MODIFICATION
69 -- HazMat Training Props
- Notice Date
- 9/21/2021 12:08:08 PM
- Notice Type
- Justification
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- PREPAREDNESS SECTION(PRE20) WASHINGTON DC 20472 USA
- ZIP Code
- 20472
- Solicitation Number
- 70FA2021P00000042
- Archive Date
- 10/21/2021
- Point of Contact
- James D. Suerdieck, Phone: 3014477244, Gary Patrick Topper, Phone: 3014477280
- E-Mail Address
-
james.suerdieck@fema.dhs.gov, gary.topper@fema.dhs.gov
(james.suerdieck@fema.dhs.gov, gary.topper@fema.dhs.gov)
- Award Number
- 70FA2021P00000042
- Award Date
- 09/15/2021
- Description
- The HazMat training simulators consist of one (1) three dome railroad tank car training simulator, hereafter referred to as the railcar tanker trainer; one piping and valve array training prop; two (2) general service portable railroad tank car domes; two (2) chlorine portable railroad tank car domes; and two (2) high pressure portable railroad tank car domes. The railcar tanker trainer replicates typical access, elevation and working space around three types of railroad tank car domes, including one chlorine dome, one high pressure dome and one general service dome.� The domes are purposely designed to leak or fail in one fashion or another and configured with a ground-level control panel allowing instructors to �create� the intended malfunction, all of which require mitigation protocols from responding HazMat technicians, i.e., CDP HazMat students.� The chlorine and high pressure domes are plumbed to enable liquid line, vapor line and safety relief valve leaks. The general service dome is plumbed to leak from a liquid valve. The piping and valve array training prop is comprised of varied steel pipes and valves ranging in size �-inch to 12 inches mounted on a 10x20 foot platform. Water input and control manifold are situated on one end of the platform in an open steel box. The platform is decked with an anodized aluminum diamond plate and fitted with forklift pockets. The prop ships fully assembled and may be off-loaded onto a gravel pad and be fully operational within minutes. In the course of training and exercises, operators at the input manifold control various valve, flange, weld and thread �failures� as well as cracked and sheared pipes. All leaks in the larger pipes are plumbed to isolated locations with smaller pipe which minimizes water and drainage requirements. For example, there is an unseen, smaller diameter pipe within a 12-inch pipe. The smaller pipe carries the water that will ultimately simulates a discharge from the larger pipe.� The serpentine piping array provides realistic access and workspace challenges. Water may be supplied from a pumper truck or fixed utility. ����� Three types of railroad tank car domes, mounted on heavy-duty casters to facilitate mobility, provide a variety of leak simulations at the ground level. Ground level portability simply means that CDP HazMat students can familiarize, train and practice leak mitigation techniques before engaging the domes atop the railcar tanker trainer while wearing cumbersome and restrictive Personal Protective Equipment (PPE). These training props require a source of water, compressed air and hoses for full operation.� Specific functionality for each portable dome is as follows: Type� � � � � � � � � � � � � � � � � � � � � � � � � � � � Situation� � � � � � � � � � � � � � � � � � � � � � � � Mitigation General Service Dome� � � � � � � � � � � � � � Liquid valve leak (valve disabled)� � � � � Plug valve Chlorine Dome� � � � � � � � � � � � � � � � � � � � Valve open from vibration� � � � � � � � � � � Close valve � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Valve mount loose� � � � � � � � � � � � � � � � �Tighten mounting nuts or cap with C-Kit � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Pressure relief valve leak� � � � � � � � � � � Cap with C-Kit High Pressure Dome� � � � � � � � � � � � � � � Valve open from vibration� � � � � � � � � � � Close valve � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Valve mount loose� � � � � � � � � � � � � � � � �Tighten mounting nuts or cap with Midland Kit � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Pressure relief valve leak� � � � � � � � � � � Cap with Midland Kit
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/fbb30ba022ac455b963ea131f88bfb62/view)
- Record
- SN06139366-F 20210923/210921230116 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |