SOURCES SOUGHT
66 -- Lab-Scale Spray Dryer with Air Compressor - Sources Sought
- Notice Date
- 9/8/2021 8:06:40 AM
- Notice Type
- Sources Sought
- NAICS
- 339113
— Surgical Appliance and Supplies Manufacturing
- Contracting Office
- USDA ARS MWA AAO ACQ/PER PROP PEORIA IL 61604 USA
- ZIP Code
- 61604
- Solicitation Number
- 12505B21Q0158SS
- Response Due
- 9/13/2021 3:00:00 PM
- Archive Date
- 09/28/2021
- Point of Contact
- Aaron Dimeo, Phone: 6088900067
- E-Mail Address
-
aaron.dimeo@usda.gov
(aaron.dimeo@usda.gov)
- Description
- A market survey is being conducted to determine if there are adequate Small Business, SBA certified HUBZone, SBA-certified 8(a), Women-Owned, or Service Disabled Veteran-Owned Small Business (SDVOSB) contractors available for a proposed project who meet the specific criteria outlined below. This is a SOURCES SOUGHT NOTICE ONLY. This is not a solicitation Announcement or Request for Quote. It does not constitute any commitment by the Government. No award will result from this notice. The purpose is to conduct market research to gain knowledge of potentially qualified sources and to determine the capability of Small Business and/or Large Business companies to provide the supplies/services described below. Responses to this Sources Sought Notice will be used by the Government to make an appropriate acquisition decision. Department of Agriculture (ARS) requests responses from ALL socioeconomic categories in order to gain a more complete understanding of the market for these products and service. The USDA Agricultural Research Service (ARS) will not award a contract on the basis of responses or pay for the preparation of any information submitted. Respondents will not be notified of the results of this notice. After completing an analysis of the responses, the Government will determine whether to limit competition to 8(a), HUBZone, SDVOSB, Women-Owned, or other small business firms, or to proceed with issuing an unrestricted solicitation, inviting full and open competition. The NAICS code for the expected acquisition is 339113, with a Size Standard of 750 employees and the PSC Code is 6640. Any subsequent procurement will be conducted as a commercial item purchased in accordance with FAR Part 12 and as a Simplified Acquisition Procedure in accordance with FAR Part 13. The Department of Agriculture (ARS) has the need for the following products: 001) Lab-Scale Spray Dryer with Air Compressor Scope of Work: The USDA-ARS Plant Science Research Unit (PSRU) in St. Paul, MN is requesting quotes for a Lab-scale spray dryer for concentrating plant protein samples from aqueous suspensions into a dry powder. Background: The St. Paul ARS Unit conducts research on utilizing plant protein concentrates from herbage for new uses in human foods and animal feeds. Various methods of extracting proteins need to be tested and the proteins concentrated for further analysis. Current methods such as centrifugation and freeze drying are time-consuming and can alter the product characteristics. A lab-scale spray dryer would accelerate the research and would more closely approximate the methods used in the food and feed industry to concentrate proteins, facilitating adoption of the new protein products. Technical Requirements: Required Specifications for Lab-scale spray dryer for aqueous samples: Easy set up and operation. Suitable for heat sensitive samples. Water evaporation rate of at least 1000 ml per hour. Programable operation to vary inlet temperature, airflow, outlet temperature. Ability to stir suspended liquid samples. Dried product that is a free-flowing powder of 1 � 40 micrometers without oxidation and minimal moisture. Easy disassembly for cleaning between samples. Benchtop or mobile unit. Integrated or accessory air compressor Onsite installation and training for instrument user(s). Full 1-year warranty. Travel: Vendor will schedule onsite installation and training. Evaluation Factors:� Lowest price, technically acceptable. The government intends to award a firm-fixed price award based on the lowest price technically acceptable product. The lowest priced product will be evaluated first; if not found acceptable, the next lowest priced product will be evaluated, and so on until an acceptable product is identified. The government will not review higher priced products if the lowest priced product is determined to be technically acceptable. For a vendor�s products to be considered technically acceptable, they must meet all of the technical requirements identified in the solicitation. Key Deliverables: Lab-scale spray dryer Air Compressor Delivery Installation Training Warranty Delivery: Delivery is to be made to the USDA-ARS PSRU located at 1532 Lindig Ave. St. Paul, MN 55108 within 60 days after receipt of award.� The vendor shall provide all items F.O.B: destination. Location of the Government site is aboard USDA-ARS St. Paul, MN and will be identified in the contract. The Government anticipates award of a Firm Fixed Price contract. Capability Statement: Companies who have the experience, as well as an interest in doing business with ARS, should submit a Capabilities Statement which, for this notice, is not expected to be a proposal, but rather short statements regarding the company�s ability to demonstrate their expertise and experience in relation to the areas specified in this notice. Companies should also indicate whether they are a Small Business, SBA-certified HUBZone, SBA-certified 8(a), SDVOSB, or Women-Owned Small Business. To be eligible, all vendors must be registered in the System for Award Management (SAM) with a current and active registration. A DUNS (Dun and Bradstreet) number is required in order to register in SAM. A vendor can contact SAM by calling 1-866-606-8220 or e-mail at www.sam.gov. NO EXCEPTIONS.�Vendor must include their DUNS# on their capability statements. Finally, to be eligible, all vendors must be NDAA 889 Certified. If they do not currently have a NDAA 889 Certification, then they must complete the attached NDAA 889 Certification form and submit it to aaron.dimeo@usda.gov so that they can be added to the list of NDAA 889 Certified vendors. Submitting a Capability Statements: Responses should be submitted via email to aaron.dimeo@usda.gov by Monday, September 13, 2021 at 5:00 p.m. CST. Telephone inquiries will not be accepted. Disclaimer: This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate.�Respondents are also advised that under no obligation to acknowledge receipt of information or provide feedback about any of the information received.� After review of the responses received, the Government may issue a pre-solicitation synopsis and solicitation. No proprietary, sensitive, confidential or classified information shall be included with your response. The Government reserves the right to use any non-proprietary technical information in any resultant solicitation.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/549672ebd9344a31a113d8a19d02998f/view)
- Place of Performance
- Address: Saint Paul, MN 55108, USA
- Zip Code: 55108
- Country: USA
- Zip Code: 55108
- Record
- SN06126317-F 20210910/210908230135 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |