SOURCES SOUGHT
65 -- Department of Veteran Affairs VA Long Beach Healthcare System Cath Lab Open Racks and Shelving
- Notice Date
- 11/3/2021 4:43:24 PM
- Notice Type
- Sources Sought
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- 262-NETWORK CONTRACT OFFICE 22L (36C262) LONG BEACH CA 90815 USA
- ZIP Code
- 90815
- Solicitation Number
- 36C26222Q0089
- Response Due
- 11/9/2021 4:00:00 PM
- Archive Date
- 12/09/2021
- Point of Contact
- Jeanette Otwell, Contract Specialist, Phone: (909) 801-5694
- E-Mail Address
-
Jeanette.otwell@va.gov
(Jeanette.otwell@va.gov)
- Awardee
- null
- Description
- Page 5 of 5 THIS REQUEST FOR INFORMATION (RFI) SOURCES SOUGHT IS ISSUED SOLELY FOR MARKET RESEARCH AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION 1. Responses to this Sources Sought must be in writing. The purpose of this Sources Sought Announcement is for market research only to make appropriate acquisition decisions and to gain knowledge of Small Business Capability, including Service Disabled Veteran Owned Small Businesses and Veteran Owned Small Businesses (SDVOSB/VOSB) interested and capable of providing the required equipment. 2. The NAICS for this requirement is NAICS 339112 Surgical and Medical Instrument Manufacturing. 3. Interested and capable Contractors should respond to this notice not later than 4:00 PM (PST) on November 09, 2021 by providing the following via email only to Jeanette Otwell at Jeanette.Otwell@va.gov . Please provide the following: a) company name b) address c) point of contact d) phone, fax, and email of primary point of contact e) DUNS number f) Type of small business, if applicable, (e.g. Services Disabled Veteran Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), 8(a), HUB-Zone, Women Owned Small Business, Small disadvantaged Business, or Small Business). g) A capability statement that addresses the organization s qualifications and ability to provide the required equipment with warranty to the VA Long Beach Healthcare System, 5901 E 7TH ST., Long Beach, CA 90822. Respondents are also encouraged to provide specific examples (e.g. contract number, point of contact information) of the Contractor s experience providing the same or similar equipment. 4. SDVOSB/VOSB respondents. a) If respondent is SDVOSB or VOSB, respondent is encouraged to provide proof of https://www.vip.vetbiz.va.gov certification. In addition, SDVOSB/VOSB Contractors are asked to acknowledge that they understand the limitations on sub-contracting pursuant to FAR 52.219-14, Limitations on Sub-Contracting, which will be included in the impending solicitation. Further SDVOSB/VOSB contractors are asked to respond that they are capable of providing the requested equipment keeping within the parameters of this clause. b) Small businesses, including SDVOSB/VOSBS are also advised that per 13 CFR, § 125.6 the prime contractor's limitations on subcontracting are as follows: In order to be awarded a full or partial small business set-aside contract with a value greater than $150,000, an 8(a) contract, a SDVOSB/VOSB contract, a HUBZone contract, a WOSB or EDWOSB contract pursuant to part 127 of this chapter, a small business concern must agree, in the case of a contract for services (except construction), it will not pay more than 50% of the amount paid by the government to its firms that are not similarly situated. Any work that a similarly situated subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. 5. Required Equipment: The Veterans Integrated Service Network 22 (VISN-22), VA Long Beach Healthcare System (VASDHS) is seeking a contractor that can provide brand name or equal of the following: Description Qty 001 24""x48""x73"" Shelving Unit 5 ABS Plastic Shelves (Grey) 4 Aluminum Posts w/o Holes 2 Brake and 2 Swivel Casters Frame (26""D x 74""H) (U Type) 1 EA 19 EA 002 Lateral Support Set- U Type 14 Set 003 Bottom Plate for U Rack (40cm) 14 EA 004 Frame (18""Dx74""H)(E Type) 3 EA 005 Lateral Support Set (E) Type 2 Set 006 Bottom Plate for E Rack (60cm) 2 EA 007 Basket Support (Horizontal) for U Frame (Pair) 57 PR 008 Basket Support (Horizontal) for E Frame (Pair) 12 PR 009 16x24 Poly Shelf w/Divider Slots 16 EA 010 Shelf Divider (Poly) 48 EA 011 HPL Shelf for Catheter Slides U 6 EA 012 Catheter Slide U w/ 9 Hooks 14 EA 013 Plastic Label Holder Clip - Horizontal 126 EA 014 Catheter Box Holder Type U; Includes: (2) 10cm Baskets, Ball Bearing Slides & Mounts, Dividers Sold Separately. Basket/ Tray Handle- U type (ABS) 1 Set 47 EA 015 10cm Deep Basket 24 EA 016 20cm Deep Basket 23 EA 017 40x10 Divider (short) 40 EA 018 60x10 Divider (long) 40 EA 019 40x20 Divider (short) 70 EA 020 60x20 Divider (long) 12 EA 021 Basket Stop (Set) 94 Set 022 Locks for Dividers 200 EA 023 Vinyl Label Holder (Credit Card Size) 50 EA 024 Rack Assembly & Basket Placement (Onsite) 1 EA 6. Equipment must include the following required Salient Characteristics and features *salient characteristics may change at time of solicitation: 24""x48""x73"" Shelving Unit 5 ABS Plastic Shelves (Grey) 4 Aluminum Posts w/o Holes 2 Brake and 2 Swivel Casters Catheter Box Holder Type U Includes: (2) 10cm Baskets, Ball Bearing Slides & Mounts, Dividers Sold Separately. 7. Please note that if VA s pending market research establishes that two or more VOSB or SDVOSB, who are certified in VA s Vendor Information Pages (VIP) site https://www.vip.vetbiz.va.gov, can provide the services, VA will set aside the underlying solicitation per 38 U.S.C. §8127. 8. All Offerors who provide goods or services to the United States Federal Government must be registered in the System for Award Management (SAM) database found at https://www.sam.gov. Registration must include Representations and Certifications. 9. The Non-Manufacturer Rule (NMR) in accordance with 13 CFR § 121.406, September 4, 2019 applies to this acquisition. a) For small business set-asides other than construction or service contracts the prime contractor that s supplying products to the government is required to cover at least 50 percent of the cost of manufacturing those products. The non-manufacturer rule is an exception to that requirement. The rule allows a small business to supply products it did not manufacture as long as those products come from another small business. b) A manufacturer is defined as a business that, with its own facilities, performs primary activities in transforming inorganic or organic substances, including the assembly of parts and components, into the end product being acquired. In other words, a manufacturer makes or produces products. Businesses may qualify as a non-manufacturer if it meets the following criteria: Does not exceed 500 employees Is primarily engaged in the retail or wholesale trade and normally sells the type of products being supplied Will supply the end products of a small business manufacturer or processor made in the United States, or obtains a waiver of such requirement See Title 13 Part 121.406 of the Code of Federal Regulations (CFR) for detailed information about the non-manufacturer rule. --End of Sources Sought Announcement
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/d99edd1cb1b1469e88da6721cc48f201/view)
- Record
- SN06170385-F 20211105/211103230114 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |