Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF AUGUST 25, 2021 SAM #7207
SOLICITATION NOTICE

66 -- SMALL BUSINESS SET-ASIDE FOR HIGH-TEMPERATURE GAS HUMIDIFICATION SYSTEM

Notice Date

8/23/2021 1:23:56 PM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

334512 — Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use
 

Contracting Office

W6QK ACC-APG ADELPHI ADELPHI MD 20783-1197 USA
 

ZIP Code

20783-1197
 

Solicitation Number

W911QX21Q0209
 

Response Due

8/27/2021 12:00:00 PM
 

Archive Date

09/11/2021
 

Point of Contact

Shanna Dellinger, Brianna Murphy
 

E-Mail Address

shanna.dellinger.civ@mail.mil, Brianna.Murphy.ctr@mail.mil
(shanna.dellinger.civ@mail.mil, Brianna.Murphy.ctr@mail.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

The contractor shall provide�one (1) �turn-key high-temperature gas humidification system that meets or exceeds the following requirements: � The system shall be capable of humidifying air from one (1) to 100.0 % relative humidity (%RH), with an accuracy of five percent (5%) RH or better. � The system shall be capable of flowing humidified air at temperatures from ambient to 150 degrees Celsius (�C) or higher, with an accuracy of five degrees Celcius (5�C) or better. � The system shall be capable of flowing humidified air from one (1) to two (2) Liters per minute or higher, with an accuracy of five percent (5%) of the reading or better. � The system shall produce humidified air at output pressures of nine (9) bar or higher with variable output pressure option with an accuracy of 0.25 bar or better. � The system shall have an external humidity sensor allowing for control of humidity in a separate chamber. � The system shall be capable of accepting compressed air input up to 125 pounds per square inch, actual (psia) through a �-inch quick-connect, Swagelok compression fitting, or National Pipe Thread (NPT) connector. � The system shall be capable of accepting deionized water at supply pressures up to 35 psia through a �-inch quick-connect, Swagelok compression fitting, or NPT connector. � The system shall output humidified air through a �-inch Swagelok compression fitting or NPT connector. � The system shall be capable of remote control and digital output of system settings through a RS232, RS485, or RJ45 connection. � The system shall be mountable with appropriate mounting brackets for laboratory setup
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/5fbf238edc434cf5830bde94d065c765/view)
 

Place of Performance

Address: Aberdeen Proving Ground, MD 21005, USA

Zip Code: 21005

Country: USA
 

Record

SN06107377-F 20210825/210823230124 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |