SOURCES SOUGHT
J -- J85-GE-5 Series Engine DISK, COMPRESSOR, AIR; NSN 2840-01-488-8016 OK
- Notice Date
- 10/12/2021 8:29:35 AM
- Notice Type
- Sources Sought
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- FA8122 AFSC PZAAB TINKER AFB OK 73145-3303 USA
- ZIP Code
- 73145-3303
- Solicitation Number
- FD20302200346
- Response Due
- 11/11/2021 2:30:00 PM
- Archive Date
- 11/26/2021
- Point of Contact
- Shea Alexander
- E-Mail Address
-
shea.alexander@us.af.mil
(shea.alexander@us.af.mil)
- Description
- Sources Sought Synopsis for Manufacture J85-GE-5 Series Engine DISK, COMPRESSOR, AIR NSN: 2840-01-488-8016 OK P/N: 5126T33P02 AMC/AMSC: 3/V APPLICATION: J85 CAUTION: This market survey is being conducted to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for qualification and perform manufacture of the DISK, COMPRESSOR, AIR for use by United States Air Force (USAF) personnel.� The level of security clearance and amount of foreign participation in this requirement has not been determined.� Contractors/Institutions responding to this market research are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards.� The government will not reimburse participants for any expenses associated with their participation in this survey. INSTRUCTIONS: Below is a document containing a description of the item and function and a Contractor Capability Survey, which allows you to provide your company�s capability. � If, after reviewing this document, you desire to participate in the market research, you should provide documentation that supports your company�s capability in meeting these requirements.� Failure to provide documentation may result in the government being unable to adequately assess your capabilities.� If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities in order to perform that portion of the requirement (i.e., teaming, subcontracting, etc. � Both large and small businesses are encouraged to participate in this Market Research.� Joint ventures or teaming arrangements are encouraged. The proposed North American Industry Classification Systems (NAICS) Code is 336412, which has a corresponding Size Standard of 1,500 employees. � This SSS is issued solely for informational and planning purposes.� No funds are available to fund the information requested.� The information in this notice is current as of the publication date but is subject to change and is not binding to the Government.� Oral submissions of information are not acceptable. � Questions relative to this market survey should be addressed to the requiring activity, plus phone number. J85-GE-5 Series Engine DISK, COMPRESSOR, AIR 2840-01-488-8016 OK PURPOSE/DESCRIPTION ����� The Government is conducting market research to identify potential sources that possess the production data, expertise, capabilities, and experience to meet qualification requirements for manufacture of the Disk, Compressor, Air for J85 Engine, NSN:� 2840-01-488-8016 OK for USAF personnel. The Disk, Compressor, Air is a critical component part required to build J85 Engine. An interested company must submit a source approval request (SAR) and become an approved source to manufacture this item.� The manufacture qualification requirements (MQRs) and any applicable data lists can be found on SAM.gov by searching (Disk, Compressor, Air). The projected estimated quantity for this PR# FD20302200346 is approximately 24ea. First Article test required: Yes Forecasted/requested delivery schedule: 24ea on or before 31 Mar 2023 NSN: 2840-01-488-8016 OK P/N: 5126T33P02 Engine: J85 Item description: �(All dimensions are nominal) 10.9560 in. long X 10.9560 in. wide X 1.5460 in. high; weighing 8.0000 lbs. The Disk, 3rd stage is used in the assembly of spool configured rotors, is the attaching point for 3rd stage blades. Potential sources wishing to be qualified to provide the requirement specified above are REQUIRED to complete a Source Approval Request (SAR) package as specified in the Qualification Requirements for this item. The MQR-PSD-1 attached to this document is for reference only.� The official synopsis of the MQR can be found by searching sam.gov for the keyword �MQR-PSD-1� Submit SAR packages / SAR-process questions to the AFSC Small Business Office at: AFSC/SB 3001 Staff Drive, Suite 1AG 85A Tinker AFB, OK 73145-3009 Email:� afsc.sb.workflow@us.af.mil Website: https://www.afsc.af.mil/units/sbo.aspx �� NOTE:� Potential sources should only submit SAR related questions to the above contact.� Disclaimer: This SSS is issued solely for informational and planning purposes.� It does not constitute a solicitation (Request for Information, Request for Proposal, or Request for Quotation) or a promise to issue a solicitation in the future. CONTRACTOR CAPABILITY SURVEY MANUFACTURE OF THE DISK, COMPRESSOR, AIR FOR THE J85 ENGINE. Part I.� Business Information ����������� Please provide the following business information for your company/institution and for any teaming or joint venture partners: ����� Company/Institute Name: ����� Address: ����� Point of Contact: ����� CAGE Code: Phone Number: E-mail Address: Web Page URL: ����� Size of business pursuant to North American Industry Classification System (NAICS) Code:� ������ Based on the above NAICS Code, state whether your company is: Small Business����������������������������������������������� (Yes / No) Woman Owned Small Business�������������������� (Yes / No) Small Disadvantaged Business���������������������� (Yes / No) 8(a) Certified������������������������������������������������� (Yes / No) HUBZone Certified��������������������������������������� (Yes / No) Veteran Owned Small Business�������������������� (Yes / No) Service Disabled Veteran Small Business����� (Yes / No) ����� Central Contractor Registration (CCR).� ����������� (Yes / No) ����� A statement as to whether your company is domestically or foreign owned (if foreign, please indicate the country of ownership). Written responses via e-mail must be received no later than 30 days after initial sam.gov posting or close of business (11/11/2021)� Please e-mail your response advising if the requirements stated above can be met to the following address:� 421scms.requirements.workflow@us.af.mil; and to Shea Alexander Contract Specialist AFSC/PZAAB shea.alexander@us.af.mil Questions relative to this market research should be addressed to Shea Alexander � email: shea.alexander@us.af.mil Part II. Capability Survey Questions A.� General Capability Questions: Describe briefly the capabilities of your facility and the nature of the goods and/or services you provide.� Include a description of your staff composition and management structure. � Describe your company's past experience on previous projects similar in complexity to this requirement.� Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual point of contact (Contracting Officer or Program Manager). � What quality assurance processes and test qualification practices does your company employ?� Please provide a description of your quality program (ISO 9001, AS9100, etc.) � Describe your company's capabilities for generating, handling, processing and storing classified material and data. � Describe your company's capabilities and experience in generating technical data, engineering drawings and manuals.� Identify what software programs are utilized to generate these data products and what formats are available for delivered items. � Describe your company�s capability to obtain or manufacture molds/tooling.� Also, provide information on your type of molding process. � What is your company�s current maximum production capacity per month?� Provide information on any facility reserves you may possess to increase production capacity in the event of an immediate need do to critical operational mission requirements. � Are there specific requirements in the documentation that we provide that would currently preclude your product from being a viable solution to our requirement? � Include a detailed listing of facilities and equipment, including quantities, required to satisfy the requirements of this effort. a.��Provide an outline of the proposed process, including inspections. B.� Hardware Production Questions: Describe your capability and experiences in the manufacturing/fabrication of components. C.� Commerciality Questions: Are there established catalog or market prices for our requirement?� If you offer this product and/or service to both U.S. Government and commercial sources, is the same workforce used for both the U.S. Government and general public?� Is our requirement offered to both under similar terms and conditions?� Briefly describe any differences. Describe your standard warranty and return process for goods and services furnished to the government for items similar in nature to this requirement. � D.� Services Questions Describe your services capabilities and experience with regard to the requirements of this effort. � Describe your capabilities and experience in developing/modifying procedures.� Include associated upgrade of technical orders and preparation of new technical orders. � Demonstrate your ability and experience for the same or similar services, which are currently provided in the commercial and/or military environment by providing the following information on the same or similar items: a)�Contract Number b)�Procuring Agency c)�Contract Value d)�Services Provided � Describe your capabilities and experience in any required test, evaluation, and manufacture processes/procedures with regard to the required items. � Describe how you/your organization will identify and resolve parts obsolescence and diminishing manufacturing sources problems? � Discuss your process for addressing any fit, form, and or function issues that may arise out of the requirements of this effort. � Describe your process for maintaining inventory records and reporting on hand/work-in-process balance and manufacturing status to your customer as required. � How will your organization address the absence of drawings, specifications, technical data, test procedures, etc. � If your company can not perform the entirety of the requirement what part could or would your company be able to perform.� Provide specific info on what could be broken out for your company�s performance. To obtain data please submit your approved DD2345 ""Military Critical Technical Data Agreement"" via email to: Tinker, AFB AFLCMC/LZPTP (Technical Order Public Sales Office) 7851 Arnold St. Bldg 3, Room 205 Tinker AFB,�OK 73145-3009 aflcmc.ezgtp.pubsale@us.af.mil POC: Blaser Munger blaser.munger.2@us.af.mil Comm: (405) 736-3868 POC: Jim Galambos�james.galambos.1@us.af.mil � Comm: (405) 736-3197 AFLCMC/LZPES (Drawings Public Sales Office) 3001 Staff Drive, Suite 1AB82A Tinker AFB, OK 73145-3041 ocalc.lgldo.public@us.af.mil POC: Brad Ramsey bradley.ramsey@us.af.mil Comm: (405) 736-4402 Hill, AFB AFLCMC/LZPEF (Technical Order Public Sales Office) 6032 Fir Ave., Bldg 1237 Hill AFB,� UT 84056-5820 aflcmc.ezgtp.pubsale@us.af.miI POC: Sean Murphy sean.murphy.67@us.af.mil Comm: (801) 775-3863 AFLCMC/LZPEF (Drawings Public Sales Office) 6020 Gun Lane, Bldg 1218 Hill AFB,� UT� 84056-5820 aflcmc.ezgtp.pubsale@us.af.mil Robins, AFB AFLCMC/LZPEM (Public Sales Office) 285 Coch ran St. Robins AFB, GA 31098-1669 robinspublicsales@us.af.mil SASPO website link at: http://www.tinker.af.mil/Home/429SCMSSASP0.aspx POC: Summer Wishon� summer.wishon@us.af.mil Comm: (405)736-7373
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/6071857fc9214add807a8660f476b0ff/view)
- Record
- SN06156144-F 20211014/211012230114 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |