SOURCES SOUGHT
25 -- 1 NSN LTC SOURCES SOUGHT NOTICE #2 SPE7LX21R0157
- Notice Date
- 10/13/2021 7:26:22 AM
- Notice Type
- Sources Sought
- NAICS
- 314910
— Textile Bag and Canvas Mills
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- CL21218003
- Response Due
- 10/21/2021 10:00:00 AM
- Archive Date
- 11/05/2021
- Point of Contact
- Scott D. Knowles, Phone: 6146920639
- E-Mail Address
-
scott.knowles@dla.mil
(scott.knowles@dla.mil)
- Description
- NOTE: This 2nd Sources Sought Notice is issued to change the NAICS from 333318 to NAICS 314910 with small business size standard of 500 employees. ---------------------------------------------- RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RD002: COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND � � �NON-MANUFACTURERS) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ032: EXPORT CONTROL OF TECHNICAL DATA � � �This item has technical data some or all of which is subject to � � �export-control of either the International Traffic in Arms regulations � � �(ITAR) or the Export Administration Regulations (EAR), and cannot be � � �exported without prior authorization from either the Department of State � � �or the Department of Commerce. Export includes disclosure of technical � � �data to foreign persons and nationals whether located in the United � � �States or abroad. This requirement applies equally to foreign national � � �employees and U.S. companies and their foreign subsidiaries. DFARS � � �252.225-7048 is applicable to this data. � � �The Defense Logistics Agency (DLA) limits distribution of export-control � � �technical data to DLA contractors that have an approved US/Canada Joint � � �Certification Program (JCP) certification, have completed the � � �Introduction to Proper Handling of DOD Export-Controlled Technical Data � � �Training and the DLA Export-Controlled Technical Data Questionnaire � � �(both are available at the web address given below), and have been � � �approved by the DLA controlling authority to access the � � �export-controlled data. Instructions for obtaining access to the � � �export-controlled data can be found at: � � �https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ � � �To be eligible for award, offerors and any sources of supply proposed � � �for use are required to have an approved JCP certification and have � � �been approved by the DLA controlling authority to access � � �export-controlled data managed by DLA. DLA will not delay award in � � �order for an offeror or its supplier to apply for and receive approval � � �by the DLA controlling authority to access the export-controlled data. CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE � � �USED NOR INCORPORATED IN ANY ITEMS TO BE � � �DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION � � �SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT � � �DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. � � �SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR � � �APPROVAL UNLESS THEY ARE AUTHORIZED BY THE � � �SPECIFICATION REQUIREMENTS. ENGINEERING EXCEPTION TO DRAWING 12340747 NOTE 4 calls out the color to � � �be Green/Tan on steel hardware, All hardware shall be painted Black per � � �ESA DSCC-FL-20-28736. ENGINEERING EXCEPTION TO DRAWING 12340748 NOTE 4 � � �calls out the color to be Green/Tan on steel hardware, All hardware � � �shall be painted Black per ESA DSCC-FL-20-28736. ENGINEERING EXCEPTION � � �TO DRAWING 12340751 NOTE 4 calls out the color to be Green/Tan on steel � � �hardware, All hardware shall be painted Black per ESA DSCC-FL-20-28736. � � �ENGINEERING EXCEPTION TO DRAWING 12528730 NOTE 4 calls out the color to � � �be Green/Tan on steel hardware, All hardware shall be painted Black per � � �ESA DSCC-FL-20-28736. CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19207 57K4921 � � �REVISION NR � � DTD 10/19/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340761 � � �REVISION NR H � DTD 03/02/2007 � � �PART PIECE NUMBER: � � �IAW REFERENCE QAP 19207 12340761 � � �REVISION NR B � DTD 09/12/2002 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12460231 � � �REVISION NR � � DTD 09/01/1995 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 97403 13226E7463 � � �REVISION NR C � DTD 08/15/1997 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340197 � � �REVISION NR C � DTD 07/11/2019 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12342457 � � �REVISION NR C � DTD 05/30/1991 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340519 � � �REVISION NR D � DTD 11/07/1995 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340211 � � �REVISION NR C � DTD 07/11/2019 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340222 � � �REVISION NR A � DTD 02/21/1991 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 24617 MK61.103A � � �REVISION NR � � DTD 06/01/1954 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12387279 � � �REVISION NR A � DTD 01/27/2017 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12460335 � � �REVISION NR A � DTD 08/22/1997 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340748 � � �REVISION NR E � DTD 06/28/2006 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340764 � � �REVISION NR D � DTD 04/28/2000 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 24617 F-15.201 � � �REVISION NR � � DTD 08/01/1975 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12472301 � � �REVISION NR B � DTD 09/25/2017 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 24617 E-62.101 � � �REVISION NR � � DTD 06/01/1972 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 97403 13226E7538 � � �REVISION NR C � DTD 08/15/1997 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340682 � � �REVISION NR C � DTD 05/12/2000 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12339355 � � �REVISION NR H � DTD 09/26/2013 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340517 � � �REVISION NR E � DTD 07/11/2019 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340526 � � �REVISION NR D � DTD 04/20/2001 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340864 � � �REVISION NR A � DTD 02/17/1989 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12342456 � � �REVISION NR A � DTD 05/12/1992 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 81337 2-3-567 � � �REVISION NR B � DTD 03/24/2011 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340198 � � �REVISION NR B � DTD 01/02/1991 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340210 � � �REVISION NR D � DTD 11/05/1998 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340679 � � �REVISION NR B � DTD 09/15/2006 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340747 � � �REVISION NR E � DTD 12/06/2006 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340751 � � �REVISION NR D � DTD 06/28/2006 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12469117 � � �REVISION NR B � DTD 11/29/2006 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12463286 � � �REVISION NR B � DTD 01/01/1999 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12338839 � � �REVISION NR J � DTD 05/14/2020 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12480694 � � �REVISION NR � � DTD 08/10/2006 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12469123 � � �REVISION NR B � DTD 01/11/2013 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12480818 � � �REVISION NR A � DTD 12/11/2008 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12338839 � � �REVISION NR H � DTD 11/19/2013 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12507052 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12528730 � � �REVISION NR � � DTD 10/22/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518326 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518329 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518330 � � �REVISION NR � � DTD 10/22/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518333 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12528743 � � �REVISION NR � � DTD 10/22/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12528744 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518334 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518331 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518321 � � �REVISION NR � � DTD 10/22/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518322 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518327 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12518328 � � �REVISION NR � � DTD 10/16/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340197 � � �REVISION NR B � DTD 06/21/2016 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340211 � � �REVISION NR B � DTD 06/21/2016 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340517 � � �REVISION NR D � DTD 06/21/2016 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12528653 � � �REVISION NR � � DTD 10/19/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12340748 � � �REVISION NR E � DTD 05/05/2015 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 57K4921 � � �REVISION NR A � DTD 04/09/2012 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 57K4921 � � �REVISION NR � � DTD 12/26/2017 � � �PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951 THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ITEM DESCRIPTION TEXT�� � Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. �
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/5f90d112c40445fba9c7fc7a59252ca1/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN06157115-F 20211015/211013230114 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |