Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF OCTOBER 01, 2021 SAM #7244
SOLICITATION NOTICE

S -- Mobile Crane Contract (Naval Station Newport, Rhode Island)

Notice Date

9/29/2021 8:21:35 AM
 

Notice Type

Solicitation
 

NAICS

811310 — Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
 

Contracting Office

NAVAL FAC ENGINEERING CMD MID LANT NORFOLK VA 23511-0395 USA
 

ZIP Code

23511-0395
 

Solicitation Number

N4008521B2513
 

Response Due

11/11/2021 7:00:00 AM
 

Archive Date

11/26/2021
 

Point of Contact

Cam Ormiston, Phone: 4018411564
 

E-Mail Address

cameron.ormiston@navy.mil
(cameron.ormiston@navy.mil)
 

Description

The purpose of this solicitation is to acquire cranes and miscellaneous weight handling equipment and services for both long and intermittent short terms. Long term is defined as up to one year per option period. Short term is defined as weekly to monthly increments per piece of equipment. The primary thrust of the contract is toward long-term acquisitions. This solicitation also contains provisions for Contractor provided cranes with operators and rigging services. The Contractor is advised that all cranes used on Naval Station Newport must have OSHA certification as defined in 29 CFR 1915 and 1926. Contractor personnel operating cranes or providing rigging services shall be certified by the contractor as fully qualified. The Contractor shall provide documentation on all personnel qualifications to the Contracting Officer. All equipment and services supplied will be in compliance with current Federal, state and local statutes and regulations, and with Department of Defense (DoD) policies, instructions and guidance. 2. General Requirements applicable to all leased cranes a. All cranes shall not be more than five years old at the beginning of the lease period. b. Cranes provided must meet the standards set forth in COMNAVREG MIDLANT INSTRUCTION 11262.1, NAVFAC P-307, and 29CFR1926. Additionally, all cranes must have no jib; be equipped with LMI (load monitoring indicator) system; be equipped with anti-two block system; swage end fittings; NDT certification for hook. All cranes must have documentation that both hooks have passed NDT testing in accordance with the following NAVFAC P-307 specifications: ASTM E709 or MIL-STD 271. Acceptance criterion shall be no linear indications greater than 1/16 inch. All cranes shall be subject to Government inspection and weight testing. The Government will conduct full weight tests at 110 - 115% for both hooks at maximum capacity; minimum and maximum radius load and 50% boom length. c. Cranes provided must meet the standards set forth in COMNAVREG MIDLANT INSTRUCTION 11262.1, NAVFAC P-307, and 29CFR1926. Additionally, all cranes must be equipped with LMI (load monitoring indicator) system; be equipped with anti-two block system; NDT certification for hook. All cranes must have documentation that both hooks have passed NDT testing in accordance with the following NAVFAC P-307 specifications: ASTM E709 or MIL-STD 271. Acceptance criterion shall be no linear indications greater than 1/16 inch. All cranes shall be subject to Government inspection and weight testing. d. The Contractor shall provide signed repair / service history documentation of all maintenance, per manufacturer�s specifications, accomplished prior to crane delivery to Naval Station Newport. Cranes must be delivered with manufacturer�s service, operation and parts manuals one copy of each to be permanently retained by the Government. Further, all maintenance and repair actions accomplished during the lease period shall be documented, described and signed by the Contractor or his agent. A legible copy of the documentation shall be forwarded to the Public Works Department (Bldg. 1CC) Performance Assessment Representative (PAR) within one week of completion of the maintenance or repair. e. All cranes shall be in compliance with current Federal, state and local statutes and regulations, and with Department of Defense (DOD) policies, instructions and guidance. 3. Equipment Requirements: The contractor will follow the minimum equipment requirements for 27, 40, 50, 75, 100 and 250-ton capacity cranes. Evaluation of Bids will be Lowest Price Set Aside: None NAICS Code:�811310 -- Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/8423b06cbc434ccca3971b9be8870ea2/view)
 

Place of Performance

Address: Newport, RI 02841, USA

Zip Code: 02841

Country: USA
 

Record

SN06147658-F 20211001/210930203827 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |