SOLICITATION NOTICE
J -- J--Power Tools & Maintenance
- Notice Date
- 9/20/2021 11:34:45 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333991
— Power-Driven Handtool Manufacturing
- Contracting Office
- W7PA USPFO ACTIVITY PRANG 156 CAROLINA PR 00979-1514 USA
- ZIP Code
- 00979-1514
- Solicitation Number
- W50S9321R0040
- Response Due
- 9/20/2021 2:00:00 PM
- Archive Date
- 03/19/2022
- Point of Contact
- Name: Danny Carrasquillo, Title: Contract Specialist, Phone: 7872537627, Fax: , Email: danny.carrasquillo_neira.1@us.af.mil;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W50S9321R0040 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 333991 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-09-20 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Statement of Work. The USPFO PR 156 MSC W50S93 requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary to conduct maintenance and repair on Fire & Emergency Services power tools and equipment to support Mu�iz Air National Guard Base (ANGB), Puerto Rico, as defined in this PWS. A site visit conference will be conducted on September 14, 2021 at 10:00 AM EST. This site visit will start at the Contracting Office, Building 29, Mu�iz Air National Guard Base, Carolina, PR 00979. To expedite base access, send the following documents to danny.carrasquillo_neira.1@us.af.mil before the date of the site visit: � Firm Name and Telephone Number � Visitor�s Name � Copy of Drivers License or any Identification Card in compliance with the Real ID Act. Interested contractors are encouraged to attend this site visit and shall follow base access requirements shown in the solicitation. All questions and requests for information (RFI) through the �Submit a Question� menu option within UNISON Marketplace notice must be received no later than 11:00AM EST (Local time) on September 17, 2021., 1, Job; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, USPFO PR 156 MSC W50S93 intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USPFO PR 156 MSC W50S93 is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 90 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be ""ACTIVE"" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. (a) Definitions. As used in this clause-- Commercially available off-the-shelf (COTS) item-- (i) Means any item of supply (including construction material) that is-- (A) A commercial item (as defined in paragraph (1) of the definition of ``commercial item'' in section 2.101 of the Federal Acquisition Regulation); (B) Sold in substantial quantities in the commercial marketplace; and (C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Domestic end product means-- (i) An unmanufactured end product that has been mined or produced in the United States; or (ii) An end product manufactured in the United States if� (A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that-- (1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or (2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or (B) The end product is a COTS item. End product means those articles, materials, and supplies to be acquired under this contract for public use. Foreign end product means an end product other than a domestic end product. Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries: Australia, Austria, Belgium, Canada, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece, Israel, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Spain, Sweden, Switzerland, Turkey, United Kingdom of Great Britain and Northern Ireland. Qualifying country component means a component mined, produced, or manufactured in a qualifying country. Qualifying country end product means-- (i) An unmanufactured end product mined or produced in a qualifying country; or (ii) An end product manufactured in a qualifying country if-- (A) The cost of the following types of components exceeds 50 percent of the cost of all its components: (1) Components mined, produced, or manufactured in a qualifying country. (2) Components mined, produced, or manufactured in the United States. (3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or (B) The end product is a COTS item. United States means the 50 States, the District of Columbia, and outlying areas. (b) This clause implements, Buy American. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for an end product that is a COTS item (see section 12.505(a)(1) of the Federal Acquisition Regulation). Unless otherwise specified, this clause applies to all line items in the contract. (c) The Contractor shall deliver only domestic end products unless, in its offer, it specified delivery of other end products in the Buy American--Balance of Payments Program Certificate provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, the Contractor shall deliver a qualifying country end product or, at the Contractor's option, a domestic end product. (d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry. (End of clause) This buy is an all or none buy, offerors are expected to bid on all items otherwise offer shall not be considered.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/3513ac2d274a4a9db1d712f58f6887e7/view)
- Place of Performance
- Address: See Statement of Work.
- Record
- SN06138252-F 20210922/210920230115 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |