SOLICITATION NOTICE
37 -- HLD Purchase 3 Mowers
- Notice Date
- 9/7/2021 10:05:37 AM
- Notice Type
- Solicitation
- NAICS
- 333120
— Construction Machinery Manufacturing
- Contracting Office
- US ARMY ENGINEER DISTRICT WALLA WAL WALLA WALLA WA 99362-1876 USA
- ZIP Code
- 99362-1876
- Solicitation Number
- W912EF21Q0150
- Response Due
- 9/14/2021 8:00:00 AM
- Archive Date
- 09/29/2021
- Point of Contact
- Sara Edwards, Phone: 5095277216, Brooke Moore, Phone: 5095277913
- E-Mail Address
-
sara.edwards@usace.army.mil, brooke.n.moore@usace.army.mil
(sara.edwards@usace.army.mil, brooke.n.moore@usace.army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- TECHNICAL SPECIFICATIONS Hustler Z Diesel, 25-hp/VX4 72� Riding Mower or Equivalent INTENT The government intends to purchase and receive delivery of three zero turn, riding lawn mowers. The following specifications pertain to the mowers for use at Tri Rivers Natural Resources, Burbank, Washington. �������LAWN MOWER REQUIREMENTS Brand Name or Equivalent: Hustler �Z� Diesel, it shall have the following features at a minimum: ENGINE Diesel or equal, Horsepower 25, 1,131cc Starter 12-volt, solenoid shift, positive engagement Ignition Electronic Charging System 12-volt Fuel #2 Diesel Fuel Filter Heavy-duty, spin-on type Heavy Duty Canister Air Filter Cooling Liquid cooled. Direct-driven, mechanical cooling fan TRACTION DRIVE SYSTEM: Dual hydrostatic drive with a minimum of 21cc Hydro-Gear pump wheel motors and an auxiliary oil cooler, with a minimum 8� electric fan. Hydraulic line fittings made of stainless steel, Reservoir capacity 1.3 gallons or more. Ground Speed Infinitely variable: Up to 11.5 mph. Steering: Twin-lever steering with automatic park brake system that will provide independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls Turning Radius: True zero degree. Turns within its own length. Counter-rotating, independent drive wheels. Brakes Service: Hydrostatic dynamic braking. Parking: Internal friction brake in each wheel motor Mower Drive: Single V-belt drive from engine with electric enhanced spot brake clutch. Spring tension idler for extended belt life. Tires: Front: 13 x 6.50 - 6, rib tread. Drive: 24 x 12 - 12, turf tread. Capacities: Fuel System: minimum of 14.4 US gallons. Dimensions: Height: no more than 51 inches with roll protection system folded down, no more than 69 inches with roll protection system folded up. Length: 90.4 inches or less. Overall width: no more than 78 inches with discharge chute up. Tire-to-tire width: 56 inches minimum. Safety Features: Seat belt, operator presence system connected to seat, deck clutch and park brake switches. Stabilizer rollers at rear of tractor. Standard foldable rollover protection system. Seat: Suspension, molded vinyl, adjustable seat with fore and aft adjustment Construction: Mainframe is a minimum of 1.5 inch x 3 inch x .188 inch steel tubing. Drive motors mounted to 7 gauge welded steel or greater. Front caster wheels mounted with roller bearings on each wheel. Front caster forks are a minimum of .5 inch steel. Deck Lift: Foot-operated deck height adjustment and pin for setting height. Controls: Hand-operated throttle, ignition switch, and electric mower clutch. Integrated parking brakes. Indicators Hour meter, high temp light, glow plug light, oil pressure light, charge light, audible alarm for high engine temperature and low oil pressure, and electronic fuel gauge for each tank. ATTACHMENTS 72� Side-Discharge Deck Free-floating mower using three blades with center blade to the front. Mower to be suspended at the corners. Includes 6 deck-mounted rollers to improve flotation in rolling and uneven terrain. Deck Lift Raise and lower deck from driver�s seat with simple foot-operated deck-height adjustment. Pin for setting height, transport position. Construction minimum of 7 gauge welded steel. Minimum of 1.5 inch x .375 inch steel bars reinforcing impact areas on the trim edges. Reinforcements are to be welded onto spindle-mount areas. Steel deck housing is to be a minimum of 5.5 inches deep. Pulley/spindle covers all steel construction Cutting Heights Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment from 1 inch to 5.5 inches. Mowing Blades Heavy-duty, high-lift, heat-treated steel 72 in: 24.5 in x 3.00 in x .25 in flat blade, high sail Blade Tip Speed 72 in: minimum of 18,800 fpm. Blade Drive V-belt drive to all three spindles. Spring tension idler pulleys. Spindles Machine ductile housing, 1 inch diameter high carbon steel shafts and sealed ball bearings. Flotation Suspended mower floats on four spring assisted chains. Anti-scalp wheels. Discharge Chute Molded rubber, with and over-center design to allows for the chute to be folded up for improved hauling or to pass through gates. Width of Cut Minimum 72 inches. Accessories Flex Forks steering extension and a light kit 2.0 �������� DELIVERY AND LAWN MOWER SETUP The successful bidder shall ensure delivery of the mower to Pasco Maintenance Shop no later than 3 months after award of contract. The contractor shall deliver, unload, set up the mower operation and insure that all fluids are filed to their maximum operating levels. The contractor shall be responsible for packing and shipping the components in a manner that will ensure undamaged and complete arrival to Pasco Maintenance Shop. Shipments are received only during normal business hours Monday-Thursday 6:30AM - 5PM, excluding holidays. All shipments shall be delivered to: Pasco Maintenance Shop Ice Harbor Project Attn: Maintenance Shop Foreman 1215 E. Ainsworth Pasco WA 99301 Ph. (509) 547-5751 3.0 ���� WARRANTY Two year, warranty minimum Lifetime warranty on tractor frame Lifetime warranty on leading edge of the deck 3-year warranty on Engine 4.0��������� OPERATION & MAINTENANCE MANUALS The Contractor shall provide at least two complete copies of the Operation and Maintenance Manual for the equipment. The manuals shall include instructions on the operation, maintenance, repair, troubleshooting, warranty, and a list of recommended spare parts.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/fdddf707b1ea4129967546f6f17fdfee/view)
- Place of Performance
- Address: Pasco, WA 99301, USA
- Zip Code: 99301
- Country: USA
- Zip Code: 99301
- Record
- SN06124000-F 20210909/210907230129 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |