Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF NOVEMBER 26, 2021 SAM #7300
SOLICITATION NOTICE

66 -- 66--BAROMETER,ANEROID, IN REPAIR/MODIFICATION OF

Notice Date

11/24/2021 12:25:21 AM
 

Notice Type

Solicitation
 

NAICS

333999 — All Other Miscellaneous General Purpose Machinery Manufacturing
 

Contracting Office

NAVSUP WEAPON SYSTEMS SUPPORT MECH MECHANICSBURG PA 17050-0788 USA
 

ZIP Code

17050-0788
 

Solicitation Number

N0010422QLB03
 

Response Due

12/8/2021 12:00:00 AM
 

Archive Date

12/23/2021
 

Point of Contact

Telephone: 7176057574
 

E-Mail Address

BLAKE.BOYER@NAVY.MIL
(BLAKE.BOYER@NAVY.MIL)
 

Description

CONTACT INFORMATION|4|N713.4|EB9|717-605-7574|blake.boyer&navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| PRODUCTION LOT TESTING|1|| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)|16|Combo, Invoice & Receiving Report |N/A|TBD|N00104|TBD|TBD|see schedule|TBD|N/A|N/A|TBD|||||| NOTE FOR CONTRACTOR/ADMINISTRATIVE CONTRACTING OFFICER|3|||| TRANSPORTATION OF SUPPLIES BY SEA (FEB 2019)|2||| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (SEP 2021)|13|334513|500|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||x| The Purpose of this Amendment is to add subclin 0001AC for quantity of 19. The total quantity is hereby increased by 19 from, quantity one, to quantity 20. All other terms and conditions shall remain unchanged. \ ----------------------------------------------------------------------------- --- NAVSUP-WSS IS SEEKING ELIGIBLE CONTRACTORS TO FURNISH EFFORT INCLUDING --- --- LABOR, MATERIAL, AND FACILITIES AS MAY BE REQUIRED TO EVALUATE, REPAIR --- --- AND/OR MODIFY THE ITEMS AS SPECIFIED FOR STOCK. OFFERS SUBMITTED FOR --- --- REMANUFACTURED, SURPLUS OR NEW PROCUREMENT ACQUISITIONS WILL NOT BE --- --- CONSIDERED AND DETERMINED NON-RESPONSIVE. --- ------------------------------------------------------------------------------ THIS SOLICITATION IS FOR THE REPAIR OF 1 EACH NSN 6685-00-600-3777 ACCORDANCE WITH REFERENCE NUMBER 6079-1. PLEASE PROVIDE REPAIR PRICE AS FIRM FIXED, ESTIMATED, -or- NOT TO EXCEED. PLEASE SPECIFY ON PROPOSAL FIRM FIXED, ESTIMATED, or NTE. CONSIDER THE FOLLOWING WHEN SUBMITTING FIRM REPAIR PRICING: Repair price incudes all costs associated with receipt and complete repair of material that may be in piece part condition, missing hardware, damaged, handling damage, and missing parts (Missing on induction). Government-Source Inspection and Acceptance (G-S I&A) is required, please include all costs associated with Government-Source inspection into your unit price. If G-S I&A will occur at a location different from the offeror address, the offeror shall provide: 1) the Name, 2) Street Address and 3) Cage of the repair facility and/or packaging facility. "" PLEASE INCLUDE THE FOLLOWING IN YOUR QUOTE: A. Company CAGE (awardee CAGE):___________________ B. The unit repair price: $____________________________________ (this price is firm-fixed price (FFP)_____; estimated (EST)____; or not-to-exceed (NTE)______ C. Unit T&E fee:_______(If asset is determined BR/BER). D. Repair turn-around time :_______DAYS E. Throughput Constraint: _____/month. F. The new procurement cost of this NSN (if known): $________________________ G. New Unit Turn-Around Time: ______ (Estimate) H. Is this item (NSN) OBSOLETE: YES____ or NO _____ I. Government-Source Inspection location (as described above): Name/CAGE ___________________________________________ Address______________________________________________ Final Acceptance and Packaging location: Name/CAGE ___________________________________________ Address______________________________________________ J. Quote expiration date:________ PLEASE NOTE THE FOLLOWING WHEN GENERATING YOUR QUOTE: We are requesting that the quotes validity extend for 6 months from the submitted proposal quote date.. Teardown and evaluation only quotes will NOT be accepted. Induction Expiration Date: 180 days after the date of subsequent award. Any asset received after this date in days is not authorized to be repaired without bi-lateral agreement between the vendor and Contracting Officer. If Firm-Fixed Repair Pricing is provided, Beyond Economical Repair (BER) does not exist. With DCMA concurrence, Beyond Repair (BR) is possible. If the unit is determined BR, the unit price will negotiated downward from the awarded Firm-Fixed Repair price. All transportation to/from repair site will be paid for by US Navy. Requirements: MIL-STD Packaging, Source Inspection, FOB Source, CAV Reporting, IUID RTAT, Throughput Constraint, and Induction Expiration Date included in CLIN remarks below are defined as follows: Repair Turnaround Time (RTAT): the contractual delivery requirement is measured from asset Return to the date of asset acceptance under the terms of the contract (days). For purposes of this section, Return is defined as physical receipt of the F-condition asset at the contractor's facility as reflected in the Action Date entry in the Commercial Asset Visibility (CAV) system. In accordance with the CAV Statement of Work, the contractor is required to accurately report all transactions by the end of the fifth regular b business day after receipt and the Action Date entered in CAV must be dated to reflect the actual date of physical receipt. Throughput Constraint: Total assets to be repaired monthly after initial delivery commences. A throughput of 0000/month reflects no throughput constraint. Induction Expiration Date: Any asset received after this date in days is not authorized to be repaired without bi-lateral agreement between the Vendor and Contracting Officer. Price Reductions Any assets for which the contractor does not meet the required RTAT will incur a price reduction of TBD per unit. This adjustment will be implemented via Reconciliation Modification at the end of contract performance. Price reductions made pursuant to this section shall not limit other remedies available to the Government for failure to meet required RTATs, including but not limited to the Government's right to terminate for default. Reconciliation A reconciliation modification will be issued after final Inspection and acceptance of all assets inducted under this contract. The parties have agreed to a price (shown on the schedule page) for each unit at the negotiated RTAT. Such prices are based on the Contractor meeting the RTAT requirements described within the schedule page. If the Contractor does not meet the applicable RTAT requirement, the price adjustment as stated shall be applicable. Please submit a repair quote to Blake Boyer via email: blake.boyer@navy.mil. Please direct questions regarding this solicitation to the person listed above The resultant award of this solicitation will be issued bilaterally, requiring the contractors written acceptance prior to execution. \ 1. SCOPE 1.1 ;This specification contains the performance requirements for the repair and reconditioning of the ML-448/UM Aneroid Barometer. The technical and physical specifications and performance requirements of the Aneroid Barometer are in MIL-B-17089A(AS) including Amendment 1, and as modified herein.; 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 ""Document References"" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.1.2 ;Standards and Specifications. The document(s) listed herein form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the current editions of the Department of Defense Index of Specifications and Standards (DODISS) and supplements. The Department of Defense Single Stock Point (DODSSP)Website http://www.dsp.dla.mil provides product information for the DODISS (i. e. Military/Federal Specifications and Standards), Data Item Descriptions (DIDS), and other DODSSP products.MIL-B-17089A(AS) - Barometer, Aneroid ML-448()UM; and QQ-A-596 - Aluminum Alloy.; 2.1.3 ;Guidance Documents. The document(s) listed herein are referenced as guidance for methods and practices that have produced the desired performance in the past. Unless otherwise specified, the issues of these documents that are listed in the DODISS are those listed in the current editions of the DODISS and supplements. MIL-HDBK-454 - General Guidelines for Electronic Equipment; ANSI/EIA-649- National Consensus Standard For Configuration Management, dated 1 Feb 99; and NAVSEA ST700-BR-ROM-010 - Metrology Information and Document Automation System (MIDAS).; 2.1.4 ;Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the Standardization Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA, 19111-5094. Applications for copies of NAVSEA ST700-BR-ROM-010, should be addressed to Measurement Science Directorate, MS-35, Naval Warfare Assessment Division, Corona, CA, 91718-5000.; 2.1.5 ;Non-Government Documents-Standards and Specifications. The document(s) listed herein form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are to the current editions as listed by the publisher of the document. ANSI/ASQCZ1.4 - Sampling Procedures and Tables for Inspection by Attributes.; 2.1.6 ;ANSI/ASQC standards may be purchased from the American Society for Quality, Post Office Box 3005, Milwaukee, WI, 53201-3005; telephone AC(414)272-8575; Internet - http://www.asq.org/).; 2.1.7 ;Guidance Documents. The document(s) listed herein are referenced as guidance for methods and practices that have produced the desired performance in the past. Unless otherwise specified, the issues of these documents are current editions as listed by the publisher of the document. ANSI/ASQC Q9001 - Quality Systems - Model for Quality Assurance in Design, Development, Production, Installation and Servicing; ANSI/ASQC Q9002 - Quality Systems - Model for Quality Assurance in Production, Installation and Servicing; ANSI/NCSL Z540-1 - Calibration Laboratories and Measuring and Test Equipment - General Requirements; IEC/ISO Guide 25 - General Requirements for the Competence of Calibration and Testing Laboratories; and ISO-10012-1 - QA Requirements for Measuring Equipment.; 2.1.8 ;ANSI, IEC and ISO documents may be purchased from the American National Standards Institute (ANSI), 11 West 42nd Street, New York, NY, 10036, telephone AC (212) 642-4900, facsimile AC (212) 398-0023, Internet http://www.ansi.org/.; 2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained. DOCUMENT REF DATA=MIL-STD-130 | | |N |121116|A| |01| DOCUMENT REF DATA=MIL-B-17089 | | |A |961016|A| 1| | DOCUMENT REF DATA=MIL-I-45208 | | |A |961001|A| 2| | DOCUMENT REF DATA=ASQC-Z1.4 | | | |950227|A| | | DOCUMENT REF DATA=ASTM-B108 | | | |920515|A| | | DOCUMENT REF DATA=IPC2223 | | | |990901|A| | | DOCUMENT REF DATA=MIL-HDBK-454 | | |B |070415|A| | | DOCUMENT REF DATA=ICEA-S80.576 | | | |941003|A| | | DOCUMENT REF DATA=ISO9001 | | | |150915|A| | | DOCUMENT REF DATA=NAS947 | | | |950821|A| | | DOCUMENT REF DATA=ANSI-Z97.1 | | | |890703|A| | | DOCUMENT REF DATA=MIL-STD-973 | | | |000930|A| | | DOCUMENT CHANGE DATA=QQ-A-596 |ASTM-B108 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The BAROMETER,ANEROID repaired under this contract/purchase order shall meet the operational and functional requirements as represented by the Cage Code(s) and reference number(s) listed below. All repair work shall be performed in accordance with the contractors repair/overhaul standard practices, manuals and directives including but not limited to drawings, technical orders, manufacturing operations, tooling instructions, approved repair standards and any other contractor or government approved documents developed to provide technical repair procedures. CAGE___Ref. No. ;82205 6079-1; 3.2 ;Repair. When repaired, the Aneroid Barometer shall meet the technical and physical specifications and performance requirements of MIL-B-17089A(AS) unless otherwise noted below. Repaired units shall be calibrated and ready for use before being returned to the government.; 3.3 ;Materials. The materials used in the repair of the Aneroid Barometer shall meet the technical and physical specifications and performance requirements listed in MIL-B-17089A(AS). Certain of the specifications and requirements are modified as herein. The repair supplier shall provide documentation on requestattesting to the characteristics of the materials used. (a). MIL-B-17089A,paragraph 3.4.2. shall be modified by deleting the statement, ""Aluminum is not acceptable"" and adding ""Aluminum alloy in accordance with QQ-A-596 alloy numbers 43, 356, 613, or equivalent shall be allowed provided they meet the remaining requirements of MIL-B-17089A"". (b). Any coatings used must be corrosion resistant and must not chip or peel in the expected use environment. (c). MIL-B-17089A, paragraph 3.4.2., shall be modified by deleting ""a spacer ring of white enameled brass shall be provided"" and replacing with ""a spacer ring, if used, should be of cast, formed, drawn, or spun metal with white enamel finish or with the same finish as the dial"".; 3.4 ;Repair Process. The processes used in repairing the Aneroid Barometer shall be sufficient to ensure that the repaired product is equal to a new unit in performance; and substantially identical to a new unit in fit, form, finish, function and operation.; 3.5 ;Calibration. When calilbrated, the Aneroid Barometer shall meet the per- formance requirements of MIL-B-17089A(AS).; 3.5.1 ;Calibration Procedures. A written calibration procedure shall be used when calibrating the Aneroid Barometer. The calibration procdure shall use measurement methods and standards that are traceable to national standards or independently verifiable natural physical constants. The calibration procedure used shall be capable of verifying that the Aneroid Barometer meets the specified performance requirements. NAVSEA ST700-BR-ROM-010 may be used as a guide to identify some calibration procedures that meet this requirement.; 3.5.2 ;Calibration Checks. The purpose of calibration is to verify that the Aneroid Barometer is operational, and to certify that it indicates the actual pressure at any point over its full range with the required precision and accuracy. When being calibrated, the Aneroid Barometer shall be checked at the ambient air pressure, at the low and high design pressure point, and at a minimum of four other points on the scale. Calibration will be performed in both the low to high and high to low pressure directions. Calibration will be performed with the barometer dial oriented vertically; that is, in the same position as when the instrument is mounted on a bulkhead or wall. All standards and test instruments used in the calibration shall be in current calibration themselves.; 3.5.3 ;Calibration Labels or Tags. A tamper-resistant calibration label, or label and associated tag, shall be affixed so that it is visible and readable when the Aneroid Barometer is installed for normal operation. The calibration label or tag shall not obscure any indications or interfere with any controls of the instrument. The calibration label shall clearly, legibly, and indelibly indicate the organization that performed the calibration, the date the next calibration is due, and the serial number of the instrument.; 3.5.4 ;Calibration Seals. Access to any adjustments that affect the accuracy or precision of the Aneroid Barometer shall be sealed with tamper-resistent labels. The wording on these labels shall indicate that the calibration of the instrument is void if the seal is broken. Placement of the labels shall not obscure any indications or interfere with any controls of the barometer. Adjustments that are intended to be made by the user during operation of the barometer shall not be sealed.; 3.5.5 ;Calibration Reports. The calibrating activity shall provide a report of calibration with each calibrated barometer. The report shall include at least: ^the identification of the calibrating activity; ^the identication of the instrument calibrated including the serial number; ^the identification of all test and measuring instruments and standards used to calibrate the barometer, including the next calibration due date of each item; ^the identification of the calibration procedure used; ^the calibration date; ^ the next calibration due date; ^the type of calibration label or tag attached; ^the as-received condition, including any out of tolerance values and, ^the test values determined during calibration.; 3.5.6 ;Calibration Records. The calibrating activity shall maintain records sufficient to prove the nature of work performed and the ability to perform the work. All records shall be available to the government on request. The records shall include at least the calibration report as described in the previous paragraph, and information sufficient to prove the adequacy of the calibration procedures, the competency of the measurement systems (including personnel) to perform the measurements, and to prove traceabililty to national standards or independently verifiable natural physical constants. Calibration reports shall be retained at least twice as long as the calibration interval for the instrument. Other records should be retained for at least as long as they are required to provide the necessary documentation.; 3.6 ;Drawings. This standard covers repair of the Aneroid Barometer to conform to the requirements of an existing specification, MIL-B-17089A. It does not include manufacture of the barometer. Therefore, the government does not require any drawings for the purposes of this specification. However, the government may require documentation that materials used to repair the barometers conform to the material technical requirements.; 3.7 Marking - This item shall be physically identified in accordance with MIL-STD-130. 3.8 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 3.9 The contractor shall notify the Government testing activity ;5; days prior to shipment of material to be tested. 4. QUALITY ASSURANCE 4.1 ;Responsibility for Quality Management System. The contractor is responsible for performing all work in a qualilty management system that assures con- formance to quality and performance requirements. Contractors may choose to have their quality management system registered or certified under a third party quality management system assessment program. If so, evidence of current registration or certification shall be provided to the government, and changes in that status shall be promptly communicated to the contracting officer. The government reserves the right to perform and conduct any inspec- tions, tests, or measurements that are determined by the government to be necessary to verify conformance to quality and performance requirements.; 4.1.1 ;Quality Systems Requirements (Repair). The quality management system of the repair supplier shall be capable of assuring conformance to quality and performance requirements. A supplier that is currently registered by a third party assessor to have a quality management system conforming to the minimum requirements of ANSI/ISO/ASQC Q9001, ANSI/ISO/ASQC Q9002, or another equiva- lent standard (referenced under ""Legal Equivalence"") shall be deemed to meet this requirement. Government and military activities acting as repair sup- pliers shall be deemed to meet this requirement.; 4.1.2 ;Quality Systems Requirements (Calibration). The calibration supplier shall be competent to perform the calibration, and shall operate under a qualilty management system capable of assuring conformance to quality and performance requirements. A supplier that is currently registered by a third party assessor to be competent in the measurement area and to have a quality management system conforming to the minimum requirements of IEC/ISO Guide 25 shall be deemed to meet this requirement. Government and military calibration activities will be deemed to meet this requirement when certification by their cognizant authority is current.; 4.1.3 ;Government Audit of Quality Systems. The government may choose to verify the quality management system and calibration capability of a supplier at any time, by means of an on-site audit. The Government's quality management system verification audit may be based on the requirements of either ANSI/ISO/ASQC Q9001, ANSI/ISO/ASQC Q9002, or other applicable quality management systems standards. The Government may verify the technical measurement competency of calibration suppliers. The Government's verification audit may be based on the requirements of IEC/ISO Guide 25; or by examining the results of an interlaboratory measurement comparison program, or by other applicable methods.; 4.2 ;Testing. PreProduction testing as specified in paragraph 4.1.1. of MIL-B-17089Ais not normally required for repair work. Acceptance inspection as specified in paragraph 4.1.2. of MIL-B-17089A, when performed by the government, will normally be limited to Visual and Mechanical Inspection, and a check of thebarometer calibration accuracy and precision. ; 4.2.1 ;Acceptance Inspection. Acceptance inspection as described in the previous paragraph, will be performed on the first lot repaired by any vendor. A lot will consist of all barometers sent to the vendor for repair at one time. A random sample will be selected from the lot according to Table 1. If the lot size is one, or if the lot size is smaller than the sample size, then the entire lot will be inspected. Inspection for lot sizes greater than 90 shall use random sample sizes taken in accordance with ANSI/ASQCZ1.4 for inspection Level III, single sampling, and an acceptable quality level of 1.0%. See separate attached chart.; 4.2.2 ;Additional Inspections. The government may, at their discretion, perform acceptance inspection on a sample of any lot after the first.; 4.2.3 ;Handling of Acceptance Inspection Lots and Samples. The lot to be inspected will have a random sample taken from it by the Defense Contract Management Organization Quality Assurance Representative. The Contractor shall ship the selected sample of repaired and calibrated Aneroid Barometers to the In-Service Engineering Activity (ISEA). The Contractor will contact the ISEA at least five working days prior to the shipping date. The sample will be shipped by traceable means at the Contractor's expense. The samples will be inspected by the ISEA to determine conformance to requirements. Notice of acceptance or rejection of the lot will be provided to the Contracting Officer within ten (10) working days after receipt by the ISEA laboratory. If accepted, the ISEA will forward a letter, stating approval, to the Procurement Contracting Officer, at the Naval Inventory Control Point, Mechanicsburg, and the Contracting Officer will notify the Contractor of the acceptance. The ISEA will ship the items back to the Contractor, at Contractor expense. If the lot is rejected, any defective units must be reworked, and the entire lot shall be re-submitted for sampling and inspection.If the lot is rejected, a letter will also be forwarded as described above.; 4.2.4 ;ISEA Point of Contact. SPAWAR (Space and Naval Warfare Center) Systems Center, Charleston, Code J326 (Gary R. Gardner). Commercial telephone AC (843) 974-5373, facsimile AC (843) 974-4298.Effective 21 Feb 00, the telephone prefix has changed to 218.; 4.2.5 ;ISEA Shipping Address. SPAWAR (Space and Naval Warfare Center) Systems Center, Charleston, (ATTN: Code J326), One Innovation Drive, Building 3147, Hanahan, SC, 29406. MARK PACKAGE FOR: Environmental Effects Testing Laboratory Test Samples.; 4.3 Inspection System Requirements - The supplier shall provide and maintain an inspection/quality system acceptable to the Government. The inspection system requirements for this contract/purchase order shall be in accordance with MIL-I-45208. Suppliers certified to perform under ISO 9001 or ISO 9002 are granted permission to utilize the one desired in lieu of MIL-I-45208. 4.4 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.5 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 4.6 Production Lot Test (Government) - The Contractor shall deliver ;the Lot Size to the required Sample Size, see Table I of Attachment A; unit(s) to ;SPAWAR Systems Center, Charleston, ATTN: Code J326, One Innovation Drive, Building 3147, Hanahan, SC, 29406. Mark package ""Environmental Effects Testing Laboratory Test Samples""; for production lot testing in accordance with ;this competitive repair technical data package; . Government production lot tests shall consist of ;non-destructive; testing. If testing is nondestructive, production lot sample(s) ;shall; be returned. 4.6.1 ;The cost of the Production Lot Testing will be $3,750.00 per production lot.; 4.6.2 ;The Production Lot Testing will be non-destructive.; 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. 5.2 ;Packaging. When being shipped or transported, the Aneroid Barometer shall be well packaged according to standard industry practices. The packaging materials and methods shall be adequate to assure the barometer will be received at the ultimate destination in a clean, dry, undamaged, and in operable condition. The packaging shall be able to withstand all normal handling encountered in land, air, or sea shipping, including handling by automated sorting machinery and transportation in unpressurized aircraft. The packaging shall be capable of being stored out doors in all climates without allowing damage to the enclosed barometer.; 5.3 ;Marking. The packaging shall be clearly, legibly and indelibly marked with the address of the shipper and the destination, applicable contract and tracking numbers, other information that is customary standard practice for the shipper, and other information that may be required by the specific contract or purchase order.; MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for ""Official Use Only"" and ""NOFORN"" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVSUP-WSS Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue: Commanding Officer NAVSUP-WSS Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Commanding Officer NAVSUP-WSS Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS. 6.2 ;Legal Equivalence. ANSI/ISO/ASQC Q9001 and ANSI/ISO/ASQC Q9002 are the United States' legal equivalent of the International ISO 9001 and ISO 9002 quality system standards. While the specified version is preferred, either version of the standards, or the legal equivalent standards of other allied nations may be used with equal validity. Other equivalent quality system standards are the automotive industry QS-9000 Quality System Requirements, and the aero-space industry, AS9000, Aerospace Basic Quality System Standard, as both of those fully incorporate Q9001.; 6.3 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a ""Distribution Statement"" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings. There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows: A... approved for public release; distribution is unlimited. B... distribution authorized to US Go...
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/1cf3c62bd7e146758b92c2f2ca8fecb6/view)
 

Record

SN06185371-F 20211126/211124230120 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |