Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF SEPTEMBER 12, 2021 SAM #7225
SOLICITATION NOTICE

44 -- Thrust Bearing Coolers for BONNEVILLE LOCK & DAM, Oregon

Notice Date

9/10/2021 3:25:55 PM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

332410 — Power Boiler and Heat Exchanger Manufacturing
 

Contracting Office

US ARMY ENGINEER DISTRICT PORTLAND PORTLAND OR 97204-3495 USA
 

ZIP Code

97204-3495
 

Solicitation Number

W9127N21Q0111
 

Response Due

9/15/2021 11:00:00 AM
 

Archive Date

09/30/2021
 

Point of Contact

Robbie Newland, Phone: 5038084634, Barbara V. Byam
 

E-Mail Address

robbie.r.newland@usace.army.mil, barbara.v.byam@usace.army.mil
(robbie.r.newland@usace.army.mil, barbara.v.byam@usace.army.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

TECHNICAL SPECIFICATIONS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Technical Specifications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Thrust Bearing Coolers � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Bonneville Lock & Dam, Oregon � � � 1� General � � � � � Supply eight (8) complete thrust bearing cooler assemblies.� Furnish all labor, material, and equipment to fabricate complete� � � � � � thrust bearing coolers. � � � �2� References � � � � � �Thrust Bearing Oil Cooler, Drawing No. W57780070645_R3 � � � 3� �Government Furnished Equipment (GFE) � � � � � �None � � �4� � Submittals � � � � � �Provide initial shop/fabrication drawings for government to verify proposed design within 30 calendar days from date of� � � � � � � � � � �contract award. � � �5� �Specifications � � � � � �Provide eight complete Thrust bearing oil coolers assemblies based on dimensions shown in Thrust Bearing Oil Cooler,� � � � � � � � � � �Drawing No. W57780070645_R3 � � � � � �Provide �first article� initial set of a thrust cooler to government test fit in a unit prior to fabrication of the remaining seven (7)� � � � � � ���units. � � � � � �Each cooler assembly shall consist of one right-hand and one left-hand section that are bolstered together at the split plate� � � � � � � �referenced on Drawing No. W57780070645_R3 on the top left corner as �Split�. � � � � �� The headers shall be constructed of 2� minimum Schedule 40 carbon steel pipe, ASTM A106 Grade B.� � � � � � �The split plates shall be carbon steel, ASTM A516 Grade 70. � � � � ���Gaskets shall be 60 durometer neoprene. � � � � � �Hardware shall be zinc plated carbon steel, ASTM A516 � � � � � �Tubes shall be 5/8� OD x 0.049 minimum wall 90/10 copper-nickel, ASTM B111.� � � � � � �Fins shall be 1.375� OD x 0.02� nominal thickness, aluminum 1100 fin, 9 fins per inch. � � � � � �Tube joints shall be rolled and brazed.� � � � � � �Brackets shall be carbon steel �L� brackets with mounting holes. (10 brackets per cooler) ASTM A516 � � � � � �Connections shall be 2� Class 150 carbon steel ANSI flanges.� � � � � � �All carbon steel surfaces coated with Glyptal 1202.� � � � � �� All flange openings shall be covered for transit. � � � � � Cooler assemblies to be shipped in wooden skids.��� � � �6� �Testing and Inspection � � � � � �Preliminary inspection and hydrostatic test by USACE representative at place of manufacture will be required prior to� � � � � � � � � � � � �delivery of first available complete assembly. � � � � � �Contractor shall notify Government of inspection at least 14 days prior to date of inspection.� � � � � � �All cooler assemblies shall be hydrostatically tested at place of manufacturer by the Contractor before they are delivered.� � � � � � � � �They shall be tested to 75 psi.� The coolers shall hold this test pressure for 60 minutes without losing more than � psi. To be� � � � � � �followed up by a testing report issued to government before arrival at Bonneville Dam Warehouse.� � � � 7� �Acceptance� � � � � � �Final inspection and acceptance will be completed at the Bonneville Dam Warehouse, Bonneville Lock and Dam, Cascade� � � � � � � �Locks, Oregon, 97014.� The project can be accessed via south entrance gate from Interstate 84.� Monday through Thursday� � � � � � �0700 to 1630, excluding federal holidays.� Prior to shipment, the contractor shall notify the Bonneville Project POC a� � � � � � � � � � � � �minimum of 2 days in advance.�
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/67e41b6f470645f0a870686baad88cce/view)
 

Place of Performance

Address: Cascade Locks, OR 97014, USA

Zip Code: 97014

Country: USA
 

Record

SN06129160-F 20210912/210910230110 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |