SOLICITATION NOTICE
53 -- 1 NSN SIDC NSN 5331015210987 O-ring
- Notice Date
- 10/6/2021 11:29:34 AM
- Notice Type
- Presolicitation
- NAICS
- 339991
— Gasket, Packing, and Sealing Device Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- CM21259003
- Response Due
- 11/14/2021 9:00:00 PM
- Archive Date
- 11/30/2021
- Point of Contact
- Amanda Stroupe, Phone: 6146923116
- E-Mail Address
-
amanda.stroupe@dla.mil
(amanda.stroupe@dla.mil)
- Description
- NSN: 5331015210987 Nomenclature: O-Ring Set-Aside Type: unrestricted FOB: Origin I/A: Destination Requested Delivery: 125 Days Ship-To Address: Shipping instructions shall be provided with individual delivery orders. Material ordered under the terms of this contract shall be delivered within 125 days after the date of the order. Notwithstanding any other provisions/clauses of this contract, no deliveries shall be made prior to issuance of delivery order (DD Form 1155). This NSN will be procured under a Simplified Indefinite Delivery Contract (IDC) using FAR Subpart 13.5 procedures.� A base period of 1 year and 4 1-year option years with a total duration not to exceed 5 years. The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about October 29. Hard copies of this solicitation are not available. While pricing may be a significant factor in the evaluation of offers, the final award decision will be based on a combination of price, delivery, and performance. All offers shall be in the English language and US dollars. All interested parties may submit an offer. DLA Internet Bid Board System (DIBBS) quotations are acceptable for this solicitation. Offerors must complete the entire solicitation. Offers must be submitted on hard copy of the Request for Quote (RFQ), scanned, and uploaded through DIBBS (PREFERRED METHOD) or email offers to: Amanda.stroupe@dla.mil. O-RING NSN�5331015210987 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS (NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C,� STYLE 1. THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS. RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item. DATA IS PROPRIETARY OR INSUFFICIENT FOR COMPETITIVE PROCUREMENT THE ACCEPTABLE SOURCE(S) MUST MEET THE REQUIREMENTS OF THE CURRENT REVISION OF THE OEM DRAWING OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL ACTIVITY.� SOURCE APPROVAL REQUESTS/TECHNICAL DATA PACKAGES MUST BE SUBMITTED TO DLA WITH THE OFFER. CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 13499 200-2470 REVISION NR B�� DTD 04/24/2007 PART PIECE NUMBER: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001� PRES MTHD:33� CLNG/DRY:1� PRESV MAT:00 WRAP MAT:00� CUSH/DUNN MAT:NA� CUSH/DUNN THKNESS:C UNIT CONT:BV� OPI:M INTRMDTE CONT:D3� INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING �REQUIREMENTS FOR PROCUREMENT
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/908ce1f2e4e74706b2093d8aa6faa20f/view)
- Record
- SN06152565-F 20211008/211006230120 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |