SOLICITATION NOTICE
35 -- 35--High Speed; Blind Stitch, Automatic Button Feeder, Button Hole, Button Hole Stitch, Fabric Pocket Welding, and Fabric Fusion Sewing Machines for the U.S. Army West Point
- Notice Date
- 9/7/2021 12:08:36 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333249
— Other Industrial Machinery Manufacturing
- Contracting Office
- W6QM MICC-WEST POINT WEST POINT NY 10996-1514 USA
- ZIP Code
- 10996-1514
- Solicitation Number
- W911SD-21-R-0191
- Response Due
- 9/17/2021 9:00:00 AM
- Archive Date
- 03/16/2022
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W911SD-21-R-0191 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 333249 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-09-17 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be West Point, NY 10996 The MICC West Point requires the following items, Meet or Exceed, to the following: LI 001: Blind Stitch Machine --See Specifications--MEET or EXCEED--, 2, EA; LI 002: Button Sewing System --See Specifications--MEET or EXCEED, 2, EA; LI 003: Button Hole Sewing--See Specifications--MEET or EXCEED, 1, EA; LI 004: Fabric Fusion Machine--See Specifications--MEET or EXCEED, 1, EA; LI 005: Fabric Pocket Welt MachineSee Specifications--MEET or EXCEED, 1, EA; LI 006: Automatic Feeding Button Sewing System--MEET or EXCEED, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC West Point intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC West Point is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 60 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5 (DEV), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, and the following clauses: 52.219-28, 52.222-19, 52.222-21, 52.22-22, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-50, 52.225-13, 52.232-34, 52.232-99 (DEV), 52.233-4 and DFAR 252.212-7001, 252.232-7003, 252.232-7010, 252.232-7006 and 252.209-7999. The full text of the referenced FAR clauses may be accessed electronically at http://farsite.hill.af.mil/VFFAR1.htm ""The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the US ARMY via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http://www.ecmra.mil/ https://armycmra.dmdc.osd.mil Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2013. Contractors may direct questions to the help desk at the help desk at: http://www.ecmra.mil/
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/01188f1cdcb944dfba71814c2c31028b/view)
- Place of Performance
- Address: Cadet Services Division / Uniform Factory 687 Hardee Place, West Point, NY 10996, USA
- Zip Code: 10996
- Country: USA
- Zip Code: 10996
- Record
- SN06123993-F 20210909/210907230129 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |