Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF NOVEMBER 03, 2021 SAM #7277
SOLICITATION NOTICE

66 -- Quantum Lab Parts

Notice Date
11/1/2021 12:21:04 PM
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
334516 — Analytical Laboratory Instrument Manufacturing
 
Contracting Office
FA8751 AFRL RIKO ROME NY 13441-4514 USA
 
ZIP Code
13441-4514
 
Solicitation Number
FA8751-21-Q-0329
 
Response Due
11/19/2021 10:00:00 AM
 
Archive Date
12/04/2021
 
Point of Contact
Larry Barto, Phone: 3072871827
 
E-Mail Address
Larry.Barto.1@us.af.mil
(Larry.Barto.1@us.af.mil)
 
Description
Combined Synopsis/Solicitation for Commercial Items/Services General Information ����������� ����������� Title: Quantum Lab Parts ����������� Document Type:� Combined Synopsis/Solicitation ����������� Solicitation Number:� FA8751-21-Q-0329 ����������� Posted Date:� 1 November 2021 ����������� Questions Due By Date:� N/A ����������� Original Response Date: �19 November 2021 ����������� Current Response Date: �19 November 2021 ����������� Classification Code: 6650 ����������� Set-Aside:� NONE ����������� NAICS Code: 334516 Contracting Office Address Department of the Air Force, Air Force Materiel Command, AFRL � Rome Research Site, AFRL/Information Directorate, 26 Electronic Parkway, Rome, NY, 13441-4514 Description This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.� This announcement constitutes the only solicitation; Offers are being requested and a written solicitation (paper copy) will not be issued.� Further, offerors are responsible for monitoring this site for the release of amendments (if any) or other information pertaining to this solicitation.� Solicitation FA8751-21-Q-0329 is issued as a Request for Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2021-07 and Defense Federal Acquisition Regulation Supplement Change Notice (DCN) 20210929. See https://www.acquisition.gov/ for the full text of all provisions and clauses incorporated by reference herein. This procurement is being issued unrestricted for Full and Open Competition under NAICS code 334516. The contractor shall provide the items listed in the CLINs below on a Brand Name or Equal, firm fixed price basis, including the cost of shipping FOB Destination. CLIN 0001: Fiber Optic Faraday Rotator Motor, Model: F-FRM-2-NT-FA OR EQUAL with the following minimum specifications: No fiber pigtails Fiber Connector FC/APC Center Wavelength: 1550 nm Typical Insertion Loss: 0.3 dB Maximum Insertion Loss: 0.5 dB QTY: 4 EACH����������������������� Unit Cost:_________������������� Total Cost:___________ CLIN 0002: Polarization Beam Combiner/Splitters, Model: F-PBC-15-SM-FA OR EQUAL with the following minimum specifications: No fiber pigtails Center Wavelength: 1550.0 Fiber Type: Single Mode Fiber Connector: FC/APC Extinction Ratio: 22 dB Typical Insertion Loss: 0.4 dB Maximum Insertion Loss: 0.6 dB Return Loss: 50 dB Maximum Optical Power: 500.0 mW Center Wavelength Tolerance: 40 nm Operating Temperature: -5 to 70�C QTY: 4 EACH����������������������� Unit Cost:_________������������� Total Cost:___________ CLIN 0003: 90/10 Polarization Maintaining Fiber Optical Coupler, Model: F-PMC-1550-10 OR EQUAL with the following minimum specifications: Wavelength Range: 1550 nm Fiber Type: Polarization Maintaining Extinction Ratio: -24 dB Typical Insertion Loss: 0.05 dB Maximum Insertion Loss: 0.2 dB Maximum Excess Loss: <0.1 dB Coupling Ratio: 10/90 Back Reflection: <-65 dB QTY: 4 EACH����������������������� Unit Cost:_________������������� Total Cost:___________ CLIN 0004: 50/50 Polarization Maintaining Fiber Optical Coupler, Model: F-PMC-1550-50 OR EQUAL with the following minimum specifications: Wavelength Range: 1550 nm Fiber Type: Polarization Maintaining Extinction Ratio: -24 dB Typical Insertion Loss: 0.05 dB Maximum Insertion Loss: 0.2 dB Maximum Excess Loss: <0.1 dB Coupling Ratio: 10/90 Back Reflection: <-65 dB QTY: 4 EACH����������������������� Unit Cost:_________������������� Total Cost:___________ CLIN 0005: Polarization Insensitive Circulator, Model: F-CIR-15-N-FA OR EQUAL with the following minimum specifications: No fiber pigtails Fiber Type: Single mode Fiber Connector: FC/APC Operating Wavelength: 1550 nm Typical Insertion Loss: 0.7 dB Return Loss: 50 dB Bandwidth: � 20 nm Maximum Optical Power: 300 mW� Operating Temperature: 0 to 70�C Isolation/Cross Talk: 50 dB� Polarization Mode Dispersion: 0.1 ps Polarization Dependent Loss, Typical: 0.1 dB @ 23�C QTY: 4 EACH����������������������� Unit Cost:_________������������� Total Cost:___________ CLIN 0006: Corner Optical Mount, Model: U100-ACG OR EQUAL with the following minimum specifications: Optic Diameter25.4 mm Adjustments z, ?x, ?y Finish: Anodized black QTY: 4 EACH����������������������� Unit Cost:_________������������� Total Cost:___________ CLIN 0007: Laser Diode Controller, Model: LDC-3726 OR EQUAL with the following minimum specifications: Current: 0.5 A Laser Compliance Voltage: 10 V TE Current Range: -4.00 to +4.00 A TE Voltage Range: -8.00 to +8.00 V TE Output Power: 32 W Temperature Coefficient: <50 ppm/�C Temperature Range: -100 to +200�C Computer Interfaces: USB and GPIB Power Requirements: 100-120 VAC / 220-240 VAC; 500W; 50-60 Hz Laser Current Resolution: 10 �A Laser Current Accuracy: �(0.025% SP � 0.01% FS) (Unmodulated) Current Output 24 h Stability: <40 ppm Current Output 1 h Stability: <20 ppm External Modulation High Bandwidth: DC to 1 MHz External Modulation Low Bandwidth: DC to 15 kHz Laser Output Noise/Ripple Low Bandwidth: 2 �A (with LNF-320) Laser Output Noise/Ripple High Bandwidth: 10 �A Forward Voltage Resolution: 50 mV TEC Current Limit Accuracy: �0.025 A TEC Current 24h Stability: �0.002 �C TEC Current 1h Stability: �0.001 �C TEC Ripple/Noise (rms): <1.0 mA Photodiode Current Accuracy:� �2 �A Photodiode Current Range: 5 to 5000 �A Photodiode Reverse Bias: 0 to 5V Operating Humidity <85% relative, non-condensing QTY: 1 EACH����������������������� Unit Cost:_________������������� Total Cost:___________ TOTAL COST OF ALL CLINS:___________________ Offerors shall provide at least the same warranty terms, including offers of extended warranties, offered to the general public in customary commercial practice. Used, pre-owned, refurbished, or remanufactured goods will not be accepted.� Items must be factory new. The anticipated delivery date is 8 Weeks After Receipt of Order (ARO). All deliveries shall be made in accordance with FAR 52.247-34 FOB Destination. The place of delivery, acceptance and FOB destination point is Rome, NY 13441. The provision at 52.212-1, Instructions to Offerors � Commercial Items (JUN 2020), applies to this acquisition.� Addenda to the following paragraphs of 52.212-1 are: (b) Written proposals/quotes are due at or before 1:00 PM, (Eastern Time) 19 November 2021.� Submit to:� AFRL/RIKO, Attn: Larry Barto, by email to larry.barto.1@us.af.mil (b)(4)� Submit a technical description and/or a spec sheet of the items being offered. (b)(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. (b)(12) Include a statement verifying that your firm is capable of conforming to the requirements of DFARS clause 252.211-7003, Item Identification and Valuation. (g) Contract award. The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror�s initial offer should contain the offeror�s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; and waive informalities and minor irregularities in offers received. (k)� SAM.� Offerors must be registered in the SAM database to receive a contract award. If the Offeror does not become registered in the SAM database within 5 days after receiving notification from the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. The provision at FAR 52.212-2, Evaluation -- Commercial Items (Oct 2014) applies. In addition to the information within Paragraph (a), the following factors shall be used to evaluate offers: (i) price and (ii) technical capability All evaluation factors other than price, when combined, are approximately equal. The Government intends to make award to the lowest priced, technically acceptable Offeror. Offerors are required to complete representations and certifications found in the provision at FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items (OCT 2020), as well as the following: 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (OCT 2020) DFAR 252.204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services�Representation (Dec 2019) DFARS 252.225-7000 Buy American�Balance of Payments Program Certificate For your convenience all referenced certifications are attached to this solicitation. (Attachment 1)� The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items (OCT 2018), applies to this acquisition. The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (AUG 2020), applies to this acquisition.� The following additional FAR clauses cited in the clause are applicable to this acquisition: 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-6, Protecting the Government Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-28, Post Award Small Business Program Re-representation 52.222-3, Convict Labor 52.222-19, Child Labor�Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-50, Combating Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment By Electronic Funds Transfer�System For Award Management The following additional FAR and FAR Supplement provisions and clauses also apply: 52.204-16, Commercial and Government Entity Code Reporting 52.204-18, Commercial and Government Entity Code Maintenance 52.204-21, Basic Safeguarding of Covered Contractor Information Systems 52.211-6, Brand Name or Equal 52.204-22, Alternative Line Item Proposal 52.232-40, Providing Accelerated Payments to Small Business Subcontractors 52.247-34, FOB Destination 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7003 Control of Government Personnel Work Product 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services 252.211-7003, Item Identification and Valuation� Para. (c)(1)(i): None Para. (c)(1)(ii): None Para. (c)(1)(iii):� None Para. (c)(1)(iv):� None Para. (f)(2)(iii):� None 252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors 252.223-7008, Prohibition of Hexavalent Chromium 252.225-7001, Buy American and Balance of Payments Program 252.225-7048 Export-Controlled Items 252.225-7973, Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems�Representation (MAY 2020) (DEVIATION 2020-O0015) 252.225-7974� Representation Regarding Business Operations with the Maduro Regime. (DEVIATION 2020-O0005) 252.227-7015, Technical Data--Commercial Items 252.227-7037, Validation of Restrictive Markings on Technical Data 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area Workflow Payment Instructions 252.232-7010, Levies on Contract Payments 252.232-7017, Accelerating Payments to Small Business Subcontractors�Prohibition on Fees and Consideration 252.243-7001 Pricing of Contract Modifications 252.244-7000, Subcontracts for Commercial Items 252.246-7008, Source of Electronic Parts 252.247-7023, Transportation of Supplies by Sea � Basic 5352.201-9101, Ombudsman (JUN 2016) is hereby incorporated into this solicitation.� The Ombudsman for this acquisition is Ombudsman: Ms. Rosalind Harper (Primary) Mr. Steven Ewers (Alternate) 1864 4th Street WPAFB OH 45433 Phone: (937) 904-9700 � FAX: (937) 656-7321 afrl.pk.workflow@us.af.mil Note that the clause at 252.232-7003 is included in this solicitation.� DoD requires all payment requests (with a few exceptions) to be submitted and processed electronically.� All vendors/contractors must familiarize themselves with this clause and DFAR 232.7003 for specific procedures.� The DoD preferred electronic form for transmission is Wide Area Workflow � Receipt and Acceptance (see website � https://wawf.eb.mil).� Wide Area Workflow Training may be accessed online at http://www.wawftraining.com.� Please confirm in your proposal that your company is able to submit electronic invoices as set forth in the clause. Note that the clause at 252.211-7003 is included in this solicitation.� Agency specific guidance is provided below: For proposed Line Item Numbers with a unit price ? $5,000. Vendors will be expected to supply Unique Item Identifier (UII/ UID) labels. UII/ UID component data elements should be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; Error Checking and Correction 200 (ECC200) data matrix specification. (A)LABEL: If using Construct 1: Encode the two dimensional data matrix with CAGE CODE (Enterprise ID) and Serial #. If using Construct 2: Encode the two dimensional data matrix with CAGE CODE, Serial #, and Part/Lot/Batch #. Any costs associated in complying with these terms should be included as part of the firm fixed priced offer herein. The Defense Priorities and Allocations System (DPAS) rating DO-C9 has been assigned to this effort. All responsible organizations may submit a proposal, which shall be considered.
 
Web Link
SAM.gov Permalink
(https://beta.sam.gov/opp/5167d1ad9dbc45e7a510a6499f46c1b2/view)
 
Place of Performance
Address: Rome, NY 13441, USA
Zip Code: 13441
Country: USA
 
Record
SN06168542-F 20211103/211101230118 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.