SOLICITATION NOTICE
J -- CGC ASPEN REPLACE CYLINDER ON MDE
- Notice Date
- 9/23/2021 6:29:32 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
- ZIP Code
- 94501
- Solicitation Number
- 70Z08521QP45P2000
- Response Due
- 9/28/2021 5:00:00 AM
- Archive Date
- 10/13/2021
- Point of Contact
- Anthony J. Andaluz, Barry Meyer
- E-Mail Address
-
anthony.j.andaluz@uscg.mil, barry.meyer@uscg.mil
(anthony.j.andaluz@uscg.mil, barry.meyer@uscg.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-84 dated Nov 1, 2015. All responsible sources may submit proposals that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. Past performance will be considered in the selection of the awarded vendor. TECHNICAL SERVICES FOR OPENING AND INSPECTING # 5 CYLINDER ON PORT MAIN DEISEL ENGINE FOR THE USCGC ASPEN 1.����������� Background.� This requirement is for the Contractor to open and inspect #5 cylinder on #2 MDE to determine cause of the oil leak found leaking from cylinder head spacer. 2.����������� Scope. The scope of this work is on the USCGC ASPEN port MDE CATERPILLAR 3608 3.����������� Objective. The objective of this requirement is to remove cylinder head and head spacer to determine cause of lube oil leak. Submit CFR with findings. 4.����������� Tasks. The contractor shall provide Labor and material to accomplish opening and inspecting cylinder head include but not limited to: 4.1.�������� Provide all necessary tools, parts and consumables required to remove and install cylinder head and head spacer. 4.2.�������� Remove cylinder head and spacer. 4.3.�������� Inspect for damage or failures. 5.����������� Delivery. Contractor shall provide a final report within 3 days of contract period of performance.� 6.����������� Government furnished property.� There is no Government furnished property (GFP) anticipated; however, the Government may in the course of this repair require GFP.�� If GFP is required, it will be incorporated via contract modification. 7.����������� Security Requirement. Base access is required.� If vendor requires access to ASPEN vendor shall have a valid driver�s license which does not have a �federal limits apply� limitation and show identification.� A CG representative from the cutter will sponsor and escort vendor to the cutter. 8.����������� Place of performance- USCGC ASPEN 1 Yerba Buena Road San Francisco, CA 94130 9.����������� Period of performance- TBD, but as soon as possible. INTERESTED VENDORS PLEASE SEND OFFICIAL QUOTE, WITH A SAM.GOV REGISTERED DUNS NUMBER, AND EMAIL TO ANTHONY.J.ANDALUZ@USCG.MIL COST BREAKDOWN OF QUOTE INCLUDING BUT NOT LIMITED TO LABOR COST PER HOUR AND MATERIALS IS REQUIRED.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/361067853faa4ccd8461a476a6823b94/view)
- Place of Performance
- Address: San Francisco, CA 94130, USA
- Zip Code: 94130
- Country: USA
- Zip Code: 94130
- Record
- SN06142299-F 20210925/210923230128 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |