING DATA=2621-826-01 |96169| L| |D|0016 | J|49998|0050107 DRAWING DATA=2621-826-01 |96169| L| |D|0017 | J|49998|0056740 DRAWING DATA=2621-826-01 |96169| L| |D|0020 | J|49998|0039272 DRAWING DATA=2621-826-01 |96169| L| |D|0020.1 | J|49998|0052709 DRAWING DATA=2621-826-01 |96169| L| |D|0021 | J|49998|0051755 DRAWING DATA=2621-826-01 |96169| L| |D|0022 | J|49998|0050796 DRAWING DATA=2621-826-01 |96169| L| |D|0023 | J|49998|0055526 DRAWING DATA=2621-826-01 |96169| L| |D|0024 | J|49998|0051328 DRAWING DATA=2621-826-01 |96169| L| |D|0025 | J|49998|0051540 DRAWING DATA=2621-826-01 |96169| L| |D|0026 | J|49998|0051775 DRAWING DATA=2621-826-01 |96169| L| |D|0027 | J|49998|0051245 DRAWING DATA=2621-826-01 |96169| L| |D|0028 | J|49998|0051640 DRAWING DATA=2621-826-01 |96169| L| |D|0029 | J|49998|0051471 DRAWING DATA=2621-826-01 |96169| L| |D|0030 | J|49998|0052425 DRAWING DATA=2621-826-01 |96169| L| |D|0031 | J|49998|0053087 DRAWING DATA=2621-826-01 |96169| L| |D|0032 | J|49998|0052840 DRAWING DATA=2621-826-01 |96169| L| |D|0033 | J|49998|0053676 DRAWING DATA=2621-826-01 |96169| L| |D|0034 | J|49998|0041353 DRAWING DATA=2621-826-01 |96169| L| |D|0034.1 | J|49998|0054701 DRAWING DATA=2621-826-01 |96169| L| |D|0035 | J|49998|0045398 DRAWING DATA=2621-826-01 |96169| L| |D|0035.1 | J|49998|0041062 DRAWING DATA=2621-826-01 |96169| L| |D|0036 | J|49998|0039718 DRAWING DATA=2621-826-01 |96169| L| |D|0036.1 | J|49998|0054579 DRAWING DATA=2621-826-01 |96169| L| |D|0037 | J|49998|0050272 DRAWING DATA=2621-826-01 |96169| L| |D|0038 | J|49998|0040014 DRAWING DATA=2621-826-01 |96169| L| |D|0038.1 | J|49998|0056214 DRAWING DATA=2621-826-01 |96169| L| |D|0039 | J|49998|0055923 DRAWING DATA=2621-826-01 |96169| L| |D|0040 | J|49998|0066638 DRAWING DATA=2621-826-01 |96169| L| |D|0041 | K|49998|0037606 DRAWING DATA=2621-826-01 |96169| L| |D|0041.1 | K|49998|0051430 DRAWING DATA=2621-826-01 |96169| L| |D|0042 | K|49998|0043620 DRAWING DATA=2621-826-01 |96169| L| |D|0043 | L|49998|0041012 DRAWING DATA=2621-826-01 |96169| L| |D|0043.1 | L|49998|0037785 DRAWING DATA=2621-826-01 |96169| L| |D|0043.2 | L|49998|0037958 DRAWING DATA=2621-826-01 |96169| L| |D|0044 | L|49998|0046862 DRAWING DATA=2621-826-01 |96169| L| |D|0044.1 | L|49998|0041040 DOCUMENT REF DATA=FED-STD-H28 | | |B |190426|A| | | DOCUMENT REF DATA=FED-STD-H28 |0020| |B |941221|A| |01| DOCUMENT REF DATA=ANSI/ASQ Z1.4 | | | |080101|A| | | DOCUMENT REF DATA=QQ-N-281 | | |D |851023|A|2 | | DOCUMENT REF DATA=ASTM-B369 | | | |200401|A| | | DOCUMENT REF DATA=MIL-STD-792 | | |F |060519|A| | | DOCUMENT REF DATA=SAE AMS 5520 | | |E |980401|A| | | DOCUMENT REF DATA=ISO_9001 | | | |081115|A| | | DOCUMENT REF DATA=ISO10012 | | | |030415|A| | | DOCUMENT REF DATA=ISO/IEC 17025 | | | |050515|A| | | DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A|1 | | DOCUMENT REF DATA=MIL-STD-45662 | | |A |880801|A| | | DOCUMENT REF DATA=A-A-59004 | | |B |181118|A| | | DOCUMENT REF DATA=ANSI/NCSL Z540.3 | | | |130326|A| | | DOCUMENT REF DATA=S9074-AQ-GIB-010/248 | | |1 |191112|A| | | DOCUMENT REF DATA=T9074-AS-GIB-010/271 | | |1 |140911|A| | | DOCUMENT REF DATA=S9074-AR-GIB-010A/278 (CHG A) | | | |130214|A| | | 3. REQUIREMENTS 3.1 ;The Venturi Meter must be made in accordance with General Dynamics Electric Boat Division drawing 2621-826-01 Assembly 41A, except as amplified or modified herein.; 3.2 ;Retainer Ring from assembly 41A of drawing 2621-826-01 must be made from SAE AMS 5520; 3.3 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise: Part - ;Venturi body piece 42A of drawing 2621-826-01; Material - ;ASTM B369 UNS C96400; Part - ;Valve, venturi piece 8A of drawing 2621-826-01; Material - ;QQ-N-281 mechanical properties in accordance with Note 18 of drawing 2621-826-01; Part - ;Plug, hex head piece 7A of drawing 2621-625-03; Material - ;QQ-N-281 with mechanical properties in accordance with Note 16 of drawing 2621-625-03; 3.4 Testing Certification - Certifications are required for the following tests on the items listed below. Additional testing on other piece parts (if any) per applicable drawings is still required, but certifications are only required as listed below. Test - ;Hydrostatic Pressure Test; Item - ;Venturi body piece 42A; Performance - ;Note 9 of drawing 2621-826-01; Acceptance - ;Note 9 of drawing 2621-826-01; Test - Weldability Test of ASTM-B369 material Item - ;Venturi body piece 42A; Performance - ASTM-B369 Acceptance - ASTM-B369 Test - Dye Penetrant Inspection Part - Body Weld Ends in final machined condition including 1/2"" of base material Performance - T9074-AS-GIB-010/271 Acceptance - S9074-AR-GIB-010A/278 3.5 The pressure tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For pressure tests below 100 PSIG, the pressure tolerance must be +1 PSIG/-0PSIG. For pressure tests at or above 100 PSIG up to and including 2500 PSIG, the pressure tolerance must be +2% / -0 PSIG rounded off to the nearest multiple of thesmallest graduation on an analog test pressure gauge, not to exceed 50 PSIG. 30 minutes / - 0 minutes. above 2500 PSIG, the pressure tolerance must be +2%/-0 PSIG, rounded off to the nearest multiple of the smallest graduation on an analog test pressure gauge, not to exceed 200 PSIG. The pressure test time tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure test time tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For a test duration up to and including 1 hour, the tolerance must be +5 minutes / - 0 minutes. For a test duration of more than 1 hour up to and including 24 hours, the tolerance must be +30 minutes / - 0 minutes. For a test duration of more than 24 hours, the tolerance must be + 60 minutes/- 0 minutes. 3.6 Specification Change - For QQ-N-281, Class B material: 1 - Footnote 9 to Table II of QQ-N-281 does not apply. 2 - When starting material is Round Bar greater than 3"" dia, the mechanical properties of Hex Bar apply. 3.7 O-ring grooves and mating sealing surfaces must be inspected per the contractually invoked drawings or specifications. When the drawings or specifications do not provide specific defect criteria or state that no defects are allowed, the General Acceptance Criteria (GAC) standard must be used for inspecting O-ring grooves and mating sealing surfaces only. Repairs to sealing surfaces and O-ring grooves with unacceptable defects may be accomplished within the limits of the size and tolerances provided in the applicable drawing. Repairs thatwould exceed these limits require approval (including final dimensions). The data that is red lined (crossed out) is excluded from the GAC for this contract and is not to be used for acceptance or rejection criteria. The GAC document is identified as Contract Support Library Reference Number CSD008 at https://register.nslc.navy.mil/ 3.8 Thread Inspection Requirements - All threads on threaded parts must be inspected using appropriate inspection methods, inspection systems, and inspection gages/instruments in accordance with FED-STD-H28 series. Substitution of thecommercial equivalent inspection in accordance with ASME B1 series is acceptable. 3.8.1 System 21 of FED-STD-H28/20 must be used as a minimum inspection requirement for threads when the design drawing or design specification does not specify an inspection requirement. 3.8.2 For Navy and Shipyard drawings, system 21 of FED-STD-H28/20 may be substituted for System 22 without further Navy approval when the design drawing invokes System 22 and does not cite governing specifications that specifically require system 22. System 22 of FED-STD-H28/20 must be used when the drawing references other governing specifications that specifically require System 22, such as certain thread types of MIL-DTL-1222. 3.8.3 A written request for concurrence must be submitted when utilizing alternative measuring equipment or measuring systems not applicable to the specified inspection system. 3.9 Thread Lubricant - Thread lubricants containing molybdenum disulfide must not be used on this material. Bacteria in water, especially seawater, causes molybdenum disulfide to break down. The by-products of the breakdown form compounds which attack the fasteners. Anti-galling compound A-A-59004 must be used as a replacement when thread lubricant is required for assembly. 3.10 Internal Threads - All internal threads must be formed by cutting. Cold forming of internal threads is not acceptable. 3.11 Welding or Brazing - When welding, brazing, and allied processes are required, they must be in accordance with S9074-AR-GIB-010A/278, (S9074-AQ-GIB-010/248 for brazing) by personnel and procedures qualified under S9074-AQ-GIB-010/248 for all production and repair welding and brazing. Procedures and Qualification Data must be submitted for review and approval prior to performing any welding or brazing. 3.12 Certificate of Compliance - (SPECIAL EMPHASIS MATERIAL) The Contractor must prepare and submit a certificate of compliance certifying that the items/components furnished under this contract comply with the requirements of the procurement document, including any/all invoked specifications and drawings. 3.13Configuration Control - The Contractor must maintain the total equipment baseline configuration. For items of proprietary design, Contractor drawings showing the latest assembly configuration must be provided to the Government in electronic (C4) format. Definitions are provided elsewhere in the Contract/Purchase Order. 3.13.1 Waivers/Deviations - All waivers and deviations, regardless of significance or classification require review and approval by the Contracting Officer. Waivers and Deviations must be designated as Critical, Major, or Minor. The Contractor must provide a copy of this request to the QAR. Requests must include the information listed below. a. A complete description of the contract requirement affected and the nature of the waiver/deviation (non-conformance), including a classification of Critical, Major, or Minor. b. Number of units (and serial/lot numbers) to be delivered in this configuration. c. Any impacts to logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel or impacts to the operational use of the product. d. Information about remedial action being taken to prevent reoccurrence of the non-conformance. 3.13.2 All requests for Waivers/Deviations on NAVSUP-WSS Contracts must be submitted using the ECDS (Electronic Contractor Data Submission) system at https://register.nslc.navy.mil/ 3.13.3 ECPs - The Government will maintain configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the Equipment and its sub-assemblies. The Contractor must submit an Engineering Change Proposal (ECP) for any Class I or II changes that impact the Equipment covered by this contract. ECPs must be prepared in Contractor format, and must include the following information: a. The change priority, change classification (Class I or Class II), and change justification. b. A complete description of the change to be made and the need for that cha...
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/dbe9910a0f034839b734c22a0b6b34b2/view)
- Record
- SN06100601-F 20210819/210817230124 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |