SAMDaily.us | PRESOL | 17 | Truck Tank Repair//R-11 Refueler

SAMDAILY.US - ISSUE OF DECEMBER 18, 2021 SAM #7322
SOLICITATION NOTICE

17 -- Truck Tank Repair//R-11 Refueler

Notice Date: 12/16/2021 9:50:38 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 488490 — Other Support Activities for Road Transportation
Contracting Office: FA4830 23 CONS CC MOODY AFB GA 31699-1700 USA
ZIP Code: 31699-1700
Solicitation Number: FA483022QZ003
Response Due: 1/5/2022 8:00:00 AM
Archive Date: 01/20/2022
Point of Contact: Eulalia D. Belin, Phone: 2292574704, Jessica Owens, Phone: 2292571502
E-Mail Address: eulalia.belin@us.af.mil, jessica.owens.5@us.af.mil
(eulalia.belin@us.af.mil, jessica.owens.5@us.af.mil)
Description: �Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.� The RFI number for any resulting procurement will be FA4830-22-Q-Z003. This RFI document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2022-01, Defense Acquisition Circular (DPN) 11/30/2021, and Air Force Acquisition Circular (AFAC) 2021-0726.� The North American Industry Classification System is 488490.� The size standard is $8.0M SOLICITATION #: FA483022QZ003.� This solicitation is issued as a Request For Information DESCRIPTION: �Quantity: 1 Tank Repair/R-11 Refueler Truck Statement of Work: Degas tank, lift tank from truck frame. Remove reinforcement angle and adhesive from all sides, drain sump. Locate and repair leaks as needed on drain sump. Test repairs. Weld angle reinforcement all the way around bottom edge of sump and retest. Reinstall tank on truck frame. Dry out tank and replace gaskets as needed.� ll work must be done by certified welders and shop must have all licenses and permits for degas of fuel tank. TO 31-1-191 1.7.2.133 Qualified vs. Certified Welder. A qualified welder is a task qualified welder. A certified welder is a person who has completed a welder�s training course and possesses one or more of the following: ??Certification from American Welding Society. ??Certification for Aircraft Welders in accordance with TO 00-25-252. ??Certification from a third party that weld samples have been destructively inspected and found acceptable. Provisions Incorporated by Reference 52.204-7 � System for Award Management (Oct 2018) 52.204-16 � Commercial and Government Entity Code Reporting (Aug 2020) 52.204-17 � Ownership or Control of Offeror (Aug 2020) 52.204-20 � Predecessor of Offeror (Aug 2020) 52.204-24 � Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021) 52.209-2 � Prohibition on Contracting with Inverted Domestic Corporations-Representation (Nov 2015) 52.212-1 � Instructions to Offerors � Commercial Items (Nov 2021) 52.212-3 � Offeror Representations and Certifications � Commercial Items (Nov 2021) 52.219-1 � Small Business Program Representations (Sep 2021) 52.222-22 � Previous Contracts and Compliance Reports (Feb 1999) 52.222-25 � Affirmative Action Compliance (Apr 1984) 52.225-25 � Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications (Jun 2020) Provisions Incorporated by Full Text 52.212-2 - Evaluation-Commercial Items (Nov 2021) �(a)�The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other�factors�considered. The following�factors�shall be used to evaluate offers: Lowest Price Technically Acceptable To be determined technically acceptable offerors must meet all requirements of the SOW �(End of provision) Clauses Incorporated by Reference 52.204-10 - Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) 52.204-13 � System for Award Management Maintenance (Oct 2018) 52.204-18 � Commercial and Government Entity Code Maintenance (Aug 2020) 52.204-25 - Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021) 52.209-6 - Protecting Government�s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Nov 2021) 52.209-10 - Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015) 52.212-4 - Contract Terms and Conditions �Commercial Items (Nov 2021) 52.219-6 � Notice of Total Small Business Set-Aside (Nov 2020) 52.219-28 � Post-Award Small Business Program Representation (Sep 2021) 52.222-50 � Combating Trafficking in Persons (Nov 2021) 52.223-18 - Encouraging contractor Policies To Ban Text Messaging While Driving (Jun 2020) 52.232-33 - Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) 52.232-39 - Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 - Providing Accelerated Payments to Small Business Subcontractors (Nov 2021) 52.233-1 - Disputes (May 2014) 252.203-7000 � Requirements Relating to Compensation of Former DOD Officials (Sep 2011) 252.203-7002 - Requirement to Inform Employees of Whistleblower Rights (Sep 2013) 252.203-7005 - Representation Relating to Compensation of Former DOD Officials (Nov 2011) 252.204-7012 - Safeguarding Covered Defense Information and cyber Incident Reporting (Dec 2019) 252.225-7001 - Buy American Act and Balance of Payments Program (Dec 2017) 252.247-7023 Transportation of Supplies by Sea (Feb 2019) Clauses Incorporated by Full Text 252.211-7003 - Item Unique Identification and Validation (Mar 2016) �(a)��Definitions.��As used in this clause� ��Automatic identification device��means a device, such as a reader or interrogator, used to retrieve data encoded�on machine-readable media. ��Concatenated unique item�identifier� means� ��(1)��For�items that are serialized within the enterprise identifier,�the linking�together of the unique identifier�data elements in order of�the�issuing agency code, enterprise identifier, and unique serial number�within the enterprise identifier; or ��(2)� For items that are�serialized within the original part, lot, or batch number, the linking together�of the unique identifier�data elements in order of the issuing agency code;�enterprise identifier; original part, lot, or batch number;�and�serial�number within the original part, lot, or batch number. ��Data matrix� means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. ��Data qualifier� means a specified�character (or string of characters) that immediately precedes a data field that�defines the general category or intended use of the data that follows. ��DoD recognized unique�identification equivalent� means a unique identification method that is in�commercial use and has been recognized by DoD.��All DoD recognized unique identification equivalents are listed at�http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. ��DoD item unique identification� means a system of marking items delivered to�DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.� ��Enterprise� means the entity (e.g., a�manufacturer or vendor) responsible for assigning unique item identifiers to�items. ��Enterprise�identifier� means a code that is�uniquely assigned to an enterprise by an issuing agency. ��Government�s unit acquisition�cost� means� ��(1)��For fixed-price type line, subline, or�exhibit line items, the unit price identified in the contract at the time of�delivery; ��(2)��For cost-type or undefinitized line, subline,�or exhibit line items, the Contractor�s estimated fully burdened unit cost to�the Government at the time of delivery; and ��(3)��For items produced under a time-and-materials�contract, the Contractor�s estimated fully burdened unit cost to the Government�at the time of delivery. ��Issuing agency� means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at�http://www.aimglobal.org/?Reg_Authority15459.� ��Issuing agency code� means a code�that designates the registration (or controlling) authority for the enterprise�identifier. ��Item� means a single hardware�article or a single unit formed by a grouping of subassemblies, components, or�constituent parts.� ��Lotor batch number� means an identifying number assigned by the enterprise to a�designated group of items, usually referred to as either a lot or a batch, all�of which were manufactured under identical conditions. ��Machine-readable� means an�automatic identification technology media, such as bar codes, contact memory�buttons, radio frequency identification, or optical memory cards. ��Original part number� means a�combination of numbers or letters assigned by the enterprise at item creation�to a class of items with the same form, fit, function, and interface. ��Parent item� means the item�assembly, intermediate component, or subassembly that has an embedded item with�a unique item identifier or DoD recognized unique identification equivalent. �� Serial number within the�enterprise identifier� means a combination of numbers, letters, or symbols�assigned by the enterprise to an item that provides for the differentiation of�that item from any other like and unlike item and is never used again within�the enterprise. ��Serial number within the part,�lot, or batch number� means a combination of numbers or letters assigned by the�enterprise to an item that provides for the differentiation of that item from�any other like item within a part, lot, or batch number assignment. ��Serialization within the�enterprise identifier� means each item produced is assigned a serial number�that is unique among all the tangible items produced by the enterprise and is�never used again.��The enterprise is�responsible for ensuring unique serialization within the enterprise identifier. ��Serialization within the part,�lot, or batch number� means each item of a particular part, lot, or batch�number is assigned a unique serial number within that part, lot, or batch�number assignment.��The enterprise is�responsible for ensuring unique serialization within the part, lot, or batch�number within the enterprise identifier. ��Type designation� means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. ��Unique item identifier� means a�set of data elements marked on items that is globally unique and unambiguous.��The term includes a concatenated unique item�identifier or a DoD recognized unique identification equivalent. ��Unique item identifier type��means a designator to indicate which method of uniquely identifying a part has�been used.��The current list of accepted�unique item identifier types is maintained at�http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. ��(b)��The Contractor shall deliver all items under a contract line, subline,�or exhibit line item. ��(c)��Unique item identifier. ��(1)��The Contractor shall provide a unique item�identifier for the following: ��(i)��Delivered items for which the Government�s unit acquisition cost is $5,000 or more, except for the following line items:�� Contract�Line, Subline, or�� Exhibit�Line Item Number��Item�Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ��(ii)��Items for which the Government�s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract�Line, Subline, or�� Exhibit�Line Item Number��Item�Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (If items are identified in the Schedule, insert �See Schedule in this table.) ��(iii)��Subassemblies, components, and parts embedded within delivered�items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____. ��(iv)��Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____. ��(v)��Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability. ��(2)��The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.� ��(3)��The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology � International symbology specification � Data matrix; ECC200 data matrix specification.� ��(4)��Data syntax and semantics of unique item identifiers.��The Contractor shall ensure that� ��(i)��The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: ��(A)��Application Identifiers (AIs) (Format�Indicator 05 of ISO/IEC International Standard 15434), in accordance with�ISO/IEC International Standard 15418, Information Technology � EAN/UCC�Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH�10.8.2 Data Identifier and Application Identifier Standard. ��(B)��Data Identifiers (DIs) (Format Indicator 06�of ISO/IEC International Standard 15434), in accordance with ISO/IEC�International Standard 15418, Information Technology � EAN/UCC Application�Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data�Identifier and Application Identifier Standard. ��(C)��Text Element Identifiers (TEIs) (Format�Indicator 12 of ISO/IEC International Standard 15434), in accordance with the�Air Transport Association Common Support Data Dictionary; and ��(ii)��The encoded data elements of the unique item�identifier conform to the transfer structure, syntax, and coding of messages�and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC�International Standard 15434, Information Technology � Transfer Syntax for High�Capacity Automatic Data Capture Media. ��(5)��Unique�item identifier. ��(i)��The Contractor shall� ��(A)��Determine whether to� ��(1)��Serialize within the enterprise identifier;� ��(2)��Serialize within the part, lot, or batch number; or ��(3)��Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and� ��(B)��Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch�number) on items requiring marking by paragraph (c)(1) of this clause, based on the�criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;� ��(C)��Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and ��(D)��Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. ��(ii)��The issuing agency code� ��(A)��Shall not be placed on the item; and ��(B)��Shall be derived from the data qualifier for�the enterprise identifier. ��(d)��For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: ��(1)��Unique item identifier. ��(2)��Unique item identifier type. ��(3)��Issuing agency code (if concatenated unique�item identifier is used). ��(4)��Enterprise�identifier (if concatenated unique item identifier is used). ��(5)��Original part number (if there is�serialization within the original part number). ��(6)��Lot�or batch�number (if there is serialization within the lot or batch number). ��(7)��Current part number (optional and only if not�the same as the original part number). ��(8)��Current part number effective date (optional�and only if current part number is used). ��(9)��Serial number (if concatenated unique item�identifier is used). ��(10)��Government�s unit acquisition cost. ��(11)��Unit of measure. ��(12)��Type designation of the item as specified in the contract schedule, if any. ��(13)��Whether the item is an item of Special Tooling or Special Test Equipment. ��(14)��Whether the item is covered by a warranty. ��(e)��For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: ��(1)��Unique item identifier of the parent item�under paragraph (c)(1) of this clause that contains the embedded subassembly,�component, or part. ��(2)��Unique item identifier of the embedded�subassembly, component, or part. ��(3)��Unique item identifier type.** ��(4)��Issuing agency code (if concatenated unique�item identifier is used).** ��(5)��Enterprise identifier (if concatenated unique item identifier is used).** ��(6)��Original part number (if there is serialization within the original part�number).** ��(7)��Lot�or batch�number (if there is serialization within the lot or batch number).** ��(8)��Current part number (optional and only if not�the same as the original part number).** ��(9)��Current part number effective date (optional�and only if current part number is used).** ��(10)��Serial number (if concatenated unique item�identifier is used).** ��(11)��Description. ** Once�per item. ��(f)��The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: ��(1)��End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at�252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at�http://dodprocurementtoolbox.com/site/uidregistry/.� ��(2)��Embedded items shall be reported by one of the following methods�� (i)��Use of the embedded items capability in WAWF; ��(ii)��Direct data submission to the IUID Registry following the procedures and formats at�http://dodprocurementtoolbox.com/site/uidregistry/; or� ��(iii)��Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. ��(g)��Subcontracts.��If the Contractor acquires by subcontract, any item(s) for which�item unique identification is required in accordance with paragraph (c)(1) of this clause,�the Contractor shall include this clause, including this paragraph (g), in the applicable�subcontract(s), including subcontracts for commercial items.� (End of clause) 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders (Nov 2021) �(a)�The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of�commercial products and commercial services: ��(1)�52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements�(Jan 2017)�(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). ��(2)�52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities�(Nov 2021)�(Section 1634 of Pub. L. 115-91). ��(3)�52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.�(Nov 2021)�(Section 889(a)(1)(A) of Pub. L. 115-232). ��(4)�52.209-10, Prohibition on Contracting with Inverted Domestic Corporations�(Nov 2015). ��(5)�52.233-3, Protest After Award�(Aug 1996)�(31�U.S.C.�3553). ��(6)�52.233-4, Applicable Law for Breach of Contract Claim�(Oct 2004)�(Public Laws 108-77 and 108-78 (�19�U.S.C.�3805�note)). ��(b)�The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of�commercial products and commercial services: ��[Contracting Officer check as appropriate.] ��__�(1)�52.203-6, Restrictions on Subcontractor Sales to the Government�(Jun 2020),�with�Alternate I�(Nov 2021)�(41�U.S.C.�4704�and�10�U.S.C.�2402). ��__�(2)�52.203-13, Contractor Code of Business Ethics and Conduct�(Nov 2021)�(41�U.S.C.�3509)). ��__�(3)�52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009�(Jun 2010)�(Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) ��__�(4)�52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards�(Jun 2020)�(Pub. L. 109-282) (�31�U.S.C.�6101�note). ��__�(5)�[Reserved]. ��__�(6)�52.204-14, Service Contract Reporting Requirements�(Oct 2016)�(Pub. L. 111-117, section 743 of Div. C). ��__�(7)�52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts�(Oct 2016)�(Pub. L. 111-117, section 743 of Div. C). ��__�(8)�52.209-6, Protecting the Government�s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment.�(Nov 2021)�(31�U.S.C.�6101�note). ��__�(9)�52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters�(Oct 2018)�(41�U.S.C.�2313). ��__�(10)�[Reserved]. ��__�(11)�52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award�(Sep 2021)�(15�U.S.C.�657a). ��__�(12)�52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns�(Sep 2021)�(if the offeror elects to waive the preference, it shall so indicate in its offer) (15�U.S.C.�657a). ��__�(13)�[Reserved] ��__�(14)� (i)�52.219-6, Notice of Total Small Business Set-Aside�(Nov 2020)�(15�U.S.C.�644). ��__�(ii)�Alternate I�(Mar 2020)�of�52.219-6. ��__�(15)� (i)�52.219-7, Notice of Partial Small Business Set-Aside�(Nov 2020)�(15�U.S.C.�644). ��__�(ii)�Alternate I�(Mar 2020)�of�52.219-7. ��__�(16)�52.219-8, Utilization of Small Business Concerns�(Oct 2018)�(15�U.S.C.�637(d)(2)�and (3)). ��__�(17)� (i)�52.219-9, Small Business Subcontracting Plan�(Nov 2021)�(15�U.S.C.�637(d)(4)). ��__�(ii)�Alternate I�(Nov 2016)�of�52.219-9. ��__�(iii)�Alternate II�(Nov 2016)�of�52.219-9. ��__�(iv)�Alternate III�(Jun 2020)�of�52.219-9. ��__�(v)�Alternate IV�(Sep 2021)�of�52.219-9. ��__�(18)� (i)�52.219-13, Notice of Set-Aside of Orders�(Mar 2020)�(15�U.S.C.�644(r)). ��__�(ii)�Alternate I�(Mar 2020)�of�52.219-13. ��__�(19)�52.219-14, Limitations on Subcontracting�(Sep 2021)�(15�U.S.C.�637s). ��__�(20)�52.219-16, Liquidated Damages�Subcontracting Plan�(Sep 2021)�(15�U.S.C.�637(d)(4)(F)(i)). ��__�(21)�52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside�(Sep 2021)�(15�U.S.C.�657f). ��__�(22)� (i)�52.219-28, Post Award Small Business Program Rerepresentation�(Sep 2021)�(15�U.S.C.�632(a)(2)). ��__�(ii)�Alternate I�(Mar 2020)�of�52.219-28. ��__�(23)�52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns�(Sep 2021)�(15�U.S.C.�637(m)). ��__�(24)�52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program�(Sep 2021)�(15�U.S.C.�637(m)). ��__�(25)�52.219-32, Orders Issued Directly Under Small Business Reserves�(Mar 2020)�(15�U.S.C.�644(r)). ��__�(26)�52.219-33, Nonmanufacturer Rule�(Sep 2021)�(15U.S.C. 637(a)(17)). ��__�(27)�52.222-3, Convict Labor�(Jun 2003)�(E.O.11755). ��__�(28)�52.222-19, Child Labor-Cooperation with Authorities and Remedies�(Jan2020)�(E.O.13126). ��__�(29)�52.222-21, Prohibition of Segregated Facilities�(Apr 2015). ��__�(30)� (i)�52.222-26, Equal Opportunity�(Sep 2016)�(E.O.11246). ��__�(ii)�Alternate I�(Feb 1999)�of�52.222-26. ��__�(31)� (i)�52.222-35, Equal Opportunity for Veterans�(Jun 2020)�(38�U.S.C.�4212). ��__�(ii)�Alternate I�(Jul 2014)�of�52.222-35. ��__�(32)� (i)�52.222-36, Equal Opportunity for Workers with Disabilities�(Jun 2020)�(29�U.S.C.�793). ��__�(ii)�Alternate I�(Jul 2014)�of�52.222-36. ��__�(33)�52.222-37, Employment Reports on Veterans (Jun 2020) (38�U.S.C.�4212). ��__�(34)�52.222-40, Notification of Employee Rights Under the National Labor Relations Act�(Dec 2010)�(E.O. 13496). ��__�(35)� (i)�52.222-50, Combating Trafficking in Persons�(Nov 2021)�(22�U.S.C.�chapter�78�and E.O. 13627). ��__�(ii)�Alternate I�(Mar 20Buy American-Supplies�(Nov 2021)�(41�U.S.C.�chapter�83). ��__�(49)� (i)�52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act�(Nov 2021)�(41�U.S.C.chapter83,�19�U.S.C.�3301�note,�19�U.S.C.�2112�note,�19�U.S.C.�3805�note,�19�U.S.C.�4001�note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. ��__�(ii)�Alternate I�(Jan�2021)�of�52.225-3. ��__�(iii)�Alternate II�(Jan�2021)�of�52.225-3. ��__�(iv)�Alternate III�(Jan�2021)�of�52.225-3. ��__�(50)�52.225-5, Trade Agreements�(Oct 2019)�(19�U.S.C.�2501,�et seq.,�19�U.S.C.�3301�note). ��__�(51)�52.225-13, Restrictions on Certain Foreign Purchases�(Feb 2021)�(E.O.�s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ��__�(52)�52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008;�10�U.S.C. 2302Note). ��__�(53)�52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov2007) (42�U.S.C.�5150). ��__�(54)�52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) (42�U.S.C.�5150). ��__�(55)�52.229-12, Tax on Certain Foreign Procurements�(Feb 2021). ��__�(56)�52.232-29, Terms for Financing of Purchases of�Commercial Products and Commercial Services�(Nov 2021)�(41�U.S.C.�4505,�10�U.S.C.�2307(f)). ��__�(57)�52.232-30, Installment Payments for�Commercial Products and Commercial Services�(Nov 2021)�(41�U.S.C.�4505,�10�U.S.C.�2307(f)). ��__�(58)�52.232-33, Payment by Electronic Funds Transfer-System for Award Management�(Oct2018)�(31�U.S.C.�3332). ��__�(59)�52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31�U.S.C.�3332). ��__�(...
Web Link: SAM.gov Permalink
(https://sam.gov/opp/5acb4ffcd20f4643b0a8012491891bd9/view)
Place of Performance: Address: USA; Country: USA
Record: SN06199361-F 20211218/211216230118 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

17 -- Truck Tank Repair//R-11 Refueler