SOURCES SOUGHT
25 -- Control Unit, Pneumatic
- Notice Date
- 10/15/2021 6:08:04 AM
- Notice Type
- Sources Sought
- NAICS
- 336360
— Motor Vehicle Seating and Interior Trim Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7LX-22-R-0012
- Response Due
- 10/21/2021 8:59:00 PM
- Archive Date
- 11/05/2021
- Point of Contact
- Robert Varcho
- E-Mail Address
-
robert.varcho@dla.mil
(robert.varcho@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Sources Sought Notice National Stock Numbers (NSNs): 2530-01-447-7951����� Control Unit, Pneumatic 2530-01-480-7064����� Control Unit, Pneumatic Destination Information: Various DLA Stocking Locations This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). FOB will be at Origin and Inspection/Acceptance will be at Destination. The proposed procurement will be a Long-Term Contract (LTC) and is anticipated to be for a total of five (5) years, consisting of three (3) Base Years and two (2) Option Years. The Option Years may be exercised at the discretion of the Government. Depending upon the results of market research, the Government anticipates using the policies contained in FAR Part 12 � Acquisition of Commercial Items or FAR Subpart 13.5 � Simplified Procedures for Certain Commercial Items - in its solicitation for the described supplies or services. It is anticipated that this will be solicited as a Total Small Business Set-Aside. The solicitation is expected to be available within the next 30 to 60 days on the DLA Internet Bid Board System (DIBBS: https://www.dibbs.bsm.dla.mil/rfp/default.aspx). Specifications, plans or drawings are not available. If you have a potential interest in an upcoming solicitation, please complete and return the attached Market Research questionnaire and spreadsheet to Robert.varcho@dla.mil by the close of business on October 22, 2021. Product Item Description (PID), Packaging and Marking Text: - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001: NSN: 2530-01-447-7951 ���� CONTROL UNIT, PNEUMATIC ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ011 ���� DANA COMMERCIAL VEHICLE PRODUCTS, 52304 P/N 673870 ���� DAIMLER TRUCKS NORTH AMERICA LLC 64678 P/N ETN/673870 ���� OSHKOSH DEFENSE, LLC 75Q65 P/N 3311804 ���� PREP FOR DELIVERY ���� LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0002: NSN: 2530-01-480-7064 ���� CONTROL UNIT, PNEUMATIC TIRE ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:CA060 ���� DANA COMMERCIAL VEHICLE PRODUCTS, 52304 P/N 676233 ���� OSHKOSH DEFENSE, LLC 75Q65 P/N 3205556 ���� PREP FOR DELIVERY ���� LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. ************************************************************************************* � � � � � � � � � � � � � � � � � � � � � � � GLOSSARY ************************************************************************************* PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ���� All DLA Master List of Technical and Quality Requirements take ����� precedence over ASTM D3951. ���� Mark and label all packaging and packing in accordance with MIL-STD-129. ���� The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be ����� as specified in the contract/purchase order. ���� PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING ����� REQUIREMENTS FOR PROCUREMENT ITEM DESCRIPTION TEXT ���� REFERENCE NUMBER RP001 ���� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ���� REFERENCE NUMBER RA001 ���� RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ���� REFERENCE NUMBER RQ011 ���� RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� REFERENCE NUMBER IP025 ���� IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS ���� REFERENCE NUMBER CA060 ��� �NO DATA IS AVAILABLE.� THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/9fe5501eba39416cb69bf66b49a2e67e/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN06158769-F 20211017/211015230122 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |