SOURCES SOUGHT
66 -- SOURCES SOUGHT One (1) temperature-controlled film coating applicator device
- Notice Date
- 9/1/2021 9:39:30 AM
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- W6QK ACC-APG ADELPHI ADELPHI MD 20783-1197 USA
- ZIP Code
- 20783-1197
- Solicitation Number
- W911QX21Q0246
- Response Due
- 9/8/2021 8:59:00 AM
- Archive Date
- 09/23/2021
- Point of Contact
- Douglas Dennard, Phone: 3013943371
- E-Mail Address
-
douglas.c.dennard.civ@mail.mil
(douglas.c.dennard.civ@mail.mil)
- Description
- Sources Sought Template: (1) Action Code�:���� SOURCES SOUGHT This is a Sources Sought Notice only. This is not a request for proposal, but a survey to locate potential sources.� This Sources Sought does not constitute an Invitation for Bids, Request for Proposals, or a Request for Quotations, and is not to be construed as a commitment by the Government to issue an order or otherwise pay for the information solicited, nor is it a guarantee of a forthcoming solicitation or contract. It is for market research purposes only. Respondents will not be notified of the results of the evaluation. The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Women-Owned Small Business (WOSB), and Economically Disadvantaged Women-Owned Small Business (EDWOSB). The Government must ensure there is adequate competition among the potential pool of responsible contractors. Small business, Section 8(a), HUBZone, SDVOSB, WOSB, & EDWOSB businesses are highly encouraged to participate. (2) Date�:� 9/01/2021������������������� (3) Classification Code: 66 (4) NAICS Code:� 334516� (5) NAICS Size Standard:� 1,000 employees (6) Contracting Office Address:��� 2800 Powder Mill Road Bldg. 601 Adelphi, Maryland 20783 (7) Subject:� One (1) temperature-controlled film coating applicator device. (8) Proposed Solicitation Number:� W911QX21Q0246� (9) Sources Sought Closing Response Date: 9/08/2021 (10) Contact Point: Douglas Dennard, Contract Specialist, Douglas.C.Dennard.civ@mail.mil; (301) 394-3371 (11) A. Objective: To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation. B. Technical Specifications The Contractor shall deliver one (1) temperature-controlled film coating applicator device to apply electrode slurries on substrate foils and films for the purposes of producing experimental electrodes that meet the following technical specifications: coating area be large enough to accommodate a foil that is 12 inches wide and 20 inches long coater must have a surface that has vacuum holes and is electrically heated with the ability to hold a steady temperature up to 100 �Celsius accept vacuum input from either a house vacuum source or a vacuum pump have a control arm with a controllable coating speed and this control arm should be able to accept a wide variety of doctor blades, spiral-wire coaters, and slot-die attachments C. Responses: All interested parties should notify this office in writing, mail, fax, or e-mail within the posted date.� Responses shall include: To what extent each of the specifications can be met. �Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on the 1,000 employee standard that accompanies NAICS code 334516. If a small business, you must also list any small disadvantaged status you hold [HUBZone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.]. Past experience/ performance through the description of completed projects. (12) Responses to this sources sought are due no later than 11:59 AM eastern standard time (EST), 08 September 2021. Submissions should be emailed to Douglas Dennard at douglas.c.dennard.civ@mail.mil. Questions concerning this sources sought may be directed to Douglas Dennard at douglas.c.dennard.civ@mail.mil or 301-394-3371.� Please be advised that .zip and .exe files cannot be accepted. (13) Place of Contract Performance: United States (U.S) Army Research Laboratory ���� (ARL) �������������������������������������������������� ���� �2800 Powder Mill Road ����� Adelphi, MD 20783 (14) Estimated Delivery Timeframe or Period of Performance: No later than (NLT) 30 days after receipt of order (ARO)
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/98bb1f2900d34b55bdcb5084ea0cfb01/view)
- Place of Performance
- Address: Adelphi, MD 20783, USA
- Zip Code: 20783
- Country: USA
- Zip Code: 20783
- Record
- SN06120090-F 20210903/210901230127 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |