SOLICITATION NOTICE
56 -- Hydraulic Steel Structure Fabrication of Vertical Lift Gate, Emergency Gate, and Service Gate
- Notice Date
- 9/20/2021 7:46:55 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332312
— Fabricated Structural Metal Manufacturing
- Contracting Office
- US ARMY ENGINEER DISTRICT WILMINGTO WILMINGTON NC 28403-1343 USA
- ZIP Code
- 28403-1343
- Solicitation Number
- W912PM21Q0027
- Response Due
- 9/20/2021 11:00:00 AM
- Archive Date
- 10/05/2021
- Point of Contact
- Alicia Evans, Phone: 9102514785, Missee Koehn, Phone: 9102514493
- E-Mail Address
-
alicia.evans@usace.army.mil, melissa.k.koehn@usace.army.mil
(alicia.evans@usace.army.mil, melissa.k.koehn@usace.army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- 20 September 2021 - Amendment 02 - attached - - QUOTE DUE DATE EXTENDED TO WEDNESDAY, 22 SEP 21, 4PM, EDT 17�September 2021 - Questions & Responses�- attached 2 September 2021 - Amendment 01 - attached ____________________________________ This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This is a combined synopsis/solicitation.� THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTES ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED.� This will be a 100% Small Business Set-Aside procurement utilizing full and open competition, after exclusions. The solicitation number is W912PM21Q0027 and the solicitation is issued as a Request for Quote (RFQ). The NAICS code is 332312, Fabricated Structural Metal Manufacturing, and the size standard is 500 employees. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2021-02. � Description of Requirement: Work will consist of the following: fabricate, assemble, paint, and deliver two hydraulic steel structures.�� The work will primarily consist of two tasks: 1) fabricating and assembling gate structures; 2) shipment to the project. All work will be performed in accordance with the contract drawings and specifications.� Work also involves preparing final �As-Built� documents. Falls Lake Dam emergency gate is a hydraulic steel structure and is classified as a vertical lift gate with dimensions 19-feet 10-inches in height and 9-feet 9-inches wide. The Falls Lake Dam service gate is a hydraulic steel structure and is classified as a vertical lift gate with dimensions 19-feet 8-inches in height and 9-feet 3-inches in width. The service gate has an attached 1-foot by 1-foot piggyback gate. The gates are constructed of structural steel members with skin plate on one side, seals and, a 45-degree bottom gate lip for hydraulic efficiency.� Side and top seals are J-type rubber seals, and the bottom seals are rectangular.� Six 16-inch diameter fixed wheels are mounted on cantilever axles on each side of each gate.� The weight of each gate is approximately 17,000 pounds.� Delivery shall be made to Falls Lake Dam located in Wake County North Carolina. Due to the critical nature of these structures and the specified framing arrangement many of the structural members are ""Fracture Critical"", therefore, all welding is required to be performed to AWS D1.5M/D1.5 welding code standard by a steel fabricator certified under the AISC Quality Certification Program, Category CBR (Major Steel Bridge) with a Fracture Critical Endorsement (F) or the new AISC Certification Program for Steel Bridge Fabricators (AISC 205-11) for ""Intermediate Bridges"" (IBR) meeting supplemental requirements for ""Fabricators of Bridges with Fracture-Critical Members"" (FC). Evaluation and Award: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Award shall be made to the lowest priced technically acceptable offer.� See solicitation provision 52.212-2. Each offeror must submit both a Price Quote and a Technical Proposal via email to Ms. Alicia Evans at, alicia.g.evans@usace.army.mil and Ms. Missee Koehn at, melissa.k.koehn@usace.army.mil.� No hard paper copies will be accepted or evaluated. Both the Price Quote and the Technical Proposal must be received by the closing date and time set for receipt of quotes. In an effort to reduce paperwork and reduce cost, all quotes shall be submitted electronically. All submissions shall be in Adobe PDF format and shall be on 8 � x 11 size pages in no less than a 10 pitch or 10 font. Offerors may use compressions utility software such as WinZip or PKZip to reduce file size and facilitate transmission. Title the file(s) in the following format: W912PM21Q0027_COMPANY NAME_PRICING W912PM21Q0027_COMPANY NAME_TECHNICAL Questions due Date and Time: 30 August 2021, 4PM, Eastern Time Request For Quotes No: W912PM21Q0027 Due Date of Quotes: 13 September 2021 Time by which Quotes are due: 2:00 P.M. (Eastern Time) Title of Project: Hydraulic Steel Structure Fabrication of Vertical Lift Gate, Emergency Gate, and Service Gate. Quotes are due as specified on the solicitation document (as amended if applicable). The time & date of Quote receipt will be the timestamp the emailed quotes are received by the Government. Do not assume that electronic communication is instantaneous. Offerors should time their upload effort with prudence by not waiting until the last few minutes�this will allow for unexpected delays in the transmittal process. If an electronic submission is uploaded minutes before the deadline but the upload doesn�t complete until after the deadline, the submission will be considered late. Offerors are encouraged to keep a copy of the upload confirmation for their record.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/4ff5709354914ba5802b38946e52f793/view)
- Place of Performance
- Address: NC, USA
- Country: USA
- Country: USA
- Record
- SN06138649-F 20210922/210920230118 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |