SOLICITATION NOTICE
Z -- Whitney Power House Glazed Wall Restoration
- Notice Date
- 1/14/2022 8:57:15 AM
- Notice Type
- Solicitation
- NAICS
- 236210
— Industrial Building Construction
- Contracting Office
- US ARMY ENGINEER DISTRICT FT WORTH FORT WORTH TX 76102-6124 USA
- ZIP Code
- 76102-6124
- Solicitation Number
- W9126G22R0053
- Response Due
- 2/4/2022 12:00:00 PM
- Archive Date
- 02/19/2022
- Point of Contact
- Sequoria Wilson, Phone: 817-886-1111, Robert M. Duran, Phone: 817-886-1070
- E-Mail Address
-
sequoria.l.wilson@usace.army.mil, robert.m.duran@usace.army.mil
(sequoria.l.wilson@usace.army.mil, robert.m.duran@usace.army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This project includes the removal of existing single-pane glass units and existing paint system to base steel. Existing paint contains lead and will require specialized removal and disposal as defined in specifications. Removal and disposal of lead contaminated debris shall be in compliance with Society for Protective Coatings (SSPC) GUIDE 6 and Society for Protective Coatings (SSPC) Guide 7 which can be found at www.sspc.org . Corrosion and pack rust shall be removed from the steel structure and edges of the built-up members shall be seal welded. Debris in openings of built-up members of wall and doors shall be removed. Pins in the door hinges shall be removed and the hinges disassembled to be cleaned from paint, pack rust and corrosion. Welds of the door hinges shall be tested for cracks using Non-Destructive Test (NDT)methods. If the welds are deemed unacceptable, they shall be grinded out and re-welded. Door latch systems shall also be disassembled, and removed of any paint, pack rust and corrosion. Openings at ends of built-up members shall be closed with steel plates welded on to prevent future debris build-up. Weep holes shall be drilled at specified locations on built-up members. Each door shall be profiled such that it does not make contact with the wall frame when being opened and closed. Door latch insert holes shall be modified to allow door to be latched when fully closed without slamming or excessive manipulation of doors. Doors when fully closed and latching rods extended shall have minimal movement. The door hinges and latching systems shall be re-assembled, reinstalled and lubricated after paint, corrosion, and rust are completely removed. The steel wall and door structures, including hinges and latching systems, shall be repainted with a new paint system. New single-pane safety glass units shall be installed in place of existing glazing. The bottom two rows of glass units in the wall and doors shall be laminated safety glass to protect power plant personnel. Paint shall be retouched as necessary to provide an adequate coating. Weep holes shall be cleaned out if new paint is clogging exits. Options to the contract will be installing a single-point lubrication system at a specified location and using laminate reinforcing for all new glass units. This magnitude of construction of the proposed work is between $500,000 - $1,000,000 in accordance with (IAW) FAR 36.204.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/4bfe54df81b24c38b0fcb40540af4077/view)
- Place of Performance
- Address: Clifton, TX 76634, USA
- Zip Code: 76634
- Country: USA
- Zip Code: 76634
- Record
- SN06218099-F 20220116/220114230102 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |