Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF NOVEMBER 11, 2021 SAM #7285
SOLICITATION NOTICE

H -- AST STI SP0001 External Inspection Scott AFB, Illinois

Notice Date

11/9/2021 11:40:08 AM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

541990 — All Other Professional, Scientific, and Technical Services
 

Contracting Office

W071 ENDIST OMAHA OMAHA NE 68102-4901 USA
 

ZIP Code

68102-4901
 

Solicitation Number

W9128F22Q0007
 

Response Due

11/24/2021 12:00:00 PM
 

Archive Date

12/09/2021
 

Point of Contact

Nicole Parker, Phone: 4029952210
 

E-Mail Address

nicole.l.parker@usace.army.mil
(nicole.l.parker@usace.army.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

5.1.� Basic Services. 5.1.1.� Perform an External AST inspection to also include the visual inspection of the containment area.� The contractor shall visually inspect containment for ability to contain the entire contents of the tank in the event of catastrophic failure, assessing for cracks, settlement, and deterioration. Record dimensions of cracks and provide photographic evidence of each deficiency. 5.1.2.� Provide DRAFT and FINAL inspection reports per the attached templates. The report(s) must include a record of NDE findings with drawings depicting plate layout and thickness measurement locations. Incorporate engineering analysis, suitability for service analysis pursuant to paragraph SUITABILITY FOR SERVICE, corrosion rate determinations, and remaining service life calculations. Provide separate report for each tank inspected. Specify the due date for the next inspection. 5.2.� SUTABILITY FOR SERVICE:� Evaluate inspection data to determine suitability for continued use. Identify conditions which pose a risk to integrity. Determine a metal loss threshold for mandatory repairs. In the determination of mandatory repairs: a. Use a ""first, do no harm"" approach to classifying tank repairs. b. Use Desired Service Interval as the time to next inspection unless notified otherwise by the Contracting Officer. c. Use minimum remaining thickness (MRT) no less than 100 mils at the next inspection. d. Do not classify as mandatory repair of conditions which are noncompliant with current standards but are un-related to structural or hydraulic integrity (e.g., gouge, improper weld spacing, weld profile). e. Apply repair determination to individual indications. Do not average across an entire plate or course.
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/2093132efd8a4c48a0423648d8f04e99/view)
 

Place of Performance

Address: Scott AFB, IL 62225, USA

Zip Code: 62225

Country: USA
 

Record

SN06173795-F 20211111/211110201532 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |