SOLICITATION NOTICE
48 -- 01-086-5757, VALVE,REGULATING,FLUID PRESSURE
- Notice Date
- 9/23/2021 12:34:29 PM
- Notice Type
- Presolicitation
- NAICS
- 332912
— Fluid Power Valve and Hose Fitting Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M321R0001
- Response Due
- 11/9/2021 12:00:00 PM
- Archive Date
- 11/24/2021
- Point of Contact
- Mandy Phipps-Kuhlman, Phone: 6146928675
- E-Mail Address
-
mandy.phipps-kuhlman@dla.mil
(mandy.phipps-kuhlman@dla.mil)
- Description
- AMENDMENT: New solicitation opening date: 10/08/2021 New Solicitation closing date: 11/08/2021 All other terms and conditions remain the same. ********************* The solicitation will be available in FedBizOpps on its issue date of 06/17/2021. Quantity (including option quantity): 1,388 Unit of Issue: EA Destination Information: DLA Distribution Hill Delivery Schedule: 175 days ARO Proposed procurement contains a�100% option for increased quantities. This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).� Approved source is: WOODWARD, INC. 66503 P/N 100116-003 Specifications, plans or drawings are not available. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. TYPE OF SET-ASIDE: unrestricted VALVE, REGULATING, FLUID PRESSURE (PRESSURE CONTROLLER SERVOVALVE) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. RQ018:� CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#.�� The full text of C03 can be found in the DLAD Procurement Notes on the Web at: �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement) RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR) SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. CRITICAL APPLICATION ITEM WOODWARD, INC. 66503 P/N 100116-003 PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001� PRES MTHD:31� CLNG/DRY:1� PRESV MAT:00 WRAP MAT:CA� CUSH/DUNN MAT:BG� CUSH/DUNN THKNESS:B UNIT CONT:E5� OPI:M INTRMDTE CONT:E5� INTRMDTE CONT QTY:028 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING �REQUIREMENTS FOR PROCUREMENT ZZ = WRAPPING MATERIAL: PRODUCT'S OPENINGS SHALL BE CLOSED WITH NONCORROSIVE PLASTIC PLUGS OR END CAPS TO ENSURE NO DEBRIS WILL CONTAMINATE PRODUCT FLOW WHEN IN OPERATION. ZZ = SPECIAL MARKING REQUIREMENTS: ZZ -ADDITIONAL SPECIAL MARKING: Protected Cargo (Controlled, Sensitive, Classified, Pilferable items). Special Marking Code 40 applies -- ""Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."" The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/4069ee9cfc3940e59cee18dc8a9a1c2e/view)
- Record
- SN06142706-F 20210925/210923230131 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |