SOLICITATION NOTICE
N -- N--Light Industrial Facility (LIFAC) Recapitalization Plan
- Notice Date
- 8/18/2021 3:09:27 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- SUP OF SHIPBUILDING CONV AND REPAIR NEWPORT NEWS VA 23607-2787 USA
- ZIP Code
- 23607-2787
- Solicitation Number
- N6279321R0010
- Response Due
- 9/3/2021 1:00:00 PM
- Archive Date
- 03/02/2022
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N6279321R0010 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 811310 with a small business size standard of $7.50M. This requirement is unrestricted and only qualified offerors may submit quotes. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-09-03 16:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be HAMPTON, VA 23661 The NAVSEA SUPSHIP - Newport News requires the following items, Meet or Exceed, to the following: LI 001: Purchase and Install New CNC Plasma Cutting Machine, 1, JOB; LI 002: Dual Side Drive Table Specs: Effective cut width: 72 inches Effective cut length: 144 inches Dual Side Rack and pinion drive, 4-1000 IPM standard Precision Linear Bearings both X and Y Axis Unitized Design with Stationary Control Stand Adjustable Leveling Pads for Easy Leveling Maximum plate thickness: 2 inch OEM Edge Connect CNC and Drive Interface w/Operator Console CNC Features: � Windows�10 Embedded � Intel J1900 Quad -core MCU or equivalent � 120GB SSD Hard Drive or better � 4 GB DDR3 or better � 19 inch Glass Touchscreen with 1366x768 Native resolution � PCAP (Projected Capacitive touch technology) � 2 USB 2.0 Ports � Built in Wireless Communication � Operator Console � Forward and backup on path function � Skip to pierce or Skip part function � Part Program Support � Remote Help � Supports Networking � Auto Gas Support � DXF Input � Simple Shape Nesting � Select-able Process Parameter table � Cut Pro Wizard CNC software nesting single part Sure Cut tech. applied (True hole, Rapid Part & Optimize consumable life, True Bevel when applicable) Manufacture Drive Interface Assembly Manufacture OEM type drive interface 3-Axis AC Servo Drive and Motor package Low Backlash Planetary Gear unit CP5 40 tooth 2.5 inch Pinion NEMA Electrical Enclosure/Machine Interface Power Disconnects 800 IPM Rapid speed with single phase power supplied 1000 IPM Rapid speed with three phase power supplied I/O To Support Up To 6 Tools, 1, EA; LI 003: Operator Console Specs: � Supports 1 Plasma Station � Supports 1 Oxy-Fuel Stations Standard � Supports Marking Functions Input Power for Machine � Input Power for Machine: 208VAC-240VAC single phase or three 15amp circuit Integrated Sensor THC Torch Height Control � Raise/lower stroke; 6 inches programmable up to 1,000 IPM (inches per minute) � Initial height positioning, adjustable stroke retract between cuts and dynamic positioning. � Accuracy of 0.0005 inch. � Mounting package, interconnecting cables and torch clamp Collision Detection Mount � Mounting package with magnetic integral breakaway clamp for collision detection and system shutdown Laser Pointer � Used to indicate position � Mounted on master carriage, 1, EA; LI 004: True Hole Technology by OEM Specs: �True Hole Technology can be achieved with the use of all of the following items: �Dual Side Drive Machine (Plate Fab, PLP Extreme, SGIV, MGEX2, VG Extreme) �Software Trushape Nesting Software �Packaged by OEM �OEM CNC Controller �Sensor Torch Height Control �HPR-XD Plasma System or XPR Plasma System �True Hole Capabilities are for Mild Steel Only �Max True Hole for -1/2"" hole in 1/2"" plate �Maximum True Hole for - 5/8"" hole in 5/8"" plate �Maximum True Hole for -1"" hole in 1"" plate, 1, EA; LI 005: OEM Automatic Gas Plasma System Specs: Power-Pierce Shield Technology for Extreme Piercing XPR170 Power Supply Core Automatic Gas Console (Mild Steel ONLY) Remote High-Frequency Quick Disconnect Machine Torch Assembly Shielded Torch Lead Set Work Cable XPR170 Consumable Parts Starter Kit, Mild Steel XPR170 Automatic Gas Specifications: � Power Requirements (3 Phase) 200/208/220 VAC 150 amp Slow Blow Fuse � 240 VAC 125 amp Slow Blow Fuse � 380 VAC 80 amp Slow Blow Fuse � 400 VAC 80 amp Slow Blow Fuse � 415 VAC 70 amp Slow Blow Fuse � 440 VAC 70 amp Slow Blow Fuse � 480 VAC 65 amp Slow Blow Fuse � 600 VAC 50 amp Slow Blow Fuse Gas System Requirements � O2 Oxygen 110 psi @ 150 scfh � N2 Nitrogen 110 psi @ 380 scfh � Air 110 psi @ 250 scfh Cutting Capacities: � Mild Steel (O2/Air): � 1-1/4 in. Maximum Production Pierce � 2 in. Maximum Edge Start Stainless Steel (N2/N2) Only: � (Additional processes available as options) � 3/4 in. Maximum Production Pierce � 1-1/2 in. Maximum Edge Start Aluminum (N2/N2) Only: (Additional processes available as options) � **EXPLOSION HAZARD** � Do Not Cut Aluminum on the Water Table � Doing So Can Result In Serious Personal Injury or Death. � � in. Maximum Production Pierce � 1 in. Maximum Edge Start Nitrogen Marking/Cutting Capability with the same Consumables *Includes during first year: Genuine OEM Preventative Maintenance Kit, 1, EA; LI 006: OEM Gas Console Specs: Add H2O, Argon and F5 Process To include all features of ""core"" gas console To include Supply Hoses: � Oxygen � Air � Nitrogen � F5 � H2O � Argon H2O Water 115 psi @9.4 GPH � Ar argon 110 psi @ 250 scfh � F5 Nitrogen/Hydrogen 110 psi @ 85 scfh Mild Steel (O2/Ar):(Argon Assist) � 1-1/4"" Maximum Production Pierce � 2"" Maximum Edge Start Stainless Steel (N2/H2O): � 1 "" Maximum Production Pierce � 1 1/2"" Maximum Edge Start Aluminum (N2/H2O): � **EXPLOSION HAZARD*** � Do Not Cut Aluminum on the Water Table -- Doing so � Can Result in Serious Personal Injury or Death � 1 "" Maximum Production Pierce � 1-1/2"" Maximum Edge Start To include Argon marking., 1, EA; LI 007: Compressed Air Booster Pump Specs: Compresses Incoming Air (up to 2:1 ratio) to help maintain consistent Air Pressure necessary for Plasma Systems System Includes: Air Booster Pump Air Tank 3-1/2 Gallon Water Separator Coalescing Filter Air Regulator, 1, EA; LI 008: Non Contour Manual Plasma Bevel Station Specs: Bevel in the Rail Axis Only Non Contour Mechanical Adjustment from +/- 0 - 45 degrees Visual Indicator for easy adjustment. Recommended table height of 30"" for optimal cut quality, 1, EA; LI 009: Oxy-fuel Torch Station � Recommended Cutting Torch from Manufacturer Specs: Motorized lifter, 6 inch stroke at 40 IPM Fuel, preheat and cutting oxygen hoses Individual Gas Control Solenoids Preheat and cutting oxygen solenoids All mounting hardware Op-Con Switches and Electrical interface Oxy fuel torch with three (3) cutting tips, 1, EA; LI 010: Plasma Software Package with License Specs: Includes one base software license plus: � Advanced plasma machine post processor (True Hole� requirement) � Automatic Nesting � Collision Avoidance (Rapid Part� requirement) � Skeleton Cut-up � Software Subscription (annual) All standard features including: Part Design & Development � Integrated 2D CAD program to create and edit CAD files � Variable Shape Parts feature to develop common parts from templates CAD/CAM Import & Conversion � Import CAD files (industry-standard file formats) � Import Bill of Materials properties from CAD files � Automatic CAD file correction and error notification � Automatic spline / ellipse smoothing and reduction � Separate multiple parts from a single CAD file � Automatic mapping of CAD layers to processes (cut, mark) � Automatically update nest with part revisions Job Set-up � Material database (with grade and gauge) � Customer database � Custom remnant creation (define irregular shapes for nesting) � Plate list � Part library � Assembly database OEM Technology and Built-in Process Expertise � True Hole� technology capable* � Rapid Part� technology capable* � True Bevel� technology capable* � Advanced process support and job set up on the CNC* � Material type, thickness, grade and class-based process parameters: � Separations for part, plate, and pierce spacing � Kerf and feedrate � Lead-in / out � Cutting techniques � Cut sequencing � automatic or manual � Automatic tabbing / micro-joints Interactive Manual Nesting � Jobs can contain sheets for different material types, thicknesses, and classes � Group parts into clusters for nesting � Drag, drop and bump parts on the nest � Move, mirror, rotate, or array parts � Prohibit / permit nesting inside of a part � Part interference detection � Edit lead-in/out position and properties within the nest � Animated cutting sequence simulation � Control cut direction and cut sequencing on part-by-part basis � Plate cropping Reporting � Management and shop reports � Export reports directly to PDF, Excel Spreadsheet, CSV or webpage Costing � User-defined machine and labor production costing � Automatic calculation of part production costs and part/nest utilization Output � OEM feature runs all of your most common job tasks from Automatic Nesting to output and more � Post-processor with NC output - Automatic kerf / pre-kerf compensation � DXF output Certain hardware and software requirements may apply. Advanced Plasma and Oxy Fuel Post Processor Functionality including Automatic torch spacing, automatic gas console support and automatic torch height control support, etc. Automatic Nesting (see attachment for more specs/details) Collision Avoidance (see attachment for more specs/details) Skeleton Cut-Up (see attachment for more specs/details) Software Subscription (see attachment for more specs/details) Local License (see attachment for more specs/details), 1, EA; LI 011: Cutting Installation Specs: Installation and training to be performed by Manufacturer / distributor. Installation charges are to be included in the bidding process to cover labor, travel and living expenses., 1, JOB; LI 012: Manual Pneumatic Raise/Lower Water Table Specs: This will allow customer to manually raise and lower the water in the table and To include clean out trays., 1, EA; LI 013: Removal Of Existing Plasma Table and Setting New Plasma In Place Specs: Contractor to disconnect all existing electrical, air and water to existing machine. Remove all existing plasma cutting machine and support equipment to storage area designated by the COR. Contractor to install new CNC Plasma Cutting machine and associated operating support equipment in area vacated by old plasma cutter including required electrical, air and water. Contractor to setup / test operate and train on site contractor and ship�s force personnel to operate and maintain IAW factory requirements. Contractor to turn over copies of operating / maintenance manuals to the COR. Contractor to turn over all operating, CAD software disks including any software USB security devices to the COR., 1, JOB; LI 014: Repair The Bay 2 & Bay 3 Blast Booths and Clemco Blasters. Specs: Contractor to make site survey to determine repairs required. Site survey to include review of the following known issues. Bay 2 Blast Booth - 900 CFM rated a. Replace rubber sheeting along blast booth wall. Dispose removed sheeting in dumpster located at LIFAC. b. Replace 900 CFM reclaim unit to include factory installed rubber lining and trash basket. Include 4 extra trash baskets. Turn over to Government Representative. c. Replace blower motor housing - 1 each. Retain moved item and turn over to Government Representative. d. Replace blower motor with fan blade - 1 each. Retain moved item and turn over to Government Representative. e. Replace adjustable vortex cylinder - 1 each. Dispose removed item in metal dumpster located at LIFAC. f. Provide inlet & outlet recova valves - 2 each. Retain moved item and turn over to Government Representative. g. Provide blast grit control valve � 1 each. Retain moved item and turn over to Government Representative. h. Provide blower motor housing mounting flange with vortex cylinder tube - 1 each. Dispose removed item in metal dumpster located at LIFAC. i. Replace blast booth door viewer � 2 each Dispose removed item in dumpster located at LIFAC. j. Upgrade booth to LED lighting. Dispose removed item in dumpster located at LIFAC. Bay 3 Blast Booth -1200 CFM rated. a. Modify Bay 3 blast booth to 2 suction tracks. Dispose removed item in metal dumpster located at LIFAC. b. Replace rubber sheeting along blast booth wall. Dispose removed sheeting in dumpster located at LIFAC. c. Replace 1200 CFM reclaim unit to include factory installed rubber lining and trash basket. Include 4 each trash baskets. Turn over to Government Representative. d. Replace blower motor housing -1 each, stock/dwg # B22802M Retain moved item and turn over to Government Representative. e. Replace blower motor with fan blade - 1 each. Stock/dwg # 19156 Retain moved item and turn over to Government Representative. f. Replace adjustable vortex cylinder -1 each, stock/dwg # 19068. Dispose removed item in metal dumpster located at LIFAC. g. Provide inlet & outlet recova valves - 2 each. Retain moved item and turn over to Government Representative. h. Provide blast grit control valve � 1 each. Retain moved item and turn over to Government Representative. i. Provide elbow transition piece - 2 each. Part/drawing # B7198M405, item # 6. Dispose removed item in metal dumpster located at LIFAC. j. Provide blower motor housing mounting flange with vortex cylinder tube -1 each. Dispose removed item in metal dumpster located at LIFAC. k. Replace blast booth door viewer � 2 each Dispose removed item in dumpster located at LIFAC. l. Upgrade booth to LED lighting. Dispose removed item in dumpster located at LIFAC., 1, JOB; LI 015: Remove old rusted legs and install 2 new OEM mounting legs to the Bay 3 Clemco Dust Collector Specs: �Dispose removed item in dumpster located at LIFAC. a. Shut down dust collector in back of Bay 3. b. Support and remove two rear legs. c. Install (2) new OEM legs and weld back on as needed. d. Paint all weld joints. e. Bring dust collector back into service., 1, JOB; LI 016: Purchase and Install Rotary Screw Air Compressor Specs: �Disposition equipment to DRMO. a. Remove existing EP-60 air compressor to designated location per government representative for DRMO disposal. b.Prep area to install new air compressor. c.Purchase and Install replacement air compressor similar to Ingersoll-Rand Model RS30I. d. Contractor to provide all required code compliant services to install air compressor. e. Factory technician to perform initial startup and operation of air compressor. f. Factory technician to train ships force in proper operation. g. All factory operation manuals to be turned over to the COR. h. Include 3-year maintenance / warranty package. i. Outside rated installation. j. Include low ambient option for operation below 25 degrees. Specifications See Suggested Air Compressor Specifications Zip File No. 9., 1, JOB; LI 017: Purchase and Install Air Dryer Specs: �Disposition equipment to DRMO. a.Purchase and install replacement air dryer to include all facility modifications required, piping, filters, pressure regulators, etc. b.Contractor to purchase and install replacement air dryer per OEM requirements. c.Factory technician to perform all required setup/startup requirements. d.Factory technician to provide operation and maintenance training to designated customer personnel. Specifications. Desiccant dryer type similar or equal to the existing type already installed., 1, JOB; LI 018: Purchase and Install Flexx Laser Engraver Specs: a.Purchase and install Flexx Laser Engraver. Laser/Fiber Flex Platform, 80WCO2 74,477.250 74,477.25 / 30W Fiber 30in x 20n Work Table, Deep Cabinet Design, Table Stand, Red Dot Pointer, LED Light, Shielded Optics, Auto Focus, USB Interface, Harsh Environment Kit, Connecting Cables, Optics Cleaning Kit, 1 Year Chassis, 2 Year Laser Tube Warranty Accessories to be Included: - 2.0"" Precision Lens - Housing with lockable casters - Multi-functional table concept with choice of one working table - Aluminum Grid Table - OEM Technology Protection Package - Air Assist with Pump - Rotary Fixture - 1 On-site Installation and 1 Day Training - 1 Year Priority Phone and On-Site Support - 3 Year Extended Warranty - Allow trade-in of 2 each Universal VLS6.60 Laser Engravers, 1, JOB; LI 019: Purchase and Install Replacement Embroidery Machine Specs: a.Purchase and install new Embroidery machine to include factory setup, training of ships force, 3-year maintenance and warranty agreement. Single-head high-speed portable Embroidery Machine with LCD Screen 15 Needles 1,200 SPM 19.5"" x 14"" Sewing Field Trimmed NDL Plate and laser pointer. Include Safety Beam Sensor and TIB Stand. With Slim cylinder arm and digitally controlled presser foot. STANDARD HOOPS: 12cm, 15cm, 18cm, 30 x 30 and 575 x 410 Plastic Tubular Hoops (2 each for increased production) WIDE CAP FRAMES: (2) 270 degree Cap Frames and Driver for hat embroidery (include cap gauge for hooping). OEM SOFTWARE: provide several digitizing approaches, from traditional to more advanced techniques, for creating premium embroidery. To include special stitch effects and advanced features give you the tools you need to create beautiful embroidery. OEM Pre-Selected Fonts and Designs. OEM Technician to deliver, install, setup and train customer onsite on machine. Maintenance agreement: 3-years from date of purchase, 1-day Technician visits quarterly during contract for machine adjustments, tuning, and machine training as needed., 1, JOB; LI 020: Purchase and Install Replacement Manual Powder Spray Outfit Disposition equipment to DRMO. Specs: Manual powder coating gun, with 6 meter cable and hoses. Electronic and Pneumatic controller. Portable cart. High capacity powder pump. 50 pound capacity powder hopper. Spare OEM powder coating gun with 6 meter cable. OEM technician to deliver, install, setup and train customer onsite on equipment, 1, JOB; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAVSEA SUPSHIP - Newport News intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAVSEA SUPSHIP - Newport News is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a quote on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments are permitted unless specifically authorized at the time of award. Sellers must comply with the applicable FAR Clauses listed: 52.204-99, 52.212-3 Offeror Representations and Certifications � commercial Items, 52.213-4 Full Text, 52.222-3, 52.232-33, 52.232.99, 52.246-16, 252.246-7000, 52.212-4, 52.212-5, 252.232-7003, 52.225-1. For labor only, NOT materials, the following FAR Clauses apply: 52.222-21, 52.222-26, 52.225-12, 52.233-3. For credit card 52.232-36, for purchases over 25,000, 52.204-10, 52.204-24, 52.204-25, 52.204-26. https://www.acquisition.gov/far/ Safeguarding of unclassified controlled technical information
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/fdb3af513ca541faa42591c946c5fc54/view)
- Place of Performance
- Address: 505 HOWMET DRIVE , Hampton, VA 23661, USA
- Zip Code: 23661
- Country: USA
- Zip Code: 23661
- Record
- SN06101636-F 20210820/210818230120 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |