SOURCES SOUGHT
43 -- Seal Assembly, Shaft
- Notice Date
- 10/13/2021 7:04:40 AM
- Notice Type
- Sources Sought
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7LX22R0010
- Response Due
- 10/24/2021 8:59:00 PM
- Archive Date
- 11/08/2021
- Point of Contact
- Robert Varcho
- E-Mail Address
-
robert.varcho@dla.mil
(robert.varcho@dla.mil)
- Description
- Sources Sought Notice � National Stock Numbers (NSNs): 4320-01-199-2250����� Seal Assembly, Shaft, Spring Loaded 4320-01-199-2251����� Seal Assembly, Shaft, Spring Loaded 5330-01-468-1111����� Parts Kit, Seal Replacement � Destination Information: Various DLA Stocking Locations � This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). FOB will be at Origin and Inspection/Acceptance will be at Destination. The proposed procurement will be a Long-Term Contract (LTC) and is anticipated to be for a total of five (5) years, consisting of three (3) Base Years and two (2) Option Years. The Option Years may be exercised at the discretion of the Government. � Depending upon the results of market research, the Government anticipates using the policies contained in FAR Part 15 � Contracting by Negotiation - in its solicitation for the described supplies or services. � This is expected to be solicited as an unrestricted acquisition, utilizing other than full & open competition. The solicitation is expected to be available within the next 30 to 60 days on the DLA Internet Bid Board System (DIBBS: https://www.dibbs.bsm.dla.mil/rfp/default.aspx). Specifications, plans or drawings are not available. � If you have a potential interest in an upcoming solicitation, please complete and return the attached Market Research questionnaire and spreadsheet to robert.varcho@dla.mil by the close of business on October 22, 2021. Product Item Description (PID), Packaging and Marking Text: - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001: NSN: 4320-01-199-2250 ���� SEAL ASSEMBLY, SHAFT, SPRING LOADED. ���� ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ002 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:IS026 ���� REFERENCE NUMBER:CA060 ���� CRITICAL APPLICATION ITEM ���� STEIN SEAL COMPANY 03673 P/N SSCY121116168 ���� PREP FOR DELIVERY ���� LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. CLIN 0002: NSN: 4320-01-199-2251 ���� SEAL ASSEMBLY, SHAFT, SPRING LOADED ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:IS026 ���� REFERENCE NUMBER:IA061 ���� ���� STEIN SEAL COMPANY 03673 P/N SSCY121126169 ���� PREP FOR DELIVERY ���� LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. CLIN 0003: NSN: 5330-01-468-1111 ���� PARTS KIT, SEAL REPLACEMENT, MECHANICAL EQ ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:ZD025 ���� REFERENCE NUMBER:ZDP01 ���� REFERENCE NUMBER:IS026 ���� STEIN SEAL COMPANY 03673 P/N SSCY9301-KIT1 ���� PREP FOR DELIVERY ���� LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:31� CLNG/DRY:1� PRESV MAT:00 ���� WRAP MAT:00� CUSH/DUNN MAT:00� CUSH/DUNN THKNESS:0 ���� UNIT CONT:BV� OPI:M ���� INTRMDTE CONT:D3� INTRMDTE CONT QTY:AAA ���� PACK CODE:U ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:00 -00 No special marking ���� REFERENCE NUMBER:IP025 ************************************************************************************* � GLOSSARY � ************************************************************************************* PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ���� All DLA Master List of Technical and Quality Requirements take ����� precedence over ASTM D3951. ���� Mark and label all packaging and packing in accordance with MIL-STD-129. ���� The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be ����� as specified in the contract/purchase order. ���� PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING ����� REQUIREMENTS FOR PROCUREMENT ITEM DESCRIPTION TEXT ���� REFERENCE NUMBER RP001 ���� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ���� REFERENCE NUMBER RA001 ���� RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ���� REFERENCE NUMBER RQ002 ���� RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) ���� REFERENCE NUMBER RQ011 ���� RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� REFERENCE NUMBER IS026 ���� NO ASBESTOS AS DEFINED IN FED-STD-313 IS ���� PERMITTED IN THIS ITEM ���� REFERENCE NUMBER CA060 ���� NO DATA IS AVAILABLE.� THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION. ���� REFERENCE NUMBER IA061 ���� ADEQUATE DATA FOR EVALUATION OF ALTERNATE ���� OFFERS IS NOT AVAILABLE AT THE PROCUREMENT ���� AGENCY.� THE OFFEROR MUST PROVIDE A COMPLETE ���� DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ���� ALTERNATE PART FOR EVALUATION. ���� REFERENCE NUMBER ZD025 ���� MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL ���� NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT ���� CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED ���� UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY ���� USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED ���� INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; ���� AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. ���� PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS ���� CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN ���� A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR ���� MERCURY COMPOUND. (IAW NAVSEA 5100-003D). ���� REFERENCE NUMBER ZDP01 ���� FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS ���� (NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN ���� EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE ���� PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE ���� BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C,� STYLE 1. ���� THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN ���� MILITARY SALES (FMS) AND STOCK SHIPMENTS. ���� REFERENCE NUMBER IP025 ���� IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS �
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/8ee005d8859f49ab9437071ff8d9bcae/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN06157118-F 20211015/211013230114 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |