SOURCES SOUGHT
69 -- Sources Sought Notice for H-1 Training Device Modernization Program Procurement, Upgrades to AH-1Z and UH-1Y Flight Training Devices
- Notice Date
- 12/21/2021 12:55:54 PM
- Notice Type
- Sources Sought
- NAICS
- 333318
— Other Commercial and Service Industry Machinery Manufacturing
- Contracting Office
- NAWC TRAINING SYSTEMS DIV ORLANDO FL 32826-3224 USA
- ZIP Code
- 32826-3224
- Solicitation Number
- N6134022R0030
- Response Due
- 1/10/2021 9:00:00 AM
- Point of Contact
- Richard Steinfeld, Phone: 4073808022
- E-Mail Address
-
richard.h.steinfeld.civ@us.navy.mil
(richard.h.steinfeld.civ@us.navy.mil)
- Description
- INTRODUCTION The Naval Air Warfare Center Training Systems Division (NAWCTSD) Orlando, FL seeks potential sources for the upgrade and modernization of sixteen existing AH-1Z and UH-1Y Flight Training Devices (FTD).� The following devices for this effort are part of the H-1 Training Device Modernization Program, also known as the H-1 Lot 7 and 8 Upgrades:� 1.���������� 2F197B-2 AH-1Z FTD; New River, NC 2.���������� 2F196-1 UH-1Y FTD; New River, NC 3.���������� 2F226-1 UH-1Y FTD; New River, NC 4.���������� 2F227-1 AH-1Z FTD; K-Bay, HI 5.���������� 2F196B-3 UH-1Y FTD; K-Bay, HI 6.���������� 2F226-2 UH-1Y FTD; Belle Chasse LA 7.���������� 2F196B-4 UH-1Y FTD; McGuire, NJ 8.���������� 2F197-1 AH-1Z FTD; Pendleton, CA 9.���������� 2F227-2 AH-1Z FTD; New River, NC 10.�������� 2F206-1 UH-1Y FTD; Pendleton, CA 11.�������� 2F215-1 AH-1Z FFS; Pendleton, CA 12.�������� 2F196B-2 UH-1Y FTD; Pendleton, CA 13.�������� 2F227-5 AH-1Z FTD; Futenma, JP 14.�������� 2F226-3 UH-1Y FTD; Futenma, JP 15.�������� 2F227-4 AH-1Z FTD; Belle Chasse, LA 16.�������� 2F227-3 AH-1Z FTD; McGuire, NJ In general, all devices will receive extensive modifications to increase training systems supportability and aircraft concurrency, reduce total life cycle support costs and obsolescence, and enhance flight crew training.� The contractor tasked to do this effort shall organize, coordinate, and control the program activities to ensure compliance with the all contract requirements and the timely delivery of the required product and services for all devices at their locations.� The contractor shall provide the necessary program management, systems engineering, design engineering, materials, services, equipment, facilities, testing, technical, logistics, manufacturing, travel, and clerical support for the effort.� Responses received for this notice will serve as consideration for acquisition planning purposes. SPECIFIC REQUIREMENTS All devices will receive modifications consisting of upgrades and modernizations for the following subsystems and components: Display system projectors Image Generator (IG) Synthetic environment visual and sensor database and moving models Refurbishment of display system collimating mirrors for select devices Cockpit electromagnetic mapping New Instructor Operator Station (IOS) monitors and software Replacement of Cockpit Multi-Function Displays with touchscreen functionality for the IOS operation New Cockpit Monitoring System (CMS) New cockpit cameras Replacement or upgrade of control loading actuators Motion Analysis Report for Six Degree of Freedom (DOF) secondary motion system Upgrade of all Computational Systems hardware and software operating systems Installation of Daily Operational Readiness Test Improved wind modelling/simulation flight characteristics over various terrains for specific missions. Improved Reduced Visibility Landing (RVL)/Brownout modelling and simulation Addition of capabilities for LINK-16 military tactical data link The UH-1Y 2F196-1 FTD at New River will receive a visual system analysis to determine if it is feasible to upgrade the displays system collimating mirrors from Mylar� to glass substrate and perform modification to the Input/Output subsystem. The UH-1Y 2F196B-3 FTD at K-Bay will receive refurbishment of the display system collimating mirrors. The AH-1Z FTD, Device 2F227-2, will receive refurbishment of the real image display screen surface coating. The AH-1Z 2F215-1 Full Flight Simulator (FFS) at Camp Pendleton will require the removal of the six DOF platform motion system and fixture of the FTD onto fixed base. The AH-1Z and UH-1Y devices 2F196-1, 2F196B-2, 2F196B-3, 2F196B-4, 2F206-1, 2F226-1, 2F226-2, 2F197-1, 2F197B-2, 2F215-1, and 2F227-1shall receive upgrades to the Automated Test Guide (ATG). TRAINING DEVICES SCHEDULE The schedule below is notional and based on a contract award in October 2022.� Upon award, a Baseline Configuration Audit (BCA) will be conducted for each location.� The design phase will begin at the Systems Requirement Review (SRR) and end at the Critical Design Review (CDR).� Each device is expected to have multiple trainer downtimes for upgrades based on the prioritization and scheduling within the IPT.� Each scheduled trainer downtime for upgrades will include a Pre-Modification Inspection (PMI), Contractor Preliminary testing (DT-C1), and the Integrated Final Inspection (IT-C1).� Toward the end of the Period of Performance, a Final and Physical Configuration Audit (FCA/PCA) will be conducted followed by the Initial Operational Capability (IOC) support for all devices.� ELIGIBILITY The applicable NAICS code for this requirement is 333318 (Other Commercial and Service Industry Machinery Manufacturing) which carries a small business size standard of 1,000 employees. �The Product Service Code (PSC) is 6910. �Any interested parties must submit a capability statement stating what experience they have with similar efforts and if they are able to accommodate this effort within the required timeline and schedule outlined above.� Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement.� For additional information requested specifically from small businesses, see �submission details� below. � SUBMISSION DETAILS Written responses to this announcement should specifically address the following. �Responses should be succinct, but sufficient in detail to adequately demonstrate the required capability to meet the Government�s stated requirements. The Government intends to utilize the data collected from this announcement to finalize the acquisition strategy. Information about your company: Name and address of the company Cage Code Size of business and if applicable to any small business classification Names of two points of contact, including title and telephone number Company Resources: A discussion of your company�s capabilities to meet the Government�s training device requirements.� Please provide supporting rationale for your response to include a discussion of manufacturing capacity, resources, and facilities that will be employed to meet ALL the requirements in the SPECIFIC REQUIREMENTS and TRAINING DEVICES SCHEDULE section shown above. Wind modelling/simulation flight characteristics over various terrains: A discussion of your company�s capabilities and experience providing wind modelling flight characteristics over various terrains. Reduced Visibility Landing/Brownout modelling/simulation: A discussion of your company�s capabilities, products, and experience providing particle-based, physics-driven reduced visibility landing/brownout modelling and simulation. Identify projects in which your company�s product has been integrated and fielded with a DOD training device. For Small Businesses: If you are a small business interested in being the prime contractor for this effort, please be advised that the FAR 52.219-14 Limitations on Subcontracting clause has changed. Deviation 2021-O0008 is now in effect which includes the definition of �Similarly Situated Entity� and provides a revised methodology for the 50% calculation for compliance with the clause. Small business primes may count �first tier subcontracted� work performed by similarly situated entities as if it were performed by the prime itself. Please read the full text of the clause deviation (52.219-14 Class Deviation 2021-O0008 dated 09/10/21 at https://www.acq.osd.mil/dpap/policy/policyvault/USA001770-21-DPC.pdf). To assist in our market research and determination of any applicable small business set-aside for this effort, if you are a small business interested in priming this effort and plan to utilize �similarly situated entities� to meet the Limitations on Subcontracting, please identify the name & CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned similarly situated entity should be included in answering any questions outlined in the notice in order to assist the Government�s capability determination. NOTE:� Where applicable, include the following information: Government contract number Contract value Role your company played (prime contractor, sub-contractor) All responses shall be submitted by email to Mr. Richard Steinfeld (richard.h.steinfeld.civ@us.navy.mil) �no later than 12 PM Eastern Standard Time (EST) on Monday, 10 January 2022. Verbal submissions via phone will not be honored. Information and materials submitted in response to this request WILL NOT be returned. Classified material SHALL NOT be submitted. DISCLAIMER THIS SOURCE SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. GOING FORWARD, ALL NEW ENTITIES REGISTERING IN GSA�S SYSTEM FOR AWARD MANAGEMENT (SAM), AS WELL AS EXISTING REGISTRATIONS BEING UPDATED OR RENEWED, WILL REQUIRE THE SUBMISSION OF AN ORIGINAL, SIGNED NOTARIZED LETTER IDENTIFYING THE AUTHORIZED ENTITY ADMINISTRATOR FOR THE ENTITY ASSOCIATED WITH THE DATA UNIVERSAL NUMBERING SYSTEM (DUNS) NUMBER BEFORE THE REGISTRATION WILL BE ACTIVATED.� IT IS RECOMMENDED THAT ALL INTERESTED PARTIES BE AWARE THAT PROCESSING THIS ADDITIONAL INFORMATION MAY TAKE SEVERAL DAYS AND ARE PROACTIVE IN MAINTAINING THE SAM REGISTRATIONS IN AN �ACTIVE� STATUS AS THE GOVERNMENT CANNOT AWARD TO AN ENTITY WITHOUT AN �ACTIVE� SAM REGISTRATION.� MORE INFORMATION CAN BE FOUND AT WWW.GSA.GOV/SAMUPDATE.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/6f1bb601fafc4397aeb57e196f303db3/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN06203177-F 20211223/211221230120 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |