SOLICITATION NOTICE
20 -- Shaft Sleeve
- Notice Date
- 9/16/2021 6:25:09 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 331420
— Copper Rolling, Drawing, Extruding, and Alloying
- Contracting Office
- DLA MARITIME - PORTSMOUTH PORTSMOUTH NH 03801-5000 USA
- ZIP Code
- 03801-5000
- Solicitation Number
- SPMYM3-21-Q-3018
- Response Due
- 9/28/2021 9:00:00 AM
- Archive Date
- 10/13/2021
- Point of Contact
- Rachel McCluskey, Phone: 207-361-7868
- E-Mail Address
-
rachel.mccluskey@dla.mil
(rachel.mccluskey@dla.mil)
- Description
- This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at FAR 13.5, as supplemented with the additional information included in this notice.� This announcement constitutes the only solicitation; a written solicitation will not be issued.� PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to BETASAM.� The RFQ number is�SPMYM3-21-Q-3018. This solicitation documents and incorporates provisions and clauses in effect through FAC 2021-06 (Effective July 12, 2021) and DFARS Change Notice 20210709. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions.� The clauses may be accessed in full text at this address: https://www.ecfr.gov.� The FSC Code is 2010 and the NAICS code is 331420. The Small Business Standard is 1000 Employees.�This requirement is being processed utilizing full and open competition.� This requirement will have a HUBZone preference in accordance with FAR 52.219-4. Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility.��Potential contractors will be screened for responsibility in accordance with FAR 9.104.� The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing: CLIN 0001: PROP SHAFT SLEEVES, PC-5 OF DWG 6408950 & ELECTRIC BOAT SPEC-E3163C, ALL WITH THE FOLLOWING DIMENSIONS: ID TO BE 26.4"" + 0"" / - .063""; OD TO BE 29"" +.063""/ - 0""; LENGTH TO BE 96.1"" + .25"" /- 0"". MATERIAL IS TO BE CAST NICRMOCB, PER MIL-C-24615A, GRADE-B & EB SPEC-E3163. RT, PT, VT, WELDABILITY AND HYDROSTATIC TESTS ARE REQUIRED. CHEMICAL AND MECHANICAL CERTS ARE ALSO REQUIRED. THE SLEEVE IS TO BE MARKED IAW NOTE 15 OF DWG 6408950. �QUANITY OF ONE (1) EACH NOTE: FOR ITEM 0001 SLEEVE ABOVE, ROUNDNESS OF THE ID IS TO BE WITHIN 0.015"" AND CONCENTRIC TO THE OD'S WITHIN .031"". STRAIGHTNESS OF THE LENGTH OF ALL SLEEVES IS TO BE WITHIN 0.010"". SURFACE FINISH 250 RMS OR BETTER. PRIOR TO START OF MANUFACTURE THE VENDOR MUST SUBMIT THEIR NDT PROCEDURES WITH ACCEPTANCE CRITERIA TO PNSY CODE 135T FOR REVIEW AND APPROVAL . IF ANY WELD REPAIRS NEED TO BE DONE ON ANY OF THE SLEEVES, VENDOR MUST FIRST SUBMIT THEIR WELDING PROCEDURE TO PNSY CODE 138, AS WELL AS APPLICABLE NDT PROCEDURES NOT ALREADY APPROVED TO CODE 135T, FOR REVIEW AND APPROVAL PRIOR TO ANY WELDING BEING DONE. CLIN 0002: DATA REQUIERMENTS PER THE FOLLOWING (PLEASE INCLUDE IN THE PRICE OF CLIN 0001 IF POSSIBLE). DATA REQUIREMENT, EXH ""A"", SEQ. A00l: TO BE A CERTIFICATE OF COMPLIANCE. VENDOR'S CERTIFICATE OF COMPLIANCE WITH ALL ATTRIBUTES OF MIL-C- 24615A AND EB SPEC-E3163C INCLUDING CHEMICAL AND MECHANICAL CERTS. DI-MISC-81356A AND PNS CLAUSE C.512 APPLY. DATA REQUIREMENT, EXH ""A"" SEQ. A002, TO BE VENDOR'S VT PROCEDURE PER NAVSEA TECH PUB T9074-AS-GIB-010/271 REV-I. ACCEPTANCE PER NAVSEA TECH PUB S9074-AR-GIB-0IOA/278, CASTINGS AND MIL-C-24615A AS AMPLIFIED BY EB SPEC-E3163C. VENDOR IS TO SUBMIT THEIR PROCEDURE TO PNSY CODE Cl35T FOR REVIEW & APPROVAL PRIOR TO PERFORMING ANY VT INSPECTION. UDI-T-23732B AND PNS CLAUSE C.514 APPLY. DATA REQUIREMENT, EXH ""A"", SEQ. A003, TO BE VENDOR'S PT PROCEDURE. VENDOR SHALL SUBMIT THEIR PT PROCEDURE IA W NA VSEA TECH PUB T9074- AS-GIB-010/271 REV-I, ACCEPTANCE PER MIL-STD-2035A, CASTINGS, CLASS 1 TO PNSY CODE 135T FOR REVIEW AND APPROVAL PRIOR TO PERFORMING ANY PT INSPECTION. UDI-T- 23732B AND PNS CLAUSE C.514 APPLY. DATA REQUIREMENT, EXH ""A"", SEQ. A004, TO BE VENDOR'S RT PROCEDURE. VENDOR SHALL SUBMIT THEIR RT PROCEDURE WITH PERFORMANCE IA W NAVSEA TECH PUB T9074-AS-GIB-010/271 REV-I, ACCEPTANCE IAW NAVSEA TECH PUB S9074-AR-GIB- 0IOA/278, TABLE XIX, CRITICALITY LEVEL I, TO PNSY CODE 135T FOR REVIEW AND APPROVAL PRIOR TO PERFORMING ANY RT INSPECTION. UDI-T-23732B AND PNS CLAUSES C.514 AND C.517 APPLY. DATA REQUIREMENT, EXH ""A"", SEQ. A005, TO BE VENDOR'S RT SHOOTING SKETCH (RSS). VENDOR SHALL SUBMIT THEIR RT SHOOTING SKETCH IA W NAVSEA TECH PUB T9074-AS-GIB-010/271 REV-I, WITH ACCEPTANCE IAW NAVSEA TECH PUB S9074-AR-GIB- 0IOA/278 AS AMPLIFIED BY DWG 6408950-D TO PNSY CODE 135T FOR REVIEW AND APPROVAL PRIOR TO PERFORMING ANY RT INSPECTION. UDI-T-23732B AND PNS CLAUSES C.514 AND C.517 APPLY. DATA REQUIREMENT, EXH ""A"" SEQ. A006, TO BE VENDOR'S VT RESULTS/REPORT. VENDOR SHALL SUBMIT THEIR VT TEST RESULTS FOR (1) EA SLEEVE. DI�NDTI-80809B AND PNS CLAUSE C.512 APPLY. DATA REQUIREMENT, EXH ""A"", SEQ. A007, TO BE VENDOR'S PT TEST RESULTS/REPORT. VENDOR SHALL SUBMIT THEIR PT TEST RESULTS FOR (1) EA. SLEEVE. PNS CLAUSE C.512 AND DI-NDTI-80809B APPLY. DATA REQUIREMENT, EXH ""A"", SEQ. A008, TO BE VENDOR'S RT INSPECTION RESULTS/FILM. VENDOR SHALL SUBMIT THE RT RESULTS/FILM OF (I) EA. SLEEVE. DI-NDTI- 80809B AND PNS CLAUSES C.512 AND C.517 APPLY. DATA REQUIREMENT, EXH ""A"", SEQ. A009, TO BE WELDABILITY TEST RESULTS/REPORT. VENDOR'S WELDABILITY TEST RESULTS PER MIL-C-24615A AS AMPLIFIED BE EB SPEC-E3163C TO BE SENT WITH THE FINISHED SLEEVES. DI-MISC-80678 APPLIES. DATA REQUIREMENT, EXH ""A"", SEQ. A010, TO BE A HYDROSTATIC TEST REPORT. VENDOR'S HYDRO TEST TO BE PERFORMED IA W DWG 6408950, NOTE 9.5 (50 psi) USING FRESH WATER AS A MEDIUM FOR A MINIMUM OF 10 MINUTES DURATION PLUS INSPECTION TIME. NO LEAKAGE OR PERMANENT DEFORMATION ALLOWED. DI-MISC-80678 AND PNS CLAUSE C.512 APPLY. ***NOTE: If DWG IS NEEDED, PLEASE CONTACT RACHEL MCCLUSKEY AT RACHEL.MCCLUSKEY@DLA.MIL.� YOU WILL BE ASKED TO COMPLETE A SECURITY AGREEMENT AND TO PROVIDE A COMPLETED DD FORM 2345. DRAWING REQUESTS MUST BE RECEIVED BY SEPTEMBER 3, 2021 AT 12:00PM EST OR THEY WILL NOT BE CONSIDERED. FAR CLAUSES AND PROVISIONS 52.202-1, Definitions 52.203-3, Gratuities 52.204-7, System for Award Maintenance 52.204-9, Personal Identity Verification of Contractor Personnel 52.204-13, SAM Maintenance 52.204-19, Incorporation by Reference of Representations and Certifications 52.204-24* See Attachment for this clause 52.204-25*See Attachment for this clause 52.204-26* See Attachment for this provision 52.209-5, Certification Regarding Responsibility Matters 52.211-14, Notice of Priority Rating 52.211-15, Defense Priority And Allocation Requirements 52.212-1, Instructions to Offerors - Commercial Items; 52.212-3, Offeror Reps and Certs 52.212-4, Contract Terms and Conditions � Commercial Items 52.216-1, Type of Contract (FFP) 52.222-22, Previous Contracts & Compliance Reports 52.222-25, Affirmative Action Compliance 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs 52.232-39, Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-2 Service of Protest 52.242-13 Bankruptcy 52.242-15 Stop Work Order 52.243-1, Changes Fixed Price 52.246-1, Contractor Inspection Requirements 52.247-32, F.O.B�Origin, Freight Prepaid 52.247-34, FOB Destination 52.252-1 Solicitation Provisions Incorporated by Reference 52.252-2 Clauses Incorporated by Reference 52.253-1, Computer Generated Forms 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including all base terms, conditions, and clauses outlined within the clause, plus the following clauses that have been specifically selected (checked off within the clause) for this procurement: 52.203-6 with Alt 1, Restrictions on Subcontractor Sales to the Government, 52.204-10 Reporting Executive Compensation and First-Tier Subcontract awards, 52.209-6, Protecting the Government�s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment, 52.219-4 Notice of Price Evaluation Preference for HUBZone or SB Concerns, 52.219-8 Utilization of Small Business Concerns, 52.219-28 Post Award Small Business Program Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor � Cooperation with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities, 52.222-26 �Equal Opportunity, 52.222-35 Equal Opportunity for Veterans, 52.222-36� Equal Opportunities for Workers w/ Disabilities, 52.222-37 Employment Reports on Disabled Veterans, 52.222-40 Notification of Employee Rights Under the National Labor Relations Act 52.222-50 Combating Trafficking in Persons, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging Contractor Policies to Ban Test Messaging While Driving, 52.225-13 Restrictions on Certain Foreign Purchases, 52.232-33 Payment by Electronic Funds Transfer-SAM DFARS CLAUSES AND PROVISIONS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials, 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7003. Control of Government Personnel Work Product 252.204-7004, System for Award Management 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls 252.204-7011 Alternative Line Item Structure 252.204-7012, Safeguarding of Unclassified Controlled Technical Information Deviation 2016 O0001) 252.204-7015, Disclosure of Information to Litigation Support Contractors 252.204-7016, * See Attachment for this clause. 252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. 252.204-7019, *See Attachment for this provision 252.204-7020, *See Attachment for this clause 252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability 252.211-7003 Item Identification and Valuation 252.223-7008� Prohibition of Hexavalent Chromium 252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. 252.225-7048, Export Controlled Items 52.225-7012, Preference for Certain Commodities 252.225-7021 Trade Agreements 252.232-7003, Electronic Submission of Payment Requests 252.232-7006, Wide Area Workflow Payment Instructions 252.232-7010, Levies on Contract Payments 252.243-7001, Pricing of Contract Modifications 252.243-7002, Requests for Equitable Adjustment 252.244-7000, Subcontracts for Commercial Items 252.246-7007, Contractor Counterfeit Electronic Part Detection and Avoidance System 252.246-7008, Sources of Electronic Parts 252.247-7023, Transportation of Supplies By Sea Note: Buy American Act-Balance of Payments Program Applies and the vendor shall list the country of origin for each item.� Trade Agreements Apply and the vendor shall list the country of origin for each line item. DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text) � 52.233-9001, Disputes:� Agreement to Use Alternative Disputes Resolution DLA PROCUREMENT NOTES (See Attachment for Full Text) C01 Superseded Part Numbered Items (SEP 2016) C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (SEP 2016) C04 Unused Former Government Surplus Property (DEC 2016) C07 Warstopper Material Program Buffer Availability C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017) C20 Vendor Shipment Module (VSM) (AUG 2017) E05 Product Verification Testing (JUN 2018) E07 Evaluation Factor for Origin Inspection (JAN 2018) H10 Awardee Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020) L04 Offers for Part Numbered Items (SEP 2016) L06 Agency Protests (DEC 2016) L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (APR 2018) L09 Reverse Auction (OCT 2016) L10 Competing Individual Delivery Orders Through Reverse Auctions (OCT 2016) L11 Small Business Program Representations (AUG 2017) L31 Additive Manufacturing (JUN 2018) M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016) M06 Evaluation of Offers for Part Numbered Items (SEP 2016) LOCAL CLAUSES (See Attachment for Full Text): YM3 A1: Additional Information YM3 C500: Mercury Control (Supplies) YM3 C501: Correction of Certifications YM3 C528: Specification Changes YM3 D2: Marking of Shipments YM3 D4: Preparation for Delivery (Commercially Packaged Items) YM3 D8: Prohibited Packing Materials YM3 E2: Inspection and Acceptance (Destination) YM3 E504: Notice of Constructive Acceptance Period YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard YM3 M8: Single Award for All Items Quoters are reminded to include a completed copy of 52.212-3 and it�s ALT I if not updated in SAM. This announcement will close�at 12:00PM EST on Friday, September 17, 2021.� The Point of Contact for this solicitation is Rachel McCluskey who can be reached at 207-361-7868 or email Rachel.mccluskey@dla.mil. All responsible sources may submit a quote which shall be considered by the agency.�� System for Award Management (SAM).� Quoters must be registered in the SAM database to be considered for award.� Registration is free and can be completed online at�http://www.sam.gov/. If� not the actual� manufacturer �� Manufacturer�s Name, Location, and Business Size must be provided. Please submit bids via email at Rachel.mccluskey@dla.mil. All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, and business size. Please note that the Government�s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/5b6a651e257443bc84d922ee0660dff2/view)
- Place of Performance
- Address: Kittery, ME 03904, USA
- Zip Code: 03904
- Country: USA
- Zip Code: 03904
- Record
- SN06135662-F 20210918/210916230121 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |