SOLICITATION NOTICE
56 -- Bridge Kits
- Notice Date
- 1/31/2022 2:33:41 PM
- Notice Type
- Solicitation
- NAICS
- 321992
— Prefabricated Wood Building Manufacturing
- Contracting Office
- USDA-FS, CSA SOUTHWEST 7 Albuquerque NM 871023498 USA
- ZIP Code
- 871023498
- Solicitation Number
- 127EAX22Q0003
- Response Due
- 2/14/2022 2:00:00 PM
- Archive Date
- 03/01/2022
- Point of Contact
- Daniel Franco, Phone: 520-388-8312
- E-Mail Address
-
daniel.franco@usda.gov
(daniel.franco@usda.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The Carson National Forest is seeking a Vendor to furnish two (2) timber bridge kits to the Carson National Forest at 208 Cruz Alta Road, Taos, NM 87571. The Vendor shall furnish complete Bridge Kits as follows to include timber running planks, deck planks, timber railing, and wood curb gaurds per the attached Specifications and Bid Schedule as follows: Existing Geometry: Pot Creek Original Bridge Geometry: 19� 10� Span x 16� 0� Width x 0 Degree Skew Hodges Original Bridge Geometry: 22� 0� Span x 14� 0� Width x 0 Degree Skew Base Bid New Geometry: Pot Creek Bridge Kit � 20� 8� Span x 17� 9� Width x 0 Degree Skew 4 � Glued-laminated Panel, 6-3/4� x 4� x 17�-9� (actual dimensions � includes 10-3/4� overhang on each side) 1 � Glued-laminated Panel, 6-3/4� x 4�-8� x 17�-9� (actual dimensions � includes 10-3/4� overhang on each side) 15 � Running planks, 3�x12� (nominal). If treatment is considered, specify a waterborne preservative. Beveling of plank ends at approaches reduces vehicle impact forces and improves performance and longevity. Attach the running planks to the deck using spikes or lag screws. Do not use bolts. 2 � Glued-laminated curbs, 10 �� x 6-3/4� x 21�-8� (Curbs must meet at least TL1 specifications) 10 � Glued-laminated curb blocks, 10 �� x 12� x 2�-4� (Curb blocks must meet at least TL1 specifications) Include all hardware for assembly Hodges Bridge Kit � 22� 0� x 15� 9� x 0 Degree Skew 4 � Glued-laminated Panel, 5-1/8� x 4� x 15�-9� (actual dimensions � includes 10-3/4� overhang on each side) 2 � Glued-laminated Panel, 5-1/8� x 3� x 15�-9� (actual dimensions � includes 10-3/4� overhang on each side) 13 � Running planks, 3�x12� (nominal). If treatment is considered, specify a waterborne preservative. Beveling of plank ends at approaches reduces vehicle impact forces and improves performance and longevity. Attach the running planks to the deck using spikes or lag screws. Do not use bolts. 2 � Glued-laminated curbs, 10-3/4� x 6� x 23� (actual dimensions) (Curbs must meet at least TL1 specifications) 10 � Glued-laminated curb blocks, 10-3/4� x 12� x 2�-4� (actual dimensions) (Curb blocks must meet at least TL1 specifications) Include all hardware for assembly All timber to be Copper Naphthenate treated. All hardware shall be hot dipped galvanized. The Contractor shall submit a complete Bridge Kit Submittal Package for review and approval by the Carson National Forest Engineering Groups and shall include detailed bridge plans sealed by a Professional Engineer. The Contractor shall not order any material prior to receipt of the approved Submittal Package from the Engineering Group
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/ced8dad20c504bef99161e00cbbaa12b/view)
- Place of Performance
- Address: Taos, NM 87571, USA
- Zip Code: 87571
- Country: USA
- Zip Code: 87571
- Record
- SN06228923-F 20220202/220131230109 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |