SOURCES SOUGHT
72 -- Window Roller Shades - MechoShades (Mecho)
- Notice Date
- 10/19/2021 11:00:44 AM
- Notice Type
- Sources Sought
- NAICS
- 337920
— Blind and Shade Manufacturing
- Contracting Office
- 261-NETWORK CONTRACT OFFICE 21 (36C261) MATHER CA 95655 USA
- ZIP Code
- 95655
- Solicitation Number
- 36C26122Q0050
- Response Due
- 10/21/2021 4:30:00 AM
- Archive Date
- 01/28/2022
- Point of Contact
- Luis Gonzalez, Contracting Officer, Phone: 775-785-7162
- E-Mail Address
-
luis.gonzalez5@va.gov
(luis.gonzalez5@va.gov)
- Awardee
- null
- Description
- This is a Sources Sought notice for informational and planning purposes and shall not be construed as an obligation on the part of the VA. The purpose of this sources sought is to identify qualified businesses, including Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), Small Disadvantaged Business (SDB), Woman-Owned Small Business (WOSB), Historically Underutilized Business Zone (HUBZone) Small Business, 8a Small Business and Small Business concerns that are interested in and are capable of performing the work described herein. Your responses to the sources sought will assist the Government in determining the appropriate acquisition method, including whether a set-aside is possible. Department of Veterans Affairs, Network Contracting Office 21 will be possibly issuing a Request for Quote (RFQ) in the future to award a contract for MechoShade (Mecho) roller shades. The products needed consists of the following: (Approx. Qty 193) Multiple size motorized and manual single solar shadebands. (Motors and Metal Pockets included) Fabric: Ecoviel 1% open factor. Color: TBD. (Approx. Qty 72) Multiple size motorized and manual Double Solar and Blackout Shades. (Motors and Metal Pockets included) Fabric: Ecoviel 1% open factor. Color: TBD (Light Grey) and Blackout color Fabric: Chelsea Blackout (PVC Free, HPD, NFPA 701,) Color front and back TBD. Price includes same brand of extruded aluminum recessed ceiling pockets, closures, high stc sound stops and accessories, wall switch box and switch, or manual pull chains ALL labor to install metal pockets, electrical connections for motorized shades shade installation is by GC and/or their sub-contractor. Specifications and Project Information A.1 Solar Shadecloth Collection: EcoViel Screens 0950 1% Open 1. Mechoshade Sustainability and Performance Collections SoHo 1100 2. Shadecloth is composed of 100% polyester PVC FREE 3. Stocked: 63 and 118 wide rolls 4. Acoustic Performance 0.50 NRC or higher 5. Provide optimal solar shading 6. Contractor must assess and field measure the windows prior to submitting the bid 7. Shadecloth Anti-Microbial Characteristics: 'No Growth' per ASTM G 21 results for fungi ATCC9642, ATCC 9644, ATCC9645. 8. Fire-Test-Response Characteristics: Passes NFPA 701-99 small and large-scale vertical burn. Materials tested shall be identical to products proposed for use. 9. Contains zero chemical flame retardants, formaldehyde, antimicrobials, or PFC s A.2 Solar Shadecloth Collection: Chelsea Blackout 0250 Series 0% openness 1. Mechoshade Blackout Shade Cloth Collections 2. Shadecloth is composed of approximately 50% Acrylic Coating and 50% polyester PVC FREE 3. Shadecloth is available with a graphite/charcoal or white-colored backing 4. Stocked: 126 wide min. 5. Provide optimal solar shading 6. Contractor must assess and field measure the windows prior to submitting the bid 7. Shadecloth Anti-Microbial Characteristics: 'No Growth' per ASTM G 21 results for fungi ATCC9642, ATCC 9644, ATCC9645. 8. Fire-Test-Response Characteristics: Passes NFPA 701-99 small and large-scale vertical burn. Materials tested shall be identical to products proposed for use. 9. GreenGuard certified A.3 Roller Shade Pocket: ElectroPocket and Non-ElectroPocket 1. Provide premanufactured ElectroPocket and Non-ElectroPocket from MechoShade with removeable closure panel, for recessed mounting in acoustical tile, or drywall ceilings as indicated on the Construction Drawings. 2. Provide either extruded aluminum and or formed steel shade pocket with extruded aluminum trim for all exposed components, sized to accommodate roller shades, with exposed extruded aluminum closure, tile support and removable closure panel to provide access to shades. The max roll diameter shall provide a minimum of clearance of 1/4 inch (6 mm) from the top and 2 sides of the pocket and 1/2 inch (13 mm) clear from the inside of the accessible pocket closure. a. Provide ""Vented Pocket"" such that there will be a minimum 12 sq inch (7742 sq mm) of return air per lineal foot allowing the solar gain to flow above the ceiling line into the plenum or over the roller shades into the interior space. b. Provide High STC (Sound Transmission Class) stops as required between adjacent spaces. 3. Provide ETL/UL 235 Approved extruded aluminum KD ElectroPocket, in 10 ft. (3048 mm) lengths assembled on job site, with an integrated wiring raceway and mounting clips for: a. Line Voltage disconnect connectors. b. Wireless receivers. c. Low Voltage splitters. d. Daisy chain non-plenum wiring raceway and integrated pocket assembly. Models shown in A/E drawings below Contractor to Verify in field and determine actual size requirements prior to ordering. Model: ElectroPocket 4123 with tile support. a. Dimensions: (W x H): 5-15/16 x 5-1/4 inch x 15 -0 Model: ElectroPocket Model 5113 without tile support. a. Dimensions: (W x H): 8-3/4 x 9-1/2 inch 4. Hembars: Designed to maintain bottom of shade straight and flat. a. Full wrapped fabric covered bottom bar, flat profile with heat sealed closed end. b. Room-Darkening Shades: Provide a slot in bottom bar with wool-pile light seal. c. Room-Darkening Channels, Standard: Extruded aluminum side and center channels with brush pile edge seals, SnapLoc mounting base, and concealed fasteners. Channels to accept one-piece exposed blackout hembar to assure side light control and sill light control. 5. Components capable of being removed or adjusted without removing mounted shade brackets, or cassette support channel. 6. Smooth operation raising or lowering shades. 7. Cradle-to-Cradle certified for the complete shade system including operating hardware and shadecloth. Listed in C2C (DIR). 2. Warranty Requirements a. Manufacturer will provide Warranty documents for building owner acceptance. b. Minimum of ten (10) years warranty on Roller Shade, brackets, mounting hardware, and chains etc.. c. Roller Shades Motors, Motor Control system, and accessories: Manufacturer s standard non-depreciating five (5) year warranty. d. Blackout Shade Chelsea cloth and 1% open EuroViel 25 year warranty on fabric. e. The product will be free from defects in material and workmanship in normal use and service. f. Manufacturer will repair or replace any defective parts falling under a limited warranty for ten (10) years from the date of purchase and will be responsible for reasonable labor and shipping costs incident to repairing or replacing any such defective parts, subject to the exclusions set forth herein. g. Manufacturer will repair or replace, at manufacturer s option, any part of the product, or the entire product, that is defective in material or workmanship in normal use and service. h. An MS (MechoShade) Warranty applies to MS products fabricated by MechoShade Systems, LLC Lifetime Limited Warranty is defined to be the life of the project for which it was originally purchased, not to exceed 25 years from the date of shipment for specified products only. Warranty for unnamed hardware and fabrics shall not exceed 10 years from date of shipment. Warranty for unnamed electronics shall not exceed five years. i. This Warranty extends only to the original buyer of MS (MechoShade) products that have been installed by an authorized MS Dealer representative. MS shall be promptly notified of all complaints or claimed product defects with sufficient time for MS to inspect the product on site or at the dealer s facility. 4. Dimensions and Features a. Exact dimensions of existing wall conditions or hold-to dimensions for constructed walls and shade pockets to be built, will need to be established prior to production. b. Contractor is responsible for field verification of building dimensions prior to manufacturing. Coordination required with General Contractor and VA Interior Designer or Project Manager. The government intends to award one firm fixed price contract. The NAICS code is 337920 Blind and Shade Manufacturing and the corresponding size standard is 1000 employees. Interested businesses shall send by email only, the following information: Socio-Economic Category, DUNS number, number of employees, and business capabilities that includes relevant experience. In addition, please provide documentation that you are an authorized vendor of MechoShade (Mecho). Information shall be sent to luis.gonzalez5@va.gov by close of business October 21, 2021.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/fb3b0e7df1934a02ba447b07a94c29fb/view)
- Place of Performance
- Address: Department of Veterans Affairs VA Palo Alto Health Care System Stockton CBOC 6505 S. Manthey Rd, French Camp 95321
- Zip Code: 95321
- Zip Code: 95321
- Record
- SN06160666-F 20211021/211019230114 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |